Drive cone compatible with coaster-brake bikes such as your Puch X30 Sport NS / NL, Puch X30 Velux with EX30 (Z50 engine), Puch Maxi S2, Zündapp Belmondo, and various mopeds with manual-shift Sachs 50/2 and 503 engines.
This high-quality coaster brake cone is precision-engineered for a perfect fit and offers a long service life.
You can find additional coaster brake parts—such as a drive sprocket, a clutch bushing, and a complete set—in the accessories section.
A nostalgic product from the premium swiing® brand that meets the highest standards.
Original Puch part number: 320.4.41.023.1
Original Sachs part number: 0806 101 000, F.1513
| Manufacturer | swiing® revival parts |
| Material | Steel |
| Surface | Hardened |
| Puch OEM number | 320.4.41.023.1 |
| Sachs OEM no. | 0806 101 000, F.1513 |
| Puch |
| Sachs |
| Zündapp Belmondo |
| Cilo |
Accessories & related products
swiing® revival wheel bearing 25/37/6.3 coaster wheel
Bearing type: Ball ring · Stock number: K042 · Inner ring width: 25 mm · Ball bearing closed: No · Manufacturer: swiing® revival parts · Bearing cage: Sheet steel cage ball-guided · Ø ball: 6.34 mm · Groove ring: No · Area of application: Standard · Material: Steel · Width: 6.8 mm · Ø inside: 25 mm · Ø outside: 36 mm
EUR 9.70
swiing® revival ball bearing 25.5/6.3 coaster brake driver
Ball bearing closed: No · Manufacturer: swiing® revival parts · Bearing clearance: CN (standard) · Bearing cage: Sheet steel cage ball-guided · Groove ring: No · Material: Steel · Ø ball: 6.34 mm · Bearing type: Ball ring · Ø outside: 25.5 mm · Puch OEM number: 900.6909 · Sachs OEM no.: F 4762
EUR 8.45
Not in stock
swiing® revival wheel axle M10.5x1 x 175 coaster brake (with groove) galvanized
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Total length: 175 mm · Thread type: MF10.5x1 (fine pitch thread) · Ø shaft: 10.5 mm · Shank length: 95.6 mm · Thread length: 34 mm · Thread length: 45 mm
EUR 36.70
swiing® revival brake anchor plate HR 905 rear coaster hub | Puch Maxi S, X30 NS / NL
Surface: galvanized (blue) · Manufacturer: swiing® revival parts · Ø axle: 10.6 mm · Material: Steel · Ø External brake pads: 90 mm · Ø outside: 91.9 mm · Total length: 193 mm · Ø shaft: 10 mm · Ø bore: 10 mm · Cranking (offset): 13 mm · Puch OEM number: 349.541.507.0
EUR 159.20
Explore categories from Back pedal parts
Moped fans also bought
swiing® revival wheel bearing 25/37/6.3 coaster wheel
Bearing type: Ball ring · Stock number: K042 · Inner ring width: 25 mm · Ball bearing closed: No · Manufacturer: swiing® revival parts · Bearing cage: Sheet steel cage ball-guided · Ø ball: 6.34 mm · Groove ring: No · Area of application: Standard · Material: Steel · Width: 6.8 mm · Ø inside: 25 mm · Ø outside: 36 mm
EUR 9.70
swiing® revival ball bearing 25.5/6.3 coaster brake driver
Ball bearing closed: No · Manufacturer: swiing® revival parts · Bearing clearance: CN (standard) · Bearing cage: Sheet steel cage ball-guided · Groove ring: No · Material: Steel · Ø ball: 6.34 mm · Bearing type: Ball ring · Ø outside: 25.5 mm · Puch OEM number: 900.6909 · Sachs OEM no.: F 4762
EUR 8.45
Not in stock
swiing® revival wheel axle M10.5x1 x 175 coaster brake (with groove) galvanized
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Total length: 175 mm · Thread type: MF10.5x1 (fine pitch thread) · Ø shaft: 10.5 mm · Shank length: 95.6 mm · Thread length: 34 mm · Thread length: 45 mm
EUR 36.70
Working late? Evening hours on Thursday until 20:00
