Brake cam suitable for brake anchor plates on the front wheel of your Puch Maxi S & N moped.
This CNC turned part fits all old brake discs where the brake cams and the brake lever are bolted together.
The galvanized brake cam is in no way inferior to the original SGDG / LELEU brake cams in terms of workmanship and functionality.
Width of square: 9 x 9 mm
Width of diagonal: 6 mm
Total length: 38.2 mm
Thread: M6x1 mm
Material: steel
Surface: galvanized
Complete brake anchor plates, brake shoes and the cam for the rear wheel can be found in the accessories section.
Nostalgic product for the highest demands of the quality brand swiing®.
| Manufacturer | swiing® revival parts |
| Material | Steel |
| Surface | galvanized (blue) |
| Thread type | M6x1 (standard thread) |
| Height | 38.2 mm |
| Puch | E50 ZA50 (air-cooled) ZA50 (fan-cooled) |
Ratings
Accessories & related products
swiing® revival brake support bolt short Inox | Puch Maxi, Supermaxi
Manufacturer: swiing® revival parts · Number of components: 3 pcs · Material: Chrome steel (colloquially known as stainless steel) · Thread type: MF10x1 (fine pitch thread) · Total length: 32 mm · Drive: Outer edge · Ø External head: 14 mm · Shank: Yes · Ø shaft: 9.8 mm · Shank length: 9.5 mm · Area of application: Standard · Width across flats: 13 mm · Width across flats: 17 mm · Thread length: 13 mm
EUR 15.80
swiing® revival rear brake anchor plate | Puch Maxi S, X30 NG
Manufacturer: swiing® revival parts · Ø outside: 91 mm · Total length: 187 mm · Material: Steel · Surface: galvanized (blue) · Ø External brake pads: 80 mm · Ø axle: 12 mm · Ø bore: 12.2 mm · Ø shaft: 10 mm · Wide cam holder: 12 mm · Cranking (offset): 8 mm · Brake lever length (lever length): 55 mm · Ø screw holder: 6.5 mm
EUR 85.60
swiing® revival rear brake anchor plate | Puch Maxi N
Material: Steel · Manufacturer: swiing® revival parts · Surface: galvanized (blue) · Ø shaft: 10 mm · Ø External brake pads: 80 mm · Ø bore: 12.2 mm · Ø axle: 12 mm · Ø outside: 92 mm · Total length: 135 mm · Wide cam holder: 12 mm · Cranking (offset): 10 mm · Brake lever length (lever length): 68 mm · Ø screw holder: 6.5 mm
EUR 91.70
Moped fans also bought
Hot 
KMC drive chain 415H (reinforced) 128L
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Manufacturer: KMC · Material: Steel · Surface: blank / oiled · Color: gray · Number of chain links: 128 pcs · Rolling circumference: 1626 mm · Chain lock type: Spring lock · Ø bore: 4 mm · Ø Pin: 3.94 mm
EUR 15.30
Inox
Hot
GPO license plate holder Inox (CH version)
Width: 105 mm · Manufacturer: GPO · Material: Chrome steel (colloquially known as stainless steel) · Color: silver · Total length: 145 mm · Height: 5.3 mm · Mounting type: Nuts & bolts · Ø mounting hole: 5 mm · Hole spacing: 30 mm · Hole spacing: 50 mm · Thread type: M5x0.8 (standard thread) · Thread length: 8 mm · Number of fixing points: 2 pcs
EUR 13.30
Magura cable clamp Ø 8 x 15 mm
Manufacturer: Magura · Material: Brass · Material: Steel · Surface: galvanized (blue) · Surface: nickel-plated · Ø Cable bushing: 2.3 mm · Ø Bundle: 6 mm · Thread length: 7 mm · Screw head: Hexagon · Ø outside: 8 mm · Total length: 15 mm · Width across flats: 7 mm · Drive: External hexagon · Drive: Slot · Area of application: Standard · Thread type: M6x1 (standard thread)
EUR 3.05
swiing® revival rear brake anchor plate | Puch Maxi N
Material: Steel · Manufacturer: swiing® revival parts · Surface: galvanized (blue) · Ø shaft: 10 mm · Ø External brake pads: 80 mm · Ø bore: 12.2 mm · Ø axle: 12 mm · Ø outside: 92 mm · Total length: 135 mm · Wide cam holder: 12 mm · Cranking (offset): 10 mm · Brake lever length (lever length): 68 mm · Ø screw holder: 6.5 mm
EUR 91.70
Collection only possible with online purchase and appointment.
