Cylinder cover with 45 mm combustion chamber diameter suitable for your Puch X30 Velux moped / moped with EX30 (Z50) engine as well as for your Puch X30 NG-2AH with blown ZA50 engine.
The optimized combustion chamber geometry increases both efficiency and combustion speed. Thanks to the slightly thicker cooling fins, the cylinder head offers a long service life and suitability for everyday use, as they absorb vibrations significantly better than thinner fins.
| Manufacturer | swiing® ingenious parts |
| Material | Aluminum |
| Ø cylinder | 45 mm |
| Ø outside | 90 mm |
| Area of application | Tuning, Racing |
| Hole pattern [mm] | 44 x 44 |
| Candle thread | short |
| Decompressor | No |
| Number of fixing points | 4 pcs |
| Puch | ZA50 (fan-cooled) Z50 (X30 Velux) |
Ratings
Accessories & related products
BAD ASS Lucifer BigBore cylinder kit Ø 45 mm | Puch X30 Velux, NG-2AH
Manufacturer: BAD ASS · Material: Gray cast iron · Area of application: Tuning · Displacement: 70 ccm · Crankshaft stroke: 43 mm · Nominal diameter: 45 mm · Ø cylinder neck: 49 mm · Ø Outlet outside: 26 mm · Ø outlet inside: 25 mm · Ø Inlet inside: 19 mm · Thread inlet: M6x1 (standard thread) · Hole pattern [mm]: 44 x 44 · Hole spacing inlet: 32 mm · Ø piston pin (B): 12 mm · Number of fixing points: 4 pcs · Outlet type: straight · Hole spacing outlet: 42 mm · Thread outlet: M6x1 (standard thread)
EUR 306.30
swiing® revival 38 mm cylinder head | Puch EX30 (Z50), ZA50 (fan-cooled)
Manufacturer: swiing® revival parts · Ø outside: 90 mm · Material: Aluminum · Ø cylinder: 38 mm · Hole pattern [mm]: 44 x 44 · Candle thread: short · Decompressor: No · Number of fixing points: 4 pcs · Puch OEM number: 320.2.10.001.1
EUR 73.40
swiing® ingenious 42 mm cylinder head | Puch EX30 (Z50), ZA50 (fan-cooled)
Manufacturer: swiing® ingenious parts · Ø outside: 90 mm · Material: Aluminum · Area of application: Tuning · Ø cylinder: 42 mm · Hole pattern [mm]: 44 x 44 · Candle thread: short · Decompressor: No · Number of fixing points: 4 pcs
EUR 73.40
swiing® ingenious 47 mm cylinder head | Puch EX30 (Z50), ZA50 (fan-cooled)
Manufacturer: swiing® ingenious parts · Ø outside: 90 mm · Material: Aluminum · Area of application: Racing · Area of application: Tuning · Ø cylinder: 47 mm · Hole pattern [mm]: 44 x 44 · Candle thread: short · Decompressor: No · Number of fixing points: 4 pcs
EUR 73.40
swiing® ingenious 40 mm cylinder head | Puch EX30 (Z50), ZA50 (fan-cooled)
Manufacturer: swiing® ingenious parts · Ø outside: 90 mm · Material: Aluminum · Area of application: Tuning · Ø cylinder: 40 mm · Hole pattern [mm]: 44 x 44 · Candle thread: short · Decompressor: No · Number of fixing points: 4 pcs
EUR 73.40
swiing® ingenious 41 mm cylinder head | Puch EX30 (Z50), ZA50 (fan-cooled)
Manufacturer: swiing® ingenious parts · Ø outside: 90 mm · Material: Aluminum · Area of application: Tuning · Ø cylinder: 41 mm · Hole pattern [mm]: 44 x 44 · Candle thread: short · Decompressor: No · Number of fixing points: 4 pcs
EUR 73.40
Explore categories from Cylinder
Moped fans also bought
Oil seal NBR 17/28/7 AS Pinion shaft | Puch Z50
Temperature resistance (min.): -30 - 100 °C · Shaft seal type: AS - With rubberized outer casing / one sealing lip / one dust lip. · Place of use: Pinion shaft · Manufacturer: Puch · Ø inside: 17 mm · Ø outside: 28 mm · Material: NBR · Area of application: Standard · Surface: rubberized · Width: 7 mm
EUR 6.00
MVT internal rotor ignition incl. rev limiter & light 12V | Puch / Sachs
Manufacturer: MVT Allumage · Manufacturer: swiing® ingenious parts · Weight: 268 g · Area of application: Tuning · Direction of rotation: left · Ø mounting plate: 96 mm · Tension: 12 V · Ø Flywheel outside: 49.2 mm · Ø cable: 7 mm · Performance: 65 W · Number of fixing points: 2 pcs · Mounting type: Screws
EUR 447.30
SKF 6202 Ball bearing 15/35/11
Bearing cage: Sheet steel cage ball-guided · Inner ring width: 11 mm · Manufacturer: SKF · Ø inside: 15 mm · Ø outside: 35 mm · Bearing clearance: CN (standard) · Stock number: 6202 · Bearing type: Deep groove ball bearing · Width: 11 mm · Piaggio OEM number: 102258
EUR 15.80
BAD ASS Lucifer BigBore cylinder kit Ø 45 mm | Puch X30 Velux, NG-2AH
Manufacturer: BAD ASS · Material: Gray cast iron · Area of application: Tuning · Displacement: 70 ccm · Crankshaft stroke: 43 mm · Nominal diameter: 45 mm · Ø cylinder neck: 49 mm · Ø Outlet outside: 26 mm · Ø outlet inside: 25 mm · Ø Inlet inside: 19 mm · Thread inlet: M6x1 (standard thread) · Hole pattern [mm]: 44 x 44 · Hole spacing inlet: 32 mm · Ø piston pin (B): 12 mm · Number of fixing points: 4 pcs · Outlet type: straight · Hole spacing outlet: 42 mm · Thread outlet: M6x1 (standard thread)
EUR 306.30
Attention: new opening hours from 16.02.2026 & new evening sale on Thursday 17:30-20:00
