Chrome-plated racing exhaust with attached silencer suitable for various Puch mopeds / mopeds with a straight outlet.
This tuning exhaust delivers plenty of power and is also visually stunning.
The rearmost end of the resonance body is fitted with a screw. Two additional screws with different holes are included in the scope of delivery.
These can be replaced. This changes the exhaust back pressure and therefore the performance of the silencer.
This gives you an exhaust for the lower, middle and upper speed range all in one.
You can find more racing pipes in the accessories section.
Branded product from the Portuguese manufacturer TECNO.
| Manufacturer | TECNO |
| Material | Steel, Aluminum |
| Surface | chrome-plated |
| Ø Silencer | 60 mm |
| Ø Internal connection | 24 mm |
| Color | Chrome |
| Total length | 900 mm |
| Ø Flame tube outside | 28 mm |
| Number of fixing points | 3 pcs |
| Exhaust type | Cone / double cone |
| Puch |
Accessories & related products
Hot 
swiing® ingenious gasket outlet 28 mm graphite
Manufacturer: swiing® ingenious parts · Material: Graphite / Graphite · Place of use: Exhaust · Reinforced: No · Thickness: 3 mm · Ø outlet inside: 28 mm · Ø inside: 27.4 mm · Ø screw holder: 6.6 mm · Hole spacing outlet: 42.5 mm · Area of application: Tuning
EUR 9.10
Hot
HOMOET exhaust P6 blank | Puch
Material: Steel · Color: gray · Total length: 900 mm · Manufacturer: HOMOET · Ø outside: 88 mm · Number of fixing points: 2 pcs · Surface: raw · Surface: varnished · Ø Silencer: 50 mm · Ø Flame tube outside: 28 mm · Exhaust type: Cone / double cone · Mounting type: Tab · Flame tube attachment: Stud bolts & nuts
EUR 349.20
Explore categories from Exhaust system
Moped fans also bought
Hot
swiing® ingenious pull starter Bosch / Ducati | Puch E50
Manufacturer: swiing® ingenious parts · Material: Plastic · Material: Steel · Surface: chrome-plated · Color: Chrome · Color: black-matt · Ignition system: BOSCH · Ignition system: DUCATI · Width: 150 mm · Height: 88 mm · Ø outside: 130 mm · Total length: 160 mm · Hole spacing: 137.5 mm · Number of fixing points: 2 pcs
EUR 183.70
Not in stock
Not so nice 
Road Master 2.25 x 17" F-323 4.P.R. Allround
Inventory-managed: No · Manufacturer: Road Master · Tire width: 2.25 " · Width: 2 1/4 " · Color: black · Wheel size: 17 " · Old designation: 21 x 2.25 " · Speed index: B = 50 km/h · Load capacity index: 39 = 136 kg · Profile type: F-323 4 P.R. · Tire type: Allround · White wall: No · Tubeless (yes/no): Tubetype TT (requires hose)
EUR 39.80
swiing® revival brake support bolt short Inox | Puch Maxi, Supermaxi
Material: Chrome steel (colloquially known as stainless steel) · Total length: 32 mm · Manufacturer: swiing® revival parts · Thread length: 13 mm · Number of components: 3 pcs · Shank length: 9.5 mm · Ø shaft: 9.8 mm · Ø External head: 14 mm · Thread type: MF10x1 (fine pitch thread) · Drive: Outer edge · Shank: Yes · Nominal diameter (thread): 10 mm · Area of application: Standard · Width across flats: 13 mm · Width across flats: 17 mm
EUR 15.80
Hot
Jammer racing clutch special 65 ccm and more | Puch E50
Material: Steel · Thickness: 19 mm · Manufacturer: Jammer · Ø outside: 92.5 mm · Material addition: Steel · Number of springs: 3 pcs · Number of jaws: 3 pcs · Recording type: Cone mounting · Area of application: High End · Area of application: MX · Area of application: Racing · Area of application: Tuning
EUR 232.80
Not in stock
Hot
swiing® ingenious 15 mm carburetor camouflaged | Puch
Nominal diameter: 15 mm · Manufacturer: swiing® ingenious parts · Material: Aluminum · Component group Carburetor: Carburetor complete · Carburetor type: SRE · Width: 50 mm · Height: 95 mm · Ø Internal connection: 20 mm · Ø Inside entrance: 15 mm · Total length: 66 mm · Mounting type: Plug connection clamped · Ø Output inside: 15 mm · Area of application: Tuning · Ø Air filter connection: 20 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.17 · Camouflaged: Yes · Nozzle size: 62 · Clamping screw torque (max.): 4 N/m · Puch OEM number: 349.1.15.100.0 · Puch OEM number: 349.2.15.800.0 · Puch OEM number: 349.4.15.500.0 · Puch OEM number: 349.4.15.000.0 · Puch OEM number: 349.4.15.300.0 · Puch OEM number: 349.6.15.400.0 · Puch OEM number: 349.7.15.700.0 · Puch OEM number: 349.8.15.400.0 · Puch OEM number: 349.9.15.300.0
EUR 97.90
Hot
swiing® revival 12 mm carburetor "original" | Puch
Nominal diameter: 12 mm · Manufacturer: swiing® revival parts · Material: Aluminum · Component group Carburetor: Carburetor complete · Color: gray · Carburetor type: SRE · Width: 50 mm · Height: 108 mm · Ø Internal connection: 20 mm · Ø Inside entrance: 12 mm · Total length: 65 mm · Mounting type: Plug connection clamped · Ø Output inside: 12 mm · Area of application: Standard · Ø Air filter connection: 20 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.15 · Camouflaged: No · Nozzle size: 52 · Clamping screw torque (max.): 4 N/m · Puch OEM number: 349.6.15.400.0 · Puch OEM number: 349.7.15.700.0
EUR 85.70
Attention: new opening hours from 16.02.2026 & new evening sale on Thursday 17:30-20:00
