Stator for the electronic ignition on your Piaggio Ciao, Si, Bravo and Boxer mopeds
The quality of the armature plate won't knock anyone off their saddle, but it has been tested by us and works as it should.
Technical data:
- Voltage: 12 volts
- Power: 90 watts
- Yellow output: light
- Brown output: brake light (if present)
- Blue output: indicators (if present)
Advantages of the CDI ignition:
- optimal ignition timing at any engine speed
- always a strong, constant ignition spark
- no more misfiring
- possibility to connect several consumers
- Optimized ignition timing at any engine speed
- Always a strong, constant ignition spark
- No more misfiring
- Possibility to connect several consumers
- ;possibility to connect several consumers
- no need to adjust the ignition
- little to no wear and tear
Note: This ignition only fits on housings that are designed for electronic ignition. In addition to some original Piaggio housings, this also includes the Polini Speed Engine and the Malossi racing housing.
You need 12V bulbs for ELO ignitions and must also install a voltage regulator to prevent the bulbs from burning out.
You can find a voltage regulator, the matching flywheel and other parts for your electric ignition in the accessories section.
Original Piaggio spare part number: 219965
Good-quality reproduction product from the Asian market.
| Ø outside | 105 mm |
| Manufacturer | Quenching |
| Ø inside | 29.5 mm |
| Number of cables | 6 pcs |
| Performance | 90 W |
| Cable length | 100 mm |
| Tension | 12 V |
| Number of fixing points | 3 pcs |
| Hole spacing | 34.5 mm |
| Piaggio | Ciao - P , SC , PX , C24 Si Bravo / Super Bravo Boxer Grillo |
Accessories & related products
- 10 %
Hot 
BERU spark plug connector 1 kΩ interference suppressed
Ø cable: 5 mm · Ø cable: 7 mm · Manufacturer: BERU · Material: Sheet metal (steel) · Color: silver · Spark plug socket: M4 · Cable available: No · Suppressed: Yes · Resistance: 1000 Ω · Subcategory: Spark plug connector · Pony OEM number: A2099 · Sachs OEM no.: 0265 100 00
EUR 10.80
EUR 9.70
Loctite 243 medium-strength threadlocker 10 ml
Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Area of application: Chemistry · Contents: 10 ml · Color: blue · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Temperature resistance (min.): -75 - 200 °C · Gap dimension (max.): 0.01 mm · Type of application: 1K · Alignment time: 600 sec · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
EUR 26.90
EUR 2’690.00/l
GPO stator electronic ignition with light (three outputs) | Piaggio Ciao, SI, Bravo, Boxer
Ø outside: 105 mm · Number of cables: 6 pcs · Manufacturer: GPO · Ø inside: 29.5 mm · Number of fixing points: 3 pcs · Performance: 90 W · Tension: 12 V · Cable length: 100 mm · Cable length: 400 mm · Hole spacing: 34.5 mm · Piaggio OEM number: 219965
EUR 147.00
GPO flywheel 800 g full cheek shaft electronic ignition | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: GPO · Material: Aluminum · Direction of rotation: right · Ø Flywheel outside: 139.5 mm · Thread type: MF17x1 (fine pitch thread) · Ø Internal flywheel: 106 mm · Weight: 800 g · Alternative version of the Piaggio OEM number: 181103 · Alternative version of the Piaggio OEM number: 2238183
EUR 162.90
GPO flywheel 1300 g full cheek shaft electronic ignition | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: GPO · Material: Aluminum · Thread type: MF17x1 (fine pitch thread) · Direction of rotation: right · Ø Flywheel outside: 139.5 mm · Ø Internal flywheel: 106 mm · Weight: 1300 g · Alternative version of the Piaggio OEM number: 181103 · Alternative version of the Piaggio OEM number: 2238183
EUR 162.90
Moped fans also bought
swiing® ingenious puller flywheel | Piaggio Ciao, SI, Bravo, Boxer
Diameter: 12 mm · Diameter: 24 mm · Width across flats trigger: 10 mm · Width across flats trigger: 17 mm · Width across flats Screw: 19 mm · Manufacturer: swiing® ingenious parts · Total length: 100 mm · Area of application: (Dis)assembly tool · Material: Steel · Surface: blackened · Surface: galvanized (blue) · Number of components: 3 pcs · Thread type: MF12x1.5 (fine pitch thread) · Thread type: MF17x1 (fine pitch thread)
EUR 21.90
GPO ignition coil CDI | Piaggio Ciao, SI, Bravo, Boxer
Place of use: External (outside the ignition) · Manufacturer: GPO · Height: 35.5 mm · Area of application: Original · Area of application: Performance · Area of application: Standard · Color: black · Ø cable holder: 7.9 mm · Total length: 95 mm · Mounting type: Screws · Number of fixing points: 2 pcs · Ø mounting hole: 5.7 mm · Cable length: 192 mm · Hole spacing: 33 mm
EUR 48.90
Polini Speed Engine engine housing electronic ignition | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: Polini · Width: 175 mm · Height: 104 mm · Total length: 215 mm · Material: Aluminum · Surface: sandblasted · Color: silver · Crankshaft stroke: 43 mm · Stock number: 6202 · Ignition type: Electronic
EUR 257.30
SKF 6202 C3 ball bearing 15/35/11
Stock number: 6202 · Inner ring width: 11 mm · Manufacturer: SKF · Bearing clearance: C3 · Bearing cage: Sheet steel cage ball-guided · Bearing type: Deep groove ball bearing · Ø inside: 15 mm · Ø outside: 35 mm · Width: 11 mm · Puch OEM number: 900.4.6202
EUR 12.10
Attention: new opening hours from 16.02.2026 & new evening sale on Thursday 17:30-20:00
