Fork bush for your moped / moped with EBR forks and 30 mm fork leg diameter.
The bush for the fork leg is made of plastic with good sliding properties. The sliding sleeve should also be greased when installed in the fork.
Ø inner: 30 mm
Ø outer: 34 mm
Length: approx. 20 mm
To fully equip a fork, you need four pieces.
Price per piece.
Branded product from the Italian manufacturer EBR.
| Manufacturer | EWC |
| Material | Plastic |
| Color | black |
| Ø inside | 30 mm |
| Total length | 20 mm |
| Ø outside | 34 mm |
| Puch |
Accessories & related products
Motorex High Pressure Grease 3000 4.5 kg
Manufacturer: Motorex · Area of application: Chemistry · Area of application: Fat · Contents [g]: 4500 g · Hazard warning: Causes serious eye irritation · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Temperature resistance (min.): -30 - 150 °C
EUR 114.70
EUR 25.49/kg
Moped fans also bought
DR 43 mm cylinder kit 12 mm KoBo | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: DR Racing Parts · Material: Gray cast iron · Surface: varnished · Camouflaged: No · Crankshaft stroke: 43 mm · Nominal diameter: 43 mm · Displacement: 65 ccm · Ø piston pin (B): 12 mm · Ø cylinder neck: 46 mm · Ø Outlet outside: 22.3 mm · Ø outlet inside: 18 mm · Area of application: Tuning · Hole pattern [mm]: 55 x 34 · Outlet type: clamped · Number of fixing points: 3 pcs · Decompressor: Yes
EUR 174.50
Not in stock
DR 43 mm cylinder kit 10 mm KoBo | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: DR Racing Parts · Material: Gray cast iron · Surface: varnished · Camouflaged: No · Crankshaft stroke: 43 mm · Nominal diameter: 43 mm · Displacement: 65 ccm · Ø piston pin (B): 10 mm · Ø cylinder neck: 46 mm · Ø Outlet outside: 22.3 mm · Ø outlet inside: 18 mm · Area of application: Tuning · Hole pattern [mm]: 55 x 34 · Outlet type: clamped · Number of fixing points: 3 pcs · Decompressor: Yes
EUR 174.50
Headlight black | Piaggio Ciao PX, C24
Manufacturer: Made in Italy · Width: 125 mm · Test mark: none · Housing material: Plastic · Switch included: Yes · Lens material: Plastic · Tension: 6 V · Tension: 12 V · Height: 90 mm · Bulb holder: P26s · Ø External connection: 6.3 mm · Area of application: Original · Area of application: Standard · Depth: 147 mm · Mounting type: Screws · Speedometer recording: 48 mm · Battery operated: No · Color: black · Number of fixing points: 2 pcs · Piaggio OEM number: 584240
EUR 46.30
GPO Brake support bolt short Inox | Puch Maxi, Supermaxi
Ø External head: 14 mm · Manufacturer: GPO · Material: Chrome steel (known as Nirosta®) · Thread type: MF10x1 (fine pitch thread) · Total length: 32 mm · Drive: Outer edge · Ø shaft: 9.8 mm · Width across flats SW: 13 mm · Width across flats SW: 17 mm · Thread length: 13 mm · Shank: Yes · Area of application: Standard · Shank length: 9.5 mm · Number of components: 3 pcs
EUR 15.80
BGS bottom bracket / bottom hole puller with slide hammer
Span: 7 mm · Span: 28 mm · Manufacturer: BGS - Do it yourself · Clamping depth: 10 mm · Clamping depth: 20 mm · Material: Steel · Surface: burnished · Surface: galvanized (blue) · Number of components: 10 pcs · Total length: 285 mm · Area of application: (Dis)assembly tool · Thread type: M10x1.5 (standard thread) · Thread type: M6x1 (standard thread) · Thread type: M8x1.25 (standard thread)
EUR 158.60
Handlebar fork plate 24 cm Puch Maxi chrome
Manufacturer: Made in Italy · Material: Steel · Surface: chrome-plated · Color: Chrome · Ø outside: 22 mm · Fork plate holder length: 75 mm · Clamping diameter: 22 mm · Height: 240 mm · Length handlebar ends: 150 mm · Crossbar: No · Width: 625 mm · Mounting type: Fork plate
EUR 58.50
Collection only possible with online purchase and appointment.
