Chrome-plated frame reinforcement from EBR suitable for Puch Maxi S / N mopeds.
This is often used on tuned mopeds to protect the frame from deformation due to the extra power.
The two rods have an outer diameter of 18 mm.
Length of mounting hole - stop (adjustable): Approx. 56 - 59 cm
Internal dimension for frame mount: 47 mm
Branded product from the Italian manufacturer EBR.
| Manufacturer | EWC |
| Material | Steel |
| Surface | chrome-plated |
| Color | Chrome |
| Total length | 560 - 590 mm |
| Ø outside | 18 mm |
| Mounting type | Nuts & bolts |
| Number of fixing points | 3 pcs |
| Hole spacing | 47 mm |
| Puch | E50 |
Explore categories from Formwork & frame parts
Moped fans also bought
GPO mudguard strut silver | Puch Maxi S, N
Manufacturer: GPO · Material: Steel · Outer width: 25.5 mm · Surface: varnished · Total length: 240 mm · Color: silver · Wheel size: 17 " · Distance mudguard - center hole: 197 mm · Distance mudguard - center hole: 231 mm · Mounting type: Nuts & bolts · Wide intake: 53 mm · Ø mounting hole: 6 mm · Number of fixing points: 8 pcs · Hole spacing: 34 mm · Hole spacing: 40 mm
EUR 15.30
swiing® revival 17" front fender square Inox | Puch Maxi S, N
Color: Chrome · Manufacturer: swiing® revival parts · Material: Chrome steel (colloquially known as stainless steel) · Surface: polished · Folding the ends: closed folded · Wheel size: 17 " · Shape of the mudguard: angular · Total length over ends: 565 mm · Mounting type: Nuts & bolts · Scope: 740 mm · Wide mudguard profile: 82 mm · Height of mudguard profile: 35 mm · Total height from support surface to top edge: 200 mm
EUR 42.80
swiing® revival 17" rear fender primed | Puch Maxi N
Manufacturer: swiing® revival parts · Material: Steel · Surface: primed · Color: black · Folding the ends: closed folded · Folding the ends: not folded · Wheel size: 17 " · Shape of the mudguard: angular · Total length over ends: 625 mm · Mounting type: Nuts & bolts · Scope: 940 mm · Wide mudguard profile: 82 mm · Height of mudguard profile: 35 mm · Total height from support surface to top edge: 285 mm
EUR 41.60
AKOA 21 mm intake manifold Dell'Orto PHBG plastic | Puch E50 / Z50 / ZA50 (wind cooled)
Ø inside: 20.7 mm · Color: black-matt · Manufacturer: AKOA · Material: Plastic · Number of fixing points: 2 pcs · Ø External connection: 26 mm · Mounting type: Screws · Area of application: Tuning · Hole spacing inlet: 38 mm
EUR 36.70
Not in stock
swiing® revival Screw Set, Engine, Stainless Steel, Small | Puch E50
Manufacturer: swiing® revival parts · Material: Chrome steel (colloquially known as stainless steel) · Area of application: Standard · Drive: Hexagon socket · Drive: Slot · Screw head: Countersunk head · Screw head: Cylinder head · Puch OEM number: 900.1216 · Puch OEM number: 900.1308
EUR 24.40
Self-tapping screw, Ø 2.9 x 13, pan head, Phillips, stainless steel
Material: Chrome steel (colloquially known as stainless steel) · Drive: Cross recess · Screw head: Lens head · Total length: 13 mm · Shank: No · Thread type: Sheet metal screw · Nominal diameter (thread): 2.9 mm · Thread length: 13 mm
EUR 1.10
swiing® revival screw set front fender Inox | Puch Maxi S, N
Storage method: Sack · Manufacturer: swiing® revival parts · Material: Chrome steel (colloquially known as stainless steel) · Number of components: 30 pcs · Drive: External hexagon · Drive: Slot · Thread length: 10 mm · Thread length: 15 mm · Screw head: Hexagon · Screw head: Lens head · Shank: No · Nominal diameter (thread): 5 mm · Nominal diameter (thread): 6 mm · Width across flats: 8 mm · Strength class: A2-70
EUR 15.60
Working late? Evening hours on Thursday until 20:00
