Set of clamping shells for mounting the handlebars on the fork plate of original and reproduction forks of various Puch mopeds / mopeds.
Outer dimensions (lxwxh): 47 x 17 x 26 mm
Hole spacing: 30 mm
Ø bore: 7.3 mm
Material: aluminium, transparent anodized
Matching mounting screws, fork clamps and other mounting brackets can be found in the accessories section.
Nostalgic product for the highest demands of the quality brand swiing®.
| Ø mounting hole | 7.3 mm |
| Manufacturer | swiing® revival parts |
| Material | Aluminum |
| Surface | anodized |
| Clamping diameter | 22 mm |
| Total length | 47 mm |
| Height | 26 mm |
| Number of fixing points | 2 pcs |
| Hole spacing | 30 mm |
| Width | 17 mm |
| Puch |
Ratings
Accessories & related products
Loctite 243 medium-strength threadlocker 10 ml
Temperature resistance (min.): -75 - 200 °C · Color: blue · Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Contents: 10 ml · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Area of application: Chemistry · Adhesion: medium strength · Type of application: 1K · Gap dimension (max.): 0.01 mm · Alignment time: 600 sec · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
EUR 27.00
EUR 2’700.00/l
Screw M7x40 cylinder head hexagon socket, galvanized (clamping bridge)
Manufacturer: Made in Italy · Thread length: 40 mm · Material: Steel · Surface: galvanized (blue) · Drive: Hexagon socket · Screw head: Cylinder head · Thread type: M7x1 (standard thread) · Shank: No · Width across flats: 6 mm · Strength class: 8.8
EUR 2.95
66HEROES Clamping bridges aluminum black | Puch
Number of fixing points: 2 pcs · Ø mounting hole: 7.3 mm · Manufacturer: 66HEROES · Total length: 49 mm · Color: black-matt · Surface: anodized · Material: Aluminum · Clamping diameter: 22 mm · Width: 22 mm · Hole spacing: 30 mm · Height: 26 mm
EUR 35.70
swiing® revival clamping bridges aluminum green | Puch
Ø mounting hole: 7.3 mm · Manufacturer: swiing® revival parts · Material: Aluminum · Surface: anodized · Color: green · Clamping diameter: 22 mm · Total length: 47 mm · Number of fixing points: 2 pcs · Height: 26 mm · Hole spacing: 30 mm · Width: 17 mm
EUR 29.50
swiing® revival clamping bridges aluminum blue | Puch
Ø mounting hole: 7.3 mm · Manufacturer: swiing® revival parts · Material: Aluminum · Surface: anodized · Color: blue · Clamping diameter: 22 mm · Total length: 47 mm · Number of fixing points: 2 pcs · Height: 26 mm · Hole spacing: 30 mm · Width: 17 mm
EUR 29.50
Moped fans also bought
GPO 15 mm carburetor tuning | Puch
Nominal diameter: 15 mm · Material: Aluminum · Total length: 66 mm · Height: 95 mm · Manufacturer: GPO · Component group Carburetor: Carburetor complete · Carburetor type: SRE · Width: 50 mm · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Ø fuel hose connection: 6 mm · Mounting type: Plug connection clamped · Nozzle size: 62 · Ø Inside entrance: 15 mm · Ø Internal connection: 20 mm · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Area of application: Tuning · Mixed oil connection: No · Vacuum connection: No · Nozzle block: 2.17 · Camouflaged: No · Clamping screw torque (max.): 4 N/m
EUR 80.10
Starter cable Ø 1.5 mm x 160 cm | Puch Maxi
Material: Steel · Ø Stranded wire: 1.5 mm · Nipple shape: Barrel (transverse) · Ø nipple: 8 mm · Nipple length: 12 mm · Manufacturer: Made in Germany · Number of components: 1 pcs · Surface: galvanized (blue) · Cable length: 1600 mm · Area of application: Standard
EUR 2.95
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Possible lever positions: open / closed / reserve · Material lever: Metal · Filter type: Plastic net · Ø fuel hose connection: 6 mm · Mounting type: Union nut · Installation direction: horizontal / horizontal · Outlet direction: below · Thread type: MF12x1 (fine pitch thread) · Spare tube shape: curved · Reserve level: 70 mm
EUR 12.20
swiing® revival screw M7x35 clamping bridge | Puch
Material: Steel · Total length: 41.6 mm · Manufacturer: swiing® revival parts · Number of components: 1 pcs · Surface: galvanized (blue) · Drive: Hexagon socket · Screw head: Cylinder head · Ø External head: 10.5 mm · Thread length: 34.6 mm · Thread type: M7x1 (standard thread) · Shank: No · Width across flats: 5 mm · Strength class: 8.8 · Area of application: Standard
EUR 3.60
Exhaust 22 mm 2-piece replica (with number) | Puch
Material: Steel · Color: Chrome · Total length: 920 mm · Number of fixing points: 4 pcs · Manufacturer: Made in Portugal · Ø outside: 58 mm · Surface: chrome-plated · Mounting type: Stud bolts & nuts · Mounting type: Welded lug · Ø Flame tube outside: 22 mm · Exhaust type: Flute · Flame tube attachment: Flange
EUR 80.10
GPO 44 mm cylinder head | Puch Maxi S, N / X30 NS, NL, N-2AH
Material: Aluminum · Total length: 135 mm · Height: 55 mm · Number of fixing points: 4 pcs · Manufacturer: GPO · Surface: sandblasted · Ø cylinder: 44 mm · Width: 125 mm · Candle thread: short · Area of application: Tuning · Hole pattern [mm]: 44 x 44 · Decompressor: No · Camouflaged: Yes
EUR 53.00
Transval speedometer drive 17" with grease nipple
Material: Aluminum · Color: gray · Ø mounting hole: 11 mm · Manufacturer: Transval · Ø outside: 41 mm · Place of use: left · Place of use: right · 4-edge speedometer cable: 1.8 mm · Overall width outside: 60 mm · Ø axle: 11 mm · Thread type: MF10x1 (fine pitch thread) · Wheel size: 17 " · Total height: 52 mm
EUR 36.90
Collection only possible with online purchase and appointment.
