Fan-cooled 38 mm cylinder kit with a 10 mm piston pin. This reproduction cylinder is equipped with a seal, which is why it can be used as an original cylinder.
Compatible with Puch X30 Velux and Puch X30 NG-2AH / NG-2A mopeds.
Note: Please observe the installation direction during assembly. The piston must be installed with the arrow pointing toward the exhaust on the exhaust side.
Caution: For Velux engines, the small slot at the sealing surface must be filled with casting material to ensure the cylinder kit is airtight.
We recommend using Wekem 2K liquid metal, which can be found in the accessories section.
A good, affordable standard replacement part. GPO – GOOD PARTS ONLY.
Nominal diameter: 38 mm · Ø outside piston (A): 37.96 mm · Ø piston pin (B): 10 mm · Compression height (C): 22.3 mm · Curvature (D): 3.6 mm · Total piston height (E): 50 mm · Number of piston rings (F): 2 pcs · Piston ring mold: Rectangular ring · Piston ring impact: Flank safety device (FS) · Piston ring height: 2 mm · Weight piston kit: 73 g
Camouflaged: No · Manufacturer: GPO · Material: Gray cast iron · Displacement: 50 ccm · Crankshaft stroke: 43 mm · Hole spacing inlet: 32 mm · Hole spacing outlet: 42 mm · Hole spacing for cylinder mounting: 44 mm · Outlet type: straight · Number of fixing points: 4 pcs · Area of application: Standard · Nominal diameter: 38 mm
| Puch | Z50 (X30 Velux) 2-speed MS, MV, MV50 3-speed VSD, DS, VZ, MC |
Accessories & related products
swiing® revival stud bolt M6x106 (10.9 strength class)
Manufacturer: swiing® revival parts · Material: Steel · Total length: 106 mm · Surface: galvanized (blue) · Nominal diameter (thread): 6 mm · Thread type: M6x1 (standard thread) · Thread length: 12 mm · Thread length: 20 mm · Puch OEM number: 360.1.10.034.1
EUR 2.20
38 mm cylinder head, fan-cooled | Puch X30 NG-2AH, NG-2A, N-2A, DS, MV
Material: Aluminum · Ø cylinder: 38 mm · Ø outside: 90 mm · Number of fixing points: 4 pcs · Ø screw holder: 6.4 mm · Hole pattern [mm]: 44 x 44 · Candle thread: short · Decompressor: No · Height: 35 mm · Area of application: Standard
EUR 48.90
Not in stock
WEKEM 2K Liquid Metal 24 ml
Manufacturer: WEKEM · Material to be used: Aluminum · Material to be used: Ceramics · Material to be used: Metal · Material to be used: Steel · Material to be used: Wood · Contents: 24 ml · Area of application: Chemistry · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: Toxic to aquatic organisms (with long-term effects) · Color: gray · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Temperature resistance (min.): -20 - 80 °C · Type of application: 2K · Alignment time: 240 sec
EUR 24.40
EUR 488.00/kg
GPO gasket set 38 mm cylinder fan-cooled | Puch X30 NG-2AH, Velux
Manufacturer: GPO · Number of components: 4 pcs · Ø cylinder: 38 mm · Hole spacing inlet: 38 mm · Ø outlet inside: 22 mm · Hole spacing outlet: 42 mm · Hole pattern [mm]: 44 x 44 mm · Decompressor: Yes · Area of application: Standard
EUR 10.90
Piston 38 mm (10 mm KoBo) short shirt | Puch fan-cooled
Ø outside piston (A): 37.96 mm · Compression height (C): 22.3 mm · Curvature (D): 3.6 mm · Total piston height (E): 50 mm · Number of piston rings (F): 2 pcs · Piston ring mold: Rectangular ring · Piston ring impact: Flank safety device (FS) · Nominal diameter: 38 mm · Ø piston pin (B): 10 mm · Piston ring height: 2 mm · Weight piston kit: 73 g
EUR 48.90
Explore categories from Cylinder
Moped fans also bought
38 mm cylinder head, fan-cooled | Puch X30 NG-2AH, NG-2A, N-2A, DS, MV
Material: Aluminum · Ø cylinder: 38 mm · Ø outside: 90 mm · Number of fixing points: 4 pcs · Ø screw holder: 6.4 mm · Hole pattern [mm]: 44 x 44 · Candle thread: short · Decompressor: No · Height: 35 mm · Area of application: Standard
EUR 48.90
Not in stock
GPO gasket set 38 mm cylinder fan-cooled | Puch X30 NG-2AH, Velux
Manufacturer: GPO · Number of components: 4 pcs · Ø cylinder: 38 mm · Hole spacing inlet: 38 mm · Ø outlet inside: 22 mm · Hole spacing outlet: 42 mm · Hole pattern [mm]: 44 x 44 mm · Decompressor: Yes · Area of application: Standard
EUR 10.90
PUCH" seat black logo
Manufacturer: Made in Portugal · Ø Saddle tube holder: 22 mm · Material: Imitation leather · Material: Steel · Surface: varnished · Color: black · Spring-loaded: No · Lettering: Yes · Total length: 300 mm · Width: 130 mm · Width: 210 mm · Height: 110 mm · Number of fixing points: 1 pcs
EUR 67.30
Piston 38 mm (10 mm KoBo) short shirt | Puch fan-cooled
Ø outside piston (A): 37.96 mm · Compression height (C): 22.3 mm · Curvature (D): 3.6 mm · Total piston height (E): 50 mm · Number of piston rings (F): 2 pcs · Piston ring mold: Rectangular ring · Piston ring impact: Flank safety device (FS) · Nominal diameter: 38 mm · Ø piston pin (B): 10 mm · Piston ring height: 2 mm · Weight piston kit: 73 g
EUR 48.90
swiing® revival tank mount chrome | Puch X30 Sport, Velux
Manufacturer: swiing® revival parts · Material: Chrome steel (colloquially known as stainless steel) · Material: Steel · Surface: galvanized (blue) · Surface: raw · Color: Chrome · Mounting type: Nuts & bolts · Number of fixing points: 2 pcs
EUR 48.90
Working late? Evening hours on Thursday until 20:00
