Hot 
Complete LELEU spoke wheel hub with brake anchor plate and axle for your Puch Maxi S, N and X30 Velux (except Ur-Velux) moped / moped.
The wheel hub is from new production.
The brake anchor plate was produced again in a small series using the old casting tools and therefore corresponds to the original from times gone by.
The wheel hub comes from new production, is precisely manufactured and impresses with its high-quality workmanship. The hub is equipped with deep groove ball bearings and an M11 axle.
The 36 spoke holes with a diameter of 3.7 mm are also suitable for 2.9 mm stainless steel spokes.
Note: Unfortunately, the brake pads are something that didn't convince us. We recommend replacing them with a high-quality alternative from the accessories range.
| Manufacturer | LELEU |
| Material | Aluminum |
| Ø axle | 11 mm |
| Ø outside | 115 mm |
| Axle length | 160 mm |
| Thread type | MF11x1 (fine pitch thread) |
| Ø drum | 80 mm |
| Area of application | Original |
| Number of spoke holes | 36 pcs |
| Ø spoke hole | 3.7 mm |
| Puch |
Accessories & related products
Rear wheel hub spoke 36 holes with axle (1A quality) | Puch Maxi, X30 NG-2AH
Material: Aluminum · Ø outside: 115 mm · Area of application: Standard · Width: 105 mm · Color: silver · Ø axle: 12 mm · Total length: 185 mm · Thread type: FG34.8 (1.37" 24G) · Thread type: M5x0.8 (standard thread) · Thread type: MF12x1 (fine pitch thread) · Ø drum: 80 mm · Ø bolt circle: 105.5 mm · Thread length: 12 mm · Thread length: 17 mm · Thread length: 43 mm · Number of spoke holes: 36 pcs · Ø spoke hole: 3.7 mm · Number of fixing points: 6 pcs · Puch OEM number: 349.5.41.803.1
EUR 115.90
Moped fans also bought
Motorex engine oil (gear oil) manual 450 ml
Manufacturer: Motorex · Viscosity (SAE): 80W · Oil type: GL4 · Contents [ml]: 450 ml · Gearbox type: Foot control · Gearbox type: Manual gearshift · Temperature resistance (min.): -30 - 220 °C · Area of application: Gearbox lubrication with clutch
EUR 12.10
EUR 26.89/l
GPO 17" spoke set incl. nipple (2.9 x 188 mm) Inox
Surface: raw · Nipple length: 14 mm · Manufacturer: GPO · Material: Chrome steel (known as Nirosta®) · Quantity: 36 pcs · Length from hook: 188 mm · Color: silver · Ø spoke head: 5.35 mm · Ø spoke: 2.9 mm · Nominal diameter (thread): 3.15 mm · Ø nipple head: 7.9 mm · Ø Nipple neck: 5 mm · Hook length: 9 mm · Hook angle: 95 ° · Thread length: 11 mm
EUR 67.00
Hot
swiing® ingenious 15 mm carburetor tuning camouflaged | Puch
Manufacturer: swiing® ingenious parts · Material: Aluminum · Component group Carburetor: Carburetor complete · Carburetor type: SRE · Height: 95 mm · Choke control: Hand choke · Total length: 66 mm · Nominal diameter: 15 mm · Nozzle thread: M3.5x0.6 (standard thread) · Ø fuel hose connection: 6 mm · Width: 50 mm · Nozzle size: 62 · Ø Inside entrance: 15 mm · Ø Internal connection: 20 mm · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Mixed oil connection: No · Mounting type: Plug connection clamped · Vacuum connection: No · Area of application: Tuning · Nozzle block: 2.17 · Camouflaged: Yes · Clamping screw torque (max.): 4 N/m
EUR 97.50
Collection only possible with online purchase and appointment.
