Unique racing exhaust with offset silencer suitable for various Puch mopeds.
The exhaust is characterized by its very high-quality workmanship and is sometimes referred to as one of the most powerful racing exhausts for Puch racing mopeds.
The special feature of this Homoet model is that the center section is slightly longer, resulting in more power.
Ideal for cylinder kits between 38 and 42 mm. The tuning exhaust can only be fitted to cylinders with a straight outlet.
HOMOET DEMPER exhaust system made by hand in the Netherlands.
Details
| Manufacturer | HOMOET |
| Material | Steel |
| Mounting type | Welded lug |
| Number of fixing points | 1 pcs |
| Exhaust type | Cone / double cone |
| Flame tube attachment | Flange |
Suitable for the following models
| Puch | E50 |
Accessories & related products
swiing® ingenious gasket outlet 28 mm graphite
Ø inside: 27.4 mm · Manufacturer: swiing® ingenious parts · Material: Graphite / Graphite · Thickness: 3 mm · Reinforced: No · Ø outlet inside: 28 mm · Ø screw holder: 6.6 mm · Place of use: Exhaust · Hole spacing outlet: 42.5 mm · Area of application: Tuning
EUR 9.05
Moped fans like you also bought:
swiing® ingenious pull starter Bosch / Ducati | Puch E50
Manufacturer: swiing® ingenious parts · Material: Plastic · Material: Steel · Color: Chrome · Color: black-matt · Surface: chrome-plated · Ø outside: 130 mm · Ignition system: BOSCH · Ignition system: DUCATI · Width: 150 mm · Height: 88 mm · Total length: 160 mm · Number of fixing points: 2 pcs · Hole spacing: 137.5 mm
EUR 183.30
Not in stock
swiing® revival side protection screw set black | Puch Maxi S
Manufacturer: swiing® revival parts · Material: Plastic · Material: Steel · Surface: galvanized (blue) · Surface: raw · Color: silver · Drive: Slot · Drive: Triangular head · Thread type: M5x0.8 (standard thread) · Thread length: 35 mm · Thread length: 50 mm · Total length: 47 mm · Total length: 60 mm
EUR 15.80
GPO pedal cranks chrome (pair) | Puch
Manufacturer: GPO · Material: Steel · Surface: chrome-plated · Color: Chrome · Thread type: FG14.3 (9/16" 20G) · Crank length (center-center): 156 mm · Total length: 180 mm · Ø Pedal wedge: 9.5 mm · Ø Pedal axle: 16 mm · Cranking (offset): 37 mm · Cranking (offset): 49 mm · Wide intake: 28 mm
EUR 91.60
Not so nice 
Road Master 2.25 x 17" F-323 4.P.R. Allround
Manufacturer: Road Master · Tire width [inch]: 2.25 " · Color: black · Width [inch]: 2 1/4 · Old designation: 21 x 2.25 · Speed index: B = 50 km/h · Load capacity index: 39 = 136 kg · Profile type: F-323 4.P.R. · Tire type: Allround · White wall: No · Wheel size [inch]: 17 " · Tubeless (yes/no): Tubetype TT (requires hose)
EUR 36.60
GPO Brake support bolt short Inox | Puch Maxi, Supermaxi
Thread type: MF10x1 (fine pitch thread) · Manufacturer: GPO · Material: Chrome steel (known as Nirosta®) · Drive: Outer edge · Number of components: 3 pcs · Total length: 32 mm · Ø External head: 14 mm · Shank: Yes · Ø shaft: 9.8 mm · Shank length: 9.5 mm · Thread length: 13 mm · Width across flats SW: 13 mm · Width across flats SW: 17 mm · Area of application: Standard
EUR 15.80
Hot 
Jammer racing clutch special 65 ccm and more | Puch E50
Manufacturer: Jammer · Material: Steel · Surface: galvanized (blue) · Area of application: High End · Area of application: MX · Area of application: Racing · Material addition: Steel · Area of application: Tuning · Recording type: Cone mounting · Ø outside: 92.5 mm · Number of jaws: 3 pcs · Number of springs: 3 pcs · Thickness: 19 mm
EUR 232.30
Not in stock
Collection only possible with online purchase and appointment.
