Clutch basket with 21 teeth, compatible with Puch Maxi mopeds equipped with an E50 engine that use a kick starter or pull-start.
The clutch basket is designed for the commonly installed 106-tooth spur gear.
You can find matching spacer washers—which are mounted in front of and behind the clutch basket—in the accessories section.
Brand-name product from the manufacturer NC-MOTORPARTS.
| Manufacturer | NCMotorparts |
| Material | Steel |
| Recording type | Interlocking |
| Toothing type | helical toothed |
| Number of teeth | 21 pcs |
| Height | 25 mm, 41 mm |
| Ø inside | 95 mm |
| Ø outside | 99.5 mm |
| Puch | E50 |
Accessories & related products
Explore categories from Clutch
Moped fans also bought
GPO Gasket Set for E50 Engine | Puch Maxi S, N
Manufacturer: GPO · Number of components: 7 pcs · Material: Aluminum · Material: Fiber · Material: Sealing carton · Material: Sealing paper · Ø outlet inside: 19.9 mm · Area of application: Standard · Hole spacing inlet: 32 - 38 mm · Decompressor: Yes · Hole pattern [mm]: 44 x 44 · Hole spacing outlet: 42 mm
EUR 12.10
EUR 10.90
swiing® revival oil filler plug with sealing ring | Puch E50
Total length: 14.6 mm · Ø External head: 14 mm · Manufacturer: swiing® revival parts · Number of components: 2 pcs · Material: Steel · Surface: galvanized (blue) · Thread type: M10x1.5 (standard thread) · Nominal diameter (thread): 10 mm · Drive: Slot · Thread length: 6 mm · Screw head: Lens head · Puch OEM number: 364.1.10.660.1
EUR 4.80
swiing® revival M8x12 oil drain plug & copper ring | Puch E50, Z50
Width across flats Screw: 13 mm · Manufacturer: swiing® revival parts · Material: Copper · Material: Steel · Surface: galvanized (blue) · Color: silver · Thread type: M8x1.25 (standard thread) · Drive: External hexagon · Drive: Slot · Thread length: 12 mm · Screw head: Hexagon · Total length: 18 mm · Puch OEM number: 901.1053
EUR 4.30
Elring Dirko HT sealing compound red (silicone) high temp. 70 ml elastic up to 315°C
Temperature resistance (min.): -60 - 300 °C · Manufacturer: Elring · Color: red · Contents: 70 ml · Hazard warning: Causes serious eye irritation · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Gap dimension (max.): 2 mm · Area of application: Chemistry
EUR 28.10
EUR 401.43/l
DMP crankshaft full cheeks with mounted bearings | Puch E50
Manufacturer: DMP · Material: Steel · Cheek type: Full cheeks · Crankshaft stroke: 43 mm · Thread type: MF10x1 (fine pitch thread) · Connecting rod length center-center: 90 mm · Thread length: 10 mm · Total length of crankpin on clutch side: 74 mm · Total length crankpin ignition side: 66 mm · Ø crank webs: 69.9 mm · Ø Connecting rod eye: 15 mm · Ø piston pin (B): 12 mm · Ø Bearing seat (clutch side): 17 mm · Ø Bearing seat (ignition side): 17 mm · Area of application: Racing · Dimension needle bearing: 12 / 15 x 14.2 mm (axe 12) · Wide crank webs: 34 mm · Length 1st paragraph: 9 mm · Length 2nd paragraph: 14.5 mm · Length 3rd paragraph: 25 mm · Ø 1st step (on the coupling side): 22 mm · Ø 2nd shoulder (on the clutch side): 17 mm · Ø 3rd step (on the clutch side): 15 mm · Length of shoulder (ignition side): 26.6 mm · Number of gears: 1 pcs
EUR 202.10
Working late? Evening hours on Thursday until 20:00
