Black, adjustable dampers with fancy red coil springs for your moped, moped and small motorcycle.
The hardness or preload of the dampers can be adjusted using the special spring mount.
Length (mount - mount): 300 mm
Outer diameter of coil spring: 50 mm
Holt diameter: 30 mm
Bush diameter to mount: 10 mm
The rear springs should always be secured with large washers to prevent the plastic bushes from shifting if lateral forces occur.
| Manufacturer | GPO |
| Mounting type | Nuts & bolts |
| Number of fixing points | 2 pcs |
| Hole spacing | 300 mm |
| Surface | varnished |
| Color | red, black |
| Damping type | Spring |
| Adjustable | Yes |
| Total length | 330 mm |
| Ø outside | 50 mm |
| Ø spars | 30 mm |
| Ø Fastening inside | 10 mm |
Accessories & related products
Loctite 243 medium-strength threadlocker 10 ml
Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Area of application: Chemistry · Contents: 10 ml · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Temperature resistance (min.): -75 - 200 °C · Type of application: 1K · Gap dimension (max.): 0.01 mm · Color: blue · Alignment time: 600 sec · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
EUR 26.90
EUR 2’690.00/l
YSS shock absorber Racing 30 cm (oil pressure)
Manufacturer: YSS · Material: Steel · Surface: varnished · Color: black · Damping type: Hydraulic (oil) · Adjustable: Yes · Ø outside: 52 mm · Ø Fastening inside: 10 mm · Ø spars: 32 mm · Total length: 335 mm · Mounting type: Nuts & bolts · Hole spacing: 330 mm · Number of fixing points: 2 pcs
EUR 171.50
swiing® revival screw set shock absorber mounting with axle galvanized | Puch Maxi S
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Thread type: M8x1.25 (standard thread) · Nominal diameter (thread): 8 mm · Drive: External hexagon · Screw head: Hexagon · Number of components: 17 pcs
EUR 14.60
swiing® revival screws & axle set shock absorber | Puch Maxi S
Manufacturer: swiing® revival parts · Material: Chrome steel (colloquially known as stainless steel) · Material: Steel · Thread type: M8x1.25 (standard thread) · Nominal diameter (thread): 8 mm · Drive: External hexagon · Screw head: Hexagon · Number of components: 17 pcs
EUR 21.90
MKX shock absorber 30 cm chrome
Manufacturer: MKX · Material: Aluminum · Material: Steel · Surface: chrome-plated · Color: Chrome · Damping type: Spring · Adjustable: Yes · Ø outside: 46 mm · Ø Fastening inside: 8 mm · Ø Fastening inside: 10 mm · Ø spars: 24 mm · Total length: 335 mm · Mounting type: Nuts & bolts · Hole spacing: 300 mm · Number of fixing points: 2 pcs
EUR 61.20
Explore categories from Shock absorber & swingarm
Moped fans also bought
Hot 
EBR fork reinforced black | Puch
Manufacturer: EWC · Material: Steel · Surface: chrome-plated · Color: Chrome · Thread type: MF26x1 (fine pitch thread) · Color: black · Adjustable: No · Spar end distance (center-center): 140 mm · Ø outer head tube: 26 mm · Total length: 580 mm · Ø head tube inside: 22 mm · Head tube length: 180 mm · Thread length: 57 mm · Fork bridge - center wheel axle: 381 mm · Distance brake cam to wheel axle center-center: 40 mm · Ø spars: 28 mm
EUR 162.90
Attention: new opening hours from 16.02.2026 & new evening sale on Thursday 17:30-20:00
