High-quality 40 mm aluminum cylinder with Nikasil coating for fan-cooled Kreidler Florett Super TS, Mustang (1965–1969), Kreidler Florett GT–TM, and other small motorcycles.
The cylinder kit can also be installed as a tuning cylinder in Kreidler models such as the K 54, K54 0, K54 0M, K 54/2A, LF – LF, LH K 54/32, etc.
The cylinder was designed to be nearly identical to the original Zeta cylinder with 5.8 PS. The durable cylinder delivers strong torque and solid performance even at high RPMs.
Scope of delivery as shown in Figure 1, including cylinder, piston kit, and gasket set.
Exhaust flange diameter: 32 mm
; Intake port: 15 x 25 mm
; Intake stud spacing: 32 mm
; Piston pin diameter: 14 mm
; Mounting hole pattern: 43.5 x 43.5 mm
Note: Please observe the installation direction during assembly. The piston is installed with the arrow pointing toward the exhaust on the exhaust side.
Brand-name product from the manufacturer NC-MOTORPARTS.
| Manufacturer | NCMotorparts |
| Material | Aluminum |
| Surface | sandblasted |
| Nominal diameter | 40 mm |
| Ø Outlet outside | 32 mm |
| Ø piston pin (B) | 14 mm |
| Thread inlet | M6x1 (standard thread) |
| Hole spacing inlet | 32 mm |
| Hole pattern [mm] | 44 x 44 |
| Outlet type | clamped |
| Number of fixing points | 4 pcs |
| Camouflaged | No |
| Area of application | Tuning |
| Kreidler |
Accessories & related products
Hot 
swiing® revival Stud Bolt, Inlet/Outlet M6x30 (Grade 10.9)
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Total length: 30 mm · Thread type: M6x1 (standard thread) · Diameter: 5.95 mm · Nominal diameter (thread): 6 mm · Strength class: 10.9 · Thread length: 12 mm
EUR 2.20
Rito crankshaft Kreidler Florett K3 42 mm stroke
Manufacturer: Rito · Area of application: Standard · Cheek type: standard · Crankshaft stroke: 42 mm · Connecting rod length center-center: 85 mm · Number of gears: 3 pcs · Number of gears: 4 pcs · Number of gears: 5 pcs · Total length of crankpin on clutch side: 64.2 mm · Total length crankpin ignition side: 63.8 mm · Ø piston pin (B): 14 mm · Ø Bearing seat (clutch side): 17 mm · Ø Bearing seat (ignition side): 17 mm · Wide crank webs: 39.9 mm
EUR 318.60
44 mm tuning cylinder | Kreidler Florett RS, RMC
Nominal diameter: 44 mm · Material: Aluminum · Camouflaged: No · Surface: sandblasted · Hole spacing inlet: 47 mm · Thread inlet: M6x1 (standard thread) · Area of application: Tuning · Ø piston pin (B): 14 mm · Outlet type: slanted · Number of fixing points: 4 pcs · Hole spacing outlet: 50 mm
EUR 355.30
EUR 294.10
Parmakit 44 mm cylinder kit tuning | Kreidler Florett RS, RMC
Nominal diameter: 44 mm · Manufacturer: Parmakit · Material: Aluminum · Surface: sandblasted · Ø Outlet outside: 32 mm · Ø piston pin (B): 14 mm · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 47 mm · Outlet type: clamped · Number of fixing points: 4 pcs · Camouflaged: No · Area of application: Tuning
EUR 367.60
Explore categories from Cylinder
Moped fans also bought
swiing® revival light switch MERIT two buttons
Manufacturer: GPO · Housing material: Steel · Surface: chrome-plated · Substructure material: Plastic · Width: 27 mm · Height: 30 mm · Functions: High beam (headlights) · Functions: Horn · Functions: Light off · Functions: Low beam · Functions: Motor stop · Total length: 55 mm · Number of positions: 3 pcs · Color: Chrome · Color: black · Ø Handlebars: 22 mm
EUR 23.20
Not in stock
Speedometer 120 km/h Ø 60 black / chrome
Material: Metal · Material: Plastic · Surface: chrome-plated · Ø outside: 64.8 mm · Maximum speed: 120 Km/h · Lighting: without · Color: Chrome · Signal type Tacho: analog · Color: black · Color: white · 4-edge speedometer cable: 1.8 mm · Total height: 70 mm · Thread type: MF10x1 (fine pitch thread) · Depth: 50 mm · Ø Receptacle: 60 mm
EUR 116.30
Working late? Evening hours on Thursday until 20:00
