Fan-cooled 38 mm cylinder kit with a 10 mm piston pin. This reproduction cylinder has a larger intake than the original cylinder.
Compatible with Puch X30 Velux and Puch X30 NG-2AH mopeds.
Note: For Velux engines, the small slot at the sealing surface must be filled with casting material to ensure the cylinder kit is airtight.
We recommend using Wekem 2K liquid metal, which can be found in the accessories section.
Note: Please observe the installation direction during assembly. The piston is installed with the arrow pointing toward the exhaust on the exhaust side.
A good, affordable standard replacement part. GPO – GOOD PARTS ONLY.
Nominal diameter: 38 mm · Ø outside piston (A): 37.96 mm · Ø piston pin (B): 10 mm · Compression height (C): 22.3 mm · Curvature (D): 3.6 mm · Total piston height (E): 50 mm · Number of piston rings (F): 2 pcs · Piston ring mold: Rectangular ring · Piston ring impact: Flank safety device (FS) · Piston ring height: 2 mm · Weight piston kit: 73 g
Hole pattern [mm]: 44 x 44 · Manufacturer: GPO · Material: Gray cast iron · Surface: sandblasted · Displacement: 50 ccm · Crankshaft stroke: 43 mm · Nominal diameter: 38 mm · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 32 mm · Outlet type: straight · Hole spacing outlet: 42 mm · Thread outlet: M6x1 (standard thread) · Number of fixing points: 4 pcs · Area of application: Tuning
| Puch | Z50 (X30 Velux) 2-speed MS, MV, MV50 3-speed VSD, DS, VZ, MC |
Accessories & related products
swiing® revival stud bolt M6x106 (10.9 strength class)
Manufacturer: swiing® revival parts · Thread type: M6x1 (standard thread) · Surface: galvanized (blue) · Material: Steel · Nominal diameter (thread): 6 mm · Thread length: 12 mm · Thread length: 20 mm · Total length: 106 mm · Puch OEM number: 360.1.10.034.1
EUR 2.20
38 mm cylinder head, fan-cooled | Puch X30 NG-2AH, NG-2A, N-2A, DS, MV
Material: Aluminum · Ø outside: 90 mm · Height: 35 mm · Ø cylinder: 38 mm · Candle thread: short · Number of fixing points: 4 pcs · Ø screw holder: 6.4 mm · Hole pattern [mm]: 44 x 44 · Decompressor: No · Area of application: Standard
EUR 48.90
WEKEM 2K Liquid Metal 24 ml
Temperature resistance (min.): -20 - 80 °C · Manufacturer: WEKEM · Material to be used: Aluminum · Material to be used: Ceramics · Material to be used: Metal · Material to be used: Steel · Material to be used: Wood · Contents: 24 ml · Color: gray · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: Toxic to aquatic organisms (with long-term effects) · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Type of application: 2K · Area of application: Chemistry · Alignment time: 240 sec
EUR 24.40
EUR 488.00/kg
GPO gasket set 38 mm cylinder fan-cooled | Puch X30 NG-2AH, Velux
Manufacturer: GPO · Ø outlet inside: 22 mm · Ø cylinder: 38 mm · Hole spacing inlet: 38 mm · Hole spacing outlet: 42 mm · Number of components: 4 pcs · Hole pattern [mm]: 44 x 44 mm · Decompressor: Yes · Area of application: Standard
EUR 10.90
Piston 38 mm (10 mm KoBo) short shirt | Puch fan-cooled
Ø outside piston (A): 37.96 mm · Compression height (C): 22.3 mm · Curvature (D): 3.6 mm · Total piston height (E): 50 mm · Number of piston rings (F): 2 pcs · Nominal diameter: 38 mm · Piston ring mold: Rectangular ring · Piston ring impact: Flank safety device (FS) · Piston ring height: 2 mm · Ø piston pin (B): 10 mm · Weight piston kit: 73 g
EUR 48.90
Explore categories from Cylinder
Moped fans also bought
Karcoma fuel tap M12x1 vertical (with union nut) plastic connection
Manufacturer: Karcoma · Possible lever positions: open / closed / reserve · Material lever: Metal · Filter type: Plastic net · Installation direction: vertical / vertical · Outlet direction: any · Thread type: MF12x1 (fine pitch thread) · Spare tube shape: straight · Mounting type: Union nut · Ø fuel hose connection: 6 mm · Reserve level: 50 mm
EUR 33.70
GPO gasket set 38 mm cylinder fan-cooled | Puch X30 NG-2AH, Velux
Manufacturer: GPO · Ø outlet inside: 22 mm · Ø cylinder: 38 mm · Hole spacing inlet: 38 mm · Hole spacing outlet: 42 mm · Number of components: 4 pcs · Hole pattern [mm]: 44 x 44 mm · Decompressor: Yes · Area of application: Standard
EUR 10.90
Piston 38 mm (10 mm KoBo) short shirt | Puch fan-cooled
Ø outside piston (A): 37.96 mm · Compression height (C): 22.3 mm · Curvature (D): 3.6 mm · Total piston height (E): 50 mm · Number of piston rings (F): 2 pcs · Nominal diameter: 38 mm · Piston ring mold: Rectangular ring · Piston ring impact: Flank safety device (FS) · Piston ring height: 2 mm · Ø piston pin (B): 10 mm · Weight piston kit: 73 g
EUR 48.90
Working late? Evening hours on Thursday until 20:00
