Black, adjustable dampers for your moped, moped and small motorcycle.
The hardness or the preload of the dampers can be adjusted by the special spring mount.
Length (mount - mount): 260 mm
Outer diameter of coil spring: 44 mm
Holt diameter: 28 mm
Wall diameter for mounting: 10 mm
The rear springs should always be secured with large washers to prevent the plastic bushes from shifting if lateral forces occur.
The scope of delivery corresponds to one pair.
Rear springs from other manufacturers, the matching adjustment key as well as the washers and fastening material can be found in the accessories section.
Branded product from the manufacturer Xtreme.
Surface | varnished |
Color | black |
Manufacturer | Xtreme |
Ø outside | 44 mm |
Mounting type | Nuts & bolts |
Number of fixing points | 2 pcs |
Hole spacing | 260 mm |
Damping type | Spring |
Adjustable | Yes |
Ø Fastening inside | 10 mm |
Ø spars | 28 mm |
Accessories & related products
Loctite 243 medium-strength threadlocker 10 ml
Temperature resistance (min.): -75 - 200 °C · Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Contents [ml]: 10 ml · Color: blue · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Area of application: Chemistry · Adhesion: medium strength · Type of application: 1K · Gap dimension (max.): 0.01 mm · Alignment time: 600 sec · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
EUR 26.70
EUR 2’670.00/l
MKX shock absorber 26 cm chrome
Manufacturer: MKX · Surface: chrome-plated · Color: Chrome · Damping type: Spring · Adjustable: Yes · Ø outside: 46 mm · Ø Fastening inside: 8 mm · Ø Fastening inside: 10 mm · Ø spars: 24 mm · Mounting type: Nuts & bolts · Hole spacing: 260 mm · Number of fixing points: 2 pcs
EUR 60.90
Moped fans also bought
Magura cable clamp Ø 8 x 15 mm
Ø Cable bushing: 2.3 mm · Manufacturer: Magura · Thread length: 7 mm · Material: Brass · Material: Steel · Surface: galvanized (blue) · Surface: nickel-plated · Thread type: M6x1 (standard thread) · Drive: External hexagon · Drive: Slot · Ø Bundle: 6 mm · Screw head: Hexagon · Ø outside: 8 mm · Total length: 15 mm · Area of application: Standard · Width across flats SW: 7 mm
EUR 3.05
Spotlight round Ø 13 cm chrome / black
Material: Sheet metal (steel) · Test mark: none · Bulb holder: BA15d · Housing material: Metal · Surface: chrome-plated · Surface: varnished · Color: Chrome · Color: black · Color: transparent · Lens material: Plastic · Mounting type: Screws · Ø outside: 130 mm · Speedometer recording: None · Height: 147 mm · Thread size: M6 · Switch included: No · Battery operated: No · Number of fixing points: 2 pcs · Width: 134 mm · Depth: 80 mm · Area of application: Standard
EUR 30.40
Not in stock
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Possible lever positions: open / closed / reserve · Material lever: Metal · Filter type: Plastic net · Thread type: MF12x1 (fine pitch thread) · Ø fuel hose connection: 6 mm · Installation direction: horizontal / horizontal · Outlet direction: below · Mounting type: Union nut · Spare tube shape: curved · Reserve level: 70 mm
EUR 12.10
swiing® revival side protection screw set black | Puch Maxi S
Manufacturer: swiing® revival parts · Material: Plastic · Material: Steel · Thread type: M5x0.8 (standard thread) · Surface: galvanized (blue) · Surface: raw · Color: silver · Total length: 47 mm · Total length: 60 mm · Thread length: 35 mm · Thread length: 50 mm · Drive: Slot · Drive: Triangular head
EUR 15.80