High-quality, simple number plate holder made of black plastic with «mofakult» imprint for your moped / moped.
The number holder is attached to the rear mudguard or the side number holder. There are seven attachment points available for this purpose. If new holes need to be drilled into the mudguard, marking them in advance makes it easier to position them optimally.
After the license plate holder has been attached, the number plate is then fastened with two M5 screws. Extra threaded holes have been embedded in the plastic for this purpose. The use of spring washers is recommended to secure the number plate.
You can find the corresponding screws for the number frame in the accessories section.
Merchandise product of the Swiss quality brand mofakult Merch.
| Manufacturer | mofakult Merch |
| Ø mounting hole | 6 mm |
| Material | Plastic |
| Total length | 175 mm |
| Width | 108 mm |
| Thread type | M5x0.8 (standard thread) |
| Color | black |
| Mounting type | Nuts & bolts |
| Number of fixing points | 9 pcs, 2 pcs |
| Height | 11 mm |
| Hole spacing | 50 mm |
| Thread length | 6 mm |
Accessories & related products
Plastic license plate holder (CH version)
Height: 11 mm · Width: 108 mm · Manufacturer: Made in Switzerland · Ø mounting hole: 6 mm · Material: Brass · Material: Plastic · Thread type: M5x0.8 (standard thread) · Total length: 175 mm · Hole spacing: 50 mm · Mounting type: Nuts & bolts · Thread length: 6 mm · Number of fixing points: 9 pcs · Color: black
EUR 9.65
Serrated lock washer M4 - M12 galvanized
Material: Steel · Surface: galvanized (blue) · Ø inside: 4.5 mm · Ø inside: 5.5 mm · Ø inside: 6.35 mm · Ø inside: 7.4 mm · Ø inside: 10.8 mm · Ø inside: 12.8 mm · Thread size: M10 · Thread size: M12 · Thread size: M4 · Thread size: M5 · Thread size: M6 · Thread size: M7 · Thread size: M8
EUR 0.40
M6x22 hexagon head screw, galvanized
Material: Steel · Surface: galvanized (blue) · Area of application: Standard · Thread type: M6x1 (standard thread) · Drive: External hexagon · Screw head: Hexagon · Width across flats SW: 10 mm · Number of components: 1 pcs · Color: silver · Total length: 26 mm · Thread length: 22 mm · Strength class: 8.8
EUR 1.35
Screw M5x10 pan-head hexagon socket, galvanized
Thread type: M5x0.8 (standard thread) · Material: Steel · Surface: galvanized (blue) · Screw head: Lens head · Ø External head: 9.5 mm · Width across flats SW: 3 mm · Total length: 13 mm · Shank: No · Drive: Hexagon socket · Thread length: 10 mm · Strength class: 10.9
EUR 1.10
Moped fans like you also bought:
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Manufacturer: Magura · Material: Brass · Material: Steel · Surface: nickel-plated · Thread type: M4x0.7 (standard thread) · Ø outside: 5 mm · Total length: 6 mm · Ø Cable bushing: 1.6 mm · Drive: Slot · Screw head: Lens head · Thread length: 4 mm · Number of components: 2 pcs
EUR 2.45
Continental 2.00 - 2.50 x 16" tube
Manufacturer: Continental · Tire width [inch]: 2 - 2.5 " · Width [inch]: 2 · Width [inch]: 2 1/4 · Width [inch]: 2 1/2 · Tire width [mm]: 50.8 - 63.5 · Wheel size [inch]: 16 " · Old designation: 20 x 2 · Old designation: 20 x 2.25 · Old designation: 20 x 2.5 · Tire height [%]: 100 · Valve type: TR6 car valve
EUR 17.70
Stand 14 mm axle (1A quality) | Piaggio Ciao PX, C24
Total height: 250 mm · Manufacturer: Made in Italy · Material: Steel · Surface: varnished · Stand base - center mount (A): 232 mm · Total width of stand base (B): 200 mm · Wide receptacle (C): 78 mm · Ø Receptacle (D): 14 mm · Wide upright foot (F): 20 mm · Color: black
EUR 36.50
Headlight black | Piaggio Ciao PX, C24
Width: 125 mm · Manufacturer: Made in Italy · Test mark: none · Area of application: Original · Housing material: Plastic · Area of application: Standard · Tension: 6 V · Tension: 12 V · Lens material: Plastic · Bulb holder: P26s · Ø External connection: 6.3 mm · Speedometer recording: 48 mm · Switch included: Yes · Height: 90 mm · Battery operated: No · Mounting type: Screws · Depth: 147 mm · Number of fixing points: 2 pcs · Color: black · Piaggio OEM number: 584240
EUR 46.30
Tail light black | Piaggio Ciao PX, C24, Bravo
Width: 130 mm · Manufacturer: Made in Italy · Material: Plastic · Test mark: none · Bulb holder: BA9s · Height: 58 mm · Brake light: No · Battery operated: No · Reflectors: Yes · Mounting type: Nuts & bolts · Depth: 43 mm · Number of fixing points: 2 pcs · Color: black · Color: red
EUR 23.10
Cable set black | Piaggio Ciao, SI, Bravo, Boxer
Ø Stranded wire: 1.25 mm · Ø Stranded wire: 1.5 mm · Ø Stranded wire: 1.8 mm · Nipple shape: Ball · Nipple shape: Barrel (transverse) · Nipple shape: Pears · Manufacturer: Made in Germany · Material: Steel · Quantity: 4 pcs · Total length: 1350 mm · Total length: 1600 mm · Total length: 2180 mm · Outer shell length: 1200 mm · Outer shell length: 1250 mm · Outer shell length: 1300 mm · Outer shell length: 2000 mm · Color: black
EUR 24.30
Collection only possible with online purchase and appointment.
