- 16 %
Not so nice 
Copy of the KTM SX50 clutch suitable for all Puch Maxi mopeds / mopeds with E50 engine.
Attention: The clutch hub does not fit Puch Maxi crankshafts as the cone is not correct.
The cone can either be reworked or alternatively the high-quality matching MBR clutch star, which is listed under accessories, can be used.
Tightening torque on crankshaft: 35 - 40 Nm
Tightening torque screws for jaws: 10 Nm
The fastening nut is not included in the scope of delivery.
Mäsig-läsig! – We strive to offer you the widest range of moped spare parts. However, this product is of rather poor quality and is not recommended by us. Should you nevertheless choose this item, we understand, but cannot offer you any guarantee or exchange.
The clutch is a cheap replica, the clutch linings therefore last less than the original KTM linings. During tests in our racing team, the clutch usually lasted between 1 and 2 hours, after which the linings had to be replaced. The star, the springs and also the fastening screws are advantageously used from the original KTM clutch.
High-quality alternatives can be found in the accessories section.
| Area of application | Tuning |
| Recording type | Cone mounting |
| Number of jaws | 3 pcs |
| Puch | E50 |
Ratings
Accessories & related products
MBR Clutch KTM SX50 | Puch E50
Manufacturer: MBR · Material: Steel · Material addition: Aluminum · Recording type: Cone mounting · Number of jaws: 3 pcs · Number of springs: 3 pcs · Area of application: High End · Area of application: MX · Area of application: Racing · Area of application: Tuning
EUR 404.80
Explore categories from Clutch
Moped fans also bought
- 12 %
Hot 
KMC drive chain 415H (reinforced) 128L
Manufacturer: KMC · Material: Steel · Surface: blank / oiled · Chain pitch: 1/2" x 3/16" · Chain type: 415H · Ø Pin: 3.94 mm · Rolling circumference: 1626 mm · Number of chain links: 128 pcs · Chain lock type: Spring lock · Ø bore: 4 mm · Color: gray
EUR 14.90
EUR 13.00
GPO gasket set | Puch E50
Manufacturer: GPO · Material: Aluminum · Material: Fiber · Material: Sealing carton · Material: Sealing paper · Area of application: Standard · Ø outlet inside: 19.9 mm · Hole spacing inlet: 32 - 38 mm · Hole spacing outlet: 42 mm · Hole pattern [mm]: 44 x 44 · Number of components: 7 pcs · Decompressor: Yes
EUR 11.80
BOSCH screw-in condenser | Bosch / Ducati
Manufacturer: BOSCH · Capacity: 0.2 µF · Area of application: Original · Area of application: Standard · Ø outside: 18 mm · Mounting type: Plug connection clamped · Connection type: Thread for screwing · Thread type: M3x0.5 (standard thread) · Height: 27 mm · Total height: 33.5 mm · Alternative version of the Pony OEM number: A2090 · Pony OEM number: A2092 · Alternative version of the Sachs OEM number: 0265 052 003 · Sachs OEM no.: 0265 052 007 · BOSCH OEM number: 2 207 330 050
EUR 23.70
BOSCH breaker with cable | Bosch / Ducati
Manufacturer: BOSCH · Material: Steel · Ø Internal flywheel: 90 mm · Area of application: Original · Area of application: Standard · Cable length: 100 mm · Cable available: Yes · Ø axle: 4 mm · Ø mounting hole: 4.5 mm · Number of fixing points: 1 pcs · Alternative version of the Pony OEM number: A4606 · Alternative version of the Pony OEM number: A4606A · Pony OEM number: A4607 · Sachs OEM no.: 0283 116 102 · Alternative version of the Sachs OEM number: 0983 106 000 · Alternative version of the Sachs OEM number: 2783 039 001 · BOSCH OEM number: 1 217 013 025 · BERU OEM number: 0 340 100 710
EUR 23.70
DUCATI ignition coil (1A quality)
Manufacturer: DUCATI · Place of use: Internal (in the ignition) · Ø Internal flywheel: 90 mm · Area of application: Original · Area of application: Standard · Color: black · Ø cable holder: 5.9 mm · Cable length: 37 mm · Total length: 76.5 mm · Mounting type: Screws · Number of fixing points: 2 pcs · Ø mounting hole: 4.6 mm · Height: 17 mm · Hole spacing: 54 mm · Pony OEM number: A2114 · Alternative version of the Pony OEM number: A2116 · Alternative version of the Pony OEM number: A2118 · Pony OEM number: A5524 · Alternative version of the Sachs OEM number: 0265 142 002 · Alternative version of the Sachs OEM number: 0265 142 004 · Sachs OEM no.: 0265 132 100 · Sachs OEM no.: 0265 203 001
EUR 77.30
swiing® ingenious crankshaft "High End" | Tomos Classic, Quadro, Sprint, Fun Sport'R
Thread type: MF10x1 (fine pitch thread) · Manufacturer: swiing® ingenious parts · Area of application: Racing · Cheek type: Full cheeks · Connecting rod length center-center: 90 mm · Total length of crankpin on clutch side: 93 mm · Total length crankpin ignition side: 64 mm · Ø crank webs: 70 mm · Ø piston pin (B): 12 mm · Wide crank webs: 34 mm · Tomos OEM number: 223421
EUR 160.70
Not in stock
Collection only possible with online purchase and appointment.
