Stylish racing exhaust with attached muffler suitable for various Puch mopeds / mopeds.
The raw steel exhaust is sealed with heat-resistant clear lacquer. This gives your racing moped an even more radical look. In addition, the tuning muffler also delivers the performance that it promises with its appearance.
The rearmost end of the resonance body is fitted with a screw. Two additional screws with different holes are included in the scope of delivery. Replacing the screws changes the exhaust back pressure and thus the performance of the silencer. This gives you an exhaust for the lower, middle and upper speed range in one!
Ø Flame tube: 28 mm
Ø Flame tube inside: 25 mm
Hole spacing: 43 mm
Fixing hole: 6.2 mm
Total length: 900 mm
Alternative racing tailpipes and the required mounting material can be found under accessories.
Branded product from the Portuguese manufacturer TECNO.
| Ø outside | 90 mm |
| Total length | 900 mm |
| Manufacturer | TECNO |
| Material | Steel |
| Surface | varnished |
| Color | gray |
| Ø Silencer | 60 mm |
| Ø Internal connection | 25 mm |
| Ø Flame tube outside | 28 mm |
| Mounting type | Welded lug |
| Number of fixing points | 2 pcs |
| Exhaust type | Cone / double cone |
| Flame tube attachment | Stud bolts & nuts |
| Puch | E50 Z50 (X30 Sport) |
Accessories & related products
Hot 
swiing® ingenious 28 mm Graphite Exhaust Gasket | Puch, Tomos
Place of use: Exhaust · Ø inside: 27.4 mm · Manufacturer: swiing® ingenious parts · Material: Graphite / Graphite · Reinforced: No · Ø outlet inside: 28 mm · Thickness: 3 mm · Ø screw holder: 6.6 mm · Area of application: Tuning · Hole spacing outlet: 42.5 mm
EUR 9.10
Hot
HOMOET "P6" Exhaust, 28 mm, Polished | Puch Maxi, X30
Manufacturer: HOMOET · Material: Steel · Surface: raw · Surface: varnished · Color: gray · Mounting type: Tab · Ø Silencer: 50 mm · Flame tube attachment: Stud bolts & nuts · Number of fixing points: 2 pcs · Ø outside: 88 mm · Total length: 900 mm · Ø Flame tube outside: 28 mm · Exhaust type: Cone / double cone
EUR 355.30
Not in stock
Explore categories from Exhaust system
Moped fans also bought
Hot
GPO mushroom air filter grille, Bing SRE (Ø=20 mm)
Ø outside: 61 mm · Manufacturer: GPO · Material: Metal · Camouflaged: No · Material: Rubber · Color: Chrome · Color: black · Filter type: Grille · Total length: 113 mm · Length rubber part: 63.5 mm · Mounting type: Bride · Mounting type: Plug connection clamped · Length of filter section: 49 mm · Area of application: Tuning · Ø Internal connection: 20 mm
EUR 15.80
BING O-ring Bing SRE & 85, Ø 20 mm
Place of use: Carburetor · Ø inside: 17.2 mm · Cord thickness: 1.4 mm · Ø outside: 20 mm · Manufacturer: BING · Number of components: 1 pcs · Material: Rubber · Surface: raw · Color: black · Area of application: Standard · Pony OEM number: A4281 · Sachs OEM no.: 0250 160 101
EUR 3.55
swiing® revival nozzle set M4 (50 - 60) Bing 18, Bing 85
Manufacturer: swiing® revival parts · Material: Brass · Component group Carburetor: Spraying · Quantity: 11 pcs · Carburetor type: 17 Catalyst · Carburetor type: 18 Catalyst · Carburetor type: 85 · Nozzle type: Main nozzle · Drive: Slot · Nozzle size: 50 · Nozzle size: 51 · Nozzle size: 52 · Nozzle size: 53 · Nozzle size: 54 · Nozzle size: 55 · Nozzle size: 56 · Nozzle size: 57 · Nozzle size: 58 · Nozzle size: 59 · Nozzle size: 60 · Nozzle thread: M4x0.7 (standard thread)
EUR 26.90
Hot
swiing® ingenious 28 mm Graphite Exhaust Gasket | Puch, Tomos
Place of use: Exhaust · Ø inside: 27.4 mm · Manufacturer: swiing® ingenious parts · Material: Graphite / Graphite · Reinforced: No · Ø outlet inside: 28 mm · Thickness: 3 mm · Ø screw holder: 6.6 mm · Area of application: Tuning · Hole spacing outlet: 42.5 mm
EUR 9.10
Working late? Evening hours on Thursday until 20:00
