Polini "Big Valve" 2-Valve Intake System for PHBG / CP Carburetors | Puch
“Big Valve” intake system with a two-valve diaphragm insert for PHBG / CP carburetors on your Puch moped.
Due to its design, this version is often found on the market under the name “4-valve diaphragm,” but technically it is a two-valve diaphragm insert.
Thanks to the 24 mm diameter intake port, Dell'Orto PHBG AS or CP carburetors can be used with clamps. The intake system fits the Polini 43.5 mm cylinder kit without requiring any modification or cutting of the cooling fins. After installation, the carburetor will be positioned at a slight angle to the side.
All parts shown in Figure 1 are included in the package.
You can find additional diaphragm inlets, the matching cylinder kit, as well as intake manifolds and carburetors in the accessories section.
A quality product from the Italian manufacturer Polini.
| Manufacturer | Polini |
| Camouflaged | No |
| Material | Aluminum, Plastic |
| Surface | glass bead blasted |
| Number of flaps | 4 pcs |
| Membrane material | Carbonite |
| Thread type | M5x0.8 (standard thread) |
| Thick membrane platelets | 0.3 mm |
| Ø inside | 19 mm |
| Ø outside | 24 mm |
| Number of fixing points | 4 pcs |
| Ø mounting hole | 5.2 mm |
| Mounting type | Screws |
| Area of application | Tuning, Racing |
| Puch | E50 ZA50 (fan-cooled) Z50 (X30 Sport) |
Accessories & related products
Polini 43.5 mm cylinder kit reed | Puch
Nominal diameter: 43.5 mm · Manufacturer: Polini · Material: Aluminum · Area of application: Racing · Area of application: Tuning · Displacement: 65 ccm · Surface: Nickel silicon carbide (colloquially known as Nikasil) · Crankshaft stroke: 43 mm · Ø cylinder neck: 48 mm · Ø outlet inside: 22 mm · Number of fixing points: 4 pcs · Inlet window: 26 x 21 mm · Thread inlet: M5x0.8 (standard thread) · Hole spacing inlet: 32 mm · Hole spacing inlet: 39 mm · Ø piston pin (B): 12 mm · Outlet type: straight · Hole spacing outlet: 42 mm · Thread outlet: M6x1 (standard thread) · Hole pattern [mm]: 44 x 44 · Camouflaged: No
EUR 379.90
Not in stock
GPO 43.5 mm cylinder head with O-ring, Polini Tuning new version | Puch
Manufacturer: GPO · Material: Aluminum · Area of application: Tuning · Ø cylinder: 43.5 mm · Surface: sandblasted · Total length: 140 mm · Number of fixing points: 4 pcs · Width: 135 mm · Height: 55 mm · Candle thread: short · Decompressor: No · Hole pattern [mm]: 44 x 44
EUR 66.10
Polini CP 19 mm carburetor (hand choke)
Nominal diameter: 19 mm · Manufacturer: Polini · Material: Aluminum · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Component group Carburetor: Carburetor complete · Carburetor type: CP · Nozzle size: 66 · Ø fuel hose connection: 6 mm · Ø fuel hose connection: 7 mm · Ø Internal connection: 24 mm · Ø without reducing sleeve: 26 mm · Total length: 73.5 mm · Ø Inside entrance: 19 mm · Width: 66 mm · Ø Output inside: 19 mm · Height: 135 mm · Mounting type: Plug connection clamped · Ø Air filter connection: 46 mm · Mixed oil connection: Yes · Vacuum connection: Yes · Choke control: Hand choke · Nozzle thread: M5x0.8 (standard thread) · Nozzle block: 35-12 · Camouflaged: No · Size of secondary nozzle: 42
EUR 171.50
Dell'Orto 20 mm PHBG AS carburetor hand choke
Nominal diameter: 20 mm · Manufacturer: Dell'Orto · Area of application: Tuning · Component group Carburetor: Carburetor complete · Carburetor type: PHBG AS · Nozzle size: 90 · Ø fuel hose connection: 6 mm · Ø Internal connection: 24 mm · Ø without reducing sleeve: 26 mm · Width: 75 mm · Height: 125 mm · Mounting type: Plug connection clamped · Ø Air filter connection: 32 mm · Air filter connection thread: MF32x1.25 (fine pitch thread) · Choke control: Hand choke · Choke nozzle size: 60 · Nozzle thread: M5x0.8 (standard thread) · Size of secondary nozzle: 50
EUR 171.50
Polini 43.5 mm cylinder kit reed valve with head | Puch
Nominal diameter: 43.5 mm · Manufacturer: Polini · Material: Aluminum · Area of application: Racing · Area of application: Tuning · Displacement: 65 ccm · Surface: Nickel silicon carbide (colloquially known as Nikasil) · Crankshaft stroke: 43 mm · Ø cylinder neck: 48 mm · Ø outlet inside: 22 mm · Number of fixing points: 4 pcs · Inlet window: 26 x 21 mm · Thread inlet: M5x0.8 (standard thread) · Hole spacing inlet: 32 mm · Hole spacing inlet: 39 mm · Ø piston pin (B): 12 mm · Outlet type: straight · Hole spacing outlet: 42 mm · Thread outlet: M6x1 (standard thread) · Hole pattern [mm]: 44 x 44 · Camouflaged: No
EUR 490.20
Not in stock
Polini 43.5 mm cylinder head | Puch
Manufacturer: Polini · Material: Aluminum · Area of application: Racing · Area of application: Tuning · Ø cylinder: 43.5 mm · Total length: 145 mm · Number of fixing points: 4 pcs · Width: 135 mm · Height: 48 mm · Candle thread: long · Decompressor: No · Hole pattern [mm]: 44 x 44
EUR 97.90
Explore categories from Carburetor & intake system
Moped fans also bought
Polini 43.5 mm cylinder kit reed | Puch
Nominal diameter: 43.5 mm · Manufacturer: Polini · Material: Aluminum · Area of application: Racing · Area of application: Tuning · Displacement: 65 ccm · Surface: Nickel silicon carbide (colloquially known as Nikasil) · Crankshaft stroke: 43 mm · Ø cylinder neck: 48 mm · Ø outlet inside: 22 mm · Number of fixing points: 4 pcs · Inlet window: 26 x 21 mm · Thread inlet: M5x0.8 (standard thread) · Hole spacing inlet: 32 mm · Hole spacing inlet: 39 mm · Ø piston pin (B): 12 mm · Outlet type: straight · Hole spacing outlet: 42 mm · Thread outlet: M6x1 (standard thread) · Hole pattern [mm]: 44 x 44 · Camouflaged: No
EUR 379.90
Not in stock
Hot 
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Nipple shape: Cylinder · Ø nipple: 3 mm · Nipple length: 5 mm · Manufacturer: Made in Germany · Area of application: Standard · Material: Steel · Surface: galvanized (blue) · Ø Stranded wire: 1.25 mm · Cable length: 2200 mm · Number of components: 1 pcs
EUR 2.95
Polini CP 19 mm carburetor (hand choke)
Nominal diameter: 19 mm · Manufacturer: Polini · Material: Aluminum · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Component group Carburetor: Carburetor complete · Carburetor type: CP · Nozzle size: 66 · Ø fuel hose connection: 6 mm · Ø fuel hose connection: 7 mm · Ø Internal connection: 24 mm · Ø without reducing sleeve: 26 mm · Total length: 73.5 mm · Ø Inside entrance: 19 mm · Width: 66 mm · Ø Output inside: 19 mm · Height: 135 mm · Mounting type: Plug connection clamped · Ø Air filter connection: 46 mm · Mixed oil connection: Yes · Vacuum connection: Yes · Choke control: Hand choke · Nozzle thread: M5x0.8 (standard thread) · Nozzle block: 35-12 · Camouflaged: No · Size of secondary nozzle: 42
EUR 171.50
Polini 43.5 mm cylinder kit reed valve with head | Puch
Nominal diameter: 43.5 mm · Manufacturer: Polini · Material: Aluminum · Area of application: Racing · Area of application: Tuning · Displacement: 65 ccm · Surface: Nickel silicon carbide (colloquially known as Nikasil) · Crankshaft stroke: 43 mm · Ø cylinder neck: 48 mm · Ø outlet inside: 22 mm · Number of fixing points: 4 pcs · Inlet window: 26 x 21 mm · Thread inlet: M5x0.8 (standard thread) · Hole spacing inlet: 32 mm · Hole spacing inlet: 39 mm · Ø piston pin (B): 12 mm · Outlet type: straight · Hole spacing outlet: 42 mm · Thread outlet: M6x1 (standard thread) · Hole pattern [mm]: 44 x 44 · Camouflaged: No
EUR 490.20
Not in stock
Working late? Evening hours on Thursday until 20:00
