41 mm gray cast iron tuning cylinder with diaphragm control, suitable for your moped, scooter, or small motorcycle equipped with a manual transmission and fan-cooled Sachs 50/2 (DE), 50/3 (DE), or 50/4 (DE) engine.
This diaphragm cylinder is suitable for Sachs 2-, 3-, and 4-speed engines with forced air cooling, which were installed in models such as the Hercules 50/ALS, 50/2 S, 50/KS, 50/2 DK, 50/3 LS, 50/4 LKS, Gritzner, and other small motorcycles.
The robust gray cast iron cylinder provides a tuning base suitable for everyday use. Even with a diameter of 41 mm, you’ll experience a significant performance boost that’s noticeable during daily riding. The diaphragm control, in combination with the appropriate mounting parts, enables a clean fuel-air mixture flow and makes the cylinder an exciting tuning option for fan-cooled Sachs engines.
Bore pattern: 51x40 mm
; Exhaust thread: M35x2
; Intake thread: M5x0.8
Note: The cylinder is shipped loose and without a piston, gasket set, studs, diaphragm gaskets, or other mounting parts.
You can find the matching cylinder head, piston, gasket set, diaphragm insert, and other components in the accessories section.
A good, affordable standard replacement part. GPO – GOOD PARTS ONLY.
| Manufacturer | GPO |
| Material | Gray cast iron |
| Surface | sandblasted |
| Displacement | 55 ccm |
| Crankshaft stroke | 42 mm |
| Nominal diameter | 41 mm |
| Hole spacing inlet | 67 mm |
| Camouflaged | No |
| Number of fixing points | 4 pcs |
| Outlet type | Union nut |
| Area of application | Tuning, Racing |
| Sachs | 50 (Fahrtwind, 1.25 / 1.5 hp, DE) 50/3 50/4 - MLFB (2.6 PS) , LKH (4.5 PS) |
Accessories & related products
Diaphragm insert Sachs 50/2
Material: Brass · Number of flaps: 2 pcs · Membrane material: Spring steel · Mounting type: Screws · Number of fixing points: 2 pcs · Ø mounting hole: 5.2 mm · Hole spacing: 67 mm · Area of application: Standard · Pony OEM number: A2624 · Sachs OEM no.: 0286 213 010
EUR 35.40
swiing® revival Stud Bolt M5x23 Inlet (Diaphragm) 10.9 | Sachs 50/2 (A3700)
Thread type: M5x0.8 (standard thread) · Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Nominal diameter (thread): 5 mm · Diameter: 4.9 mm · Total length: 23 mm · Thread length: 6 mm · Thread length: 12 mm · Area of application: Standard · Pony OEM number: A3700 · Sachs OEM no.: 0640 016 101 · Sachs OEM no.: 0640 016 102
EUR 2.20
Hot 
swiing® ingenious intermediate flange 17 mm diaphragm | Sachs 502, 50/2, 50/3, 50/4
Thread type: M5x0.8 (standard thread) · Manufacturer: swiing® ingenious parts · Material: Aluminum · Material: Steel · Surface: anodized · Surface: galvanized (blue) · Number of flaps: 2 pcs · Mounting type: Screws · Number of fixing points: 4 pcs · Thickness: 6.9 mm · Ø inside: 17 mm · Total length: 29 mm · Hole spacing: 31 mm · Hole spacing: 67 mm · Width: 80 mm · Area of application: Tuning
EUR 61.20
swiing® ingenious intermediate flange 12 mm diaphragm | Sachs 502, 50/2, 50/3, 50/4
Thread type: M5x0.8 (standard thread) · Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: anodized · Number of flaps: 2 pcs · Mounting type: Screws · Number of fixing points: 4 pcs · Ø inside: 12 mm · Hole spacing: 31 mm · Hole spacing: 67 mm · Area of application: Standard
EUR 67.30
EUR 59.90
swiing® ingenious intermediate flange 13 mm diaphragm | Sachs 502, 50/2, 50/3, 50/4
Thread type: M5x0.8 (standard thread) · Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: anodized · Number of flaps: 2 pcs · Mounting type: Screws · Number of fixing points: 4 pcs · Ø inside: 13 mm · Hole spacing: 31 mm · Hole spacing: 67 mm · Area of application: Standard · Area of application: Tuning
EUR 73.40
GPO piston 40.94 mm | Sachs 502, 50/2, 50/3, 50/4
Manufacturer: GPO · Nominal diameter: 41 mm · Ø outside piston (A): 40.94 mm · Compression height (C): 28 mm · Curvature (D): 3.2 mm · Total piston height (E): 49.4 mm · Number of piston rings (F): 2 pcs · Piston ring mold: Rectangular ring · Piston ring impact: Internal fuse (IS) · Ø piston pin (B): 12 mm · Piston ring height: 1.5 mm · Thick piston ring: 1.8 mm · Weight piston kit: 86 g
EUR 48.90
swiing® ingenious 41 mm cylinder head tuning | Sachs 50/2, 50/3, 50/4
Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: sandblasted · Ø cylinder: 41 mm · Number of fixing points: 4 pcs · Ø outside: 98 mm · Ø screw holder: 19 mm · Hole pattern [mm]: 37 x 37 · Total length: 127 mm · Candle thread: long · Decompressor: M10x1.5 · Width: 95 mm · Height: 50 mm · Area of application: Standard
EUR 84.00
Explore categories from Cylinder
Moped fans also bought
Diaphragm insert Sachs 50/2
Material: Brass · Number of flaps: 2 pcs · Membrane material: Spring steel · Mounting type: Screws · Number of fixing points: 2 pcs · Ø mounting hole: 5.2 mm · Hole spacing: 67 mm · Area of application: Standard · Pony OEM number: A2624 · Sachs OEM no.: 0286 213 010
EUR 35.40
swiing® revival Stud Bolt M5x23 Inlet (Diaphragm) 10.9 | Sachs 50/2 (A3700)
Thread type: M5x0.8 (standard thread) · Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Nominal diameter (thread): 5 mm · Diameter: 4.9 mm · Total length: 23 mm · Thread length: 6 mm · Thread length: 12 mm · Area of application: Standard · Pony OEM number: A3700 · Sachs OEM no.: 0640 016 101 · Sachs OEM no.: 0640 016 102
EUR 2.20
Hot
swiing® ingenious intermediate flange 17 mm diaphragm | Sachs 502, 50/2, 50/3, 50/4
Thread type: M5x0.8 (standard thread) · Manufacturer: swiing® ingenious parts · Material: Aluminum · Material: Steel · Surface: anodized · Surface: galvanized (blue) · Number of flaps: 2 pcs · Mounting type: Screws · Number of fixing points: 4 pcs · Thickness: 6.9 mm · Ø inside: 17 mm · Total length: 29 mm · Hole spacing: 31 mm · Hole spacing: 67 mm · Width: 80 mm · Area of application: Tuning
EUR 61.20
GPO piston 40.94 mm | Sachs 502, 50/2, 50/3, 50/4
Manufacturer: GPO · Nominal diameter: 41 mm · Ø outside piston (A): 40.94 mm · Compression height (C): 28 mm · Curvature (D): 3.2 mm · Total piston height (E): 49.4 mm · Number of piston rings (F): 2 pcs · Piston ring mold: Rectangular ring · Piston ring impact: Internal fuse (IS) · Ø piston pin (B): 12 mm · Piston ring height: 1.5 mm · Thick piston ring: 1.8 mm · Weight piston kit: 86 g
EUR 48.90
GPO 41 mm cylinder kit fan-cooled diaphragm | Sachs 50/2, 50/3, 50/4 (DE)
Nominal diameter: 41 mm · Manufacturer: GPO · Material: Gray cast iron · Surface: sandblasted · Displacement: 55 ccm · Crankshaft stroke: 42 mm · Thread inlet: M5x0.8 (standard thread) · Hole spacing inlet: 67 mm · Ø piston pin (B): 12 mm · Outlet type: Union nut · Thread outlet: M35x2 (standard thread) · Number of fixing points: 4 pcs · Hole pattern [mm]: 51 x 40 · Camouflaged: No · Area of application: Tuning
EUR 187.40
swiing® ingenious gasket cylinder head 41 mm | Sachs 503, 502, 50/2, 50/3, 50/4
Place of use: Cylinder head · Manufacturer: swiing® ingenious parts · Material: Aluminum · Nominal diameter: 41 mm · Ø cylinder: 41 mm · Thickness: 0.3 mm · Hole pattern [mm]: 37 x 37 · Ø inside: 41.7 mm · Area of application: Standard
EUR 6.00
swiing® ingenious 41 mm cylinder head tuning | Sachs 50/2, 50/3, 50/4
Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: sandblasted · Ø cylinder: 41 mm · Number of fixing points: 4 pcs · Ø outside: 98 mm · Ø screw holder: 19 mm · Hole pattern [mm]: 37 x 37 · Total length: 127 mm · Candle thread: long · Decompressor: M10x1.5 · Width: 95 mm · Height: 50 mm · Area of application: Standard
EUR 84.00
Working late? Evening hours on Thursday until 20:00
