Hot 
Adjustable premium gas pressure shock absorbers in black with adjustable coil spring for your moped, moped and small motorcycle.
The high-end dampers are mainly used in the cross sector and impress with their optimum adjustability. The response behavior can be easily adjusted with just a few clicks. The height or preload of the springs can be infinitely adjusted by up to 60 mm using a thread. The rear springs should always be secured with large washers to prevent the bearing bushes from shifting when lateral forces occur.
Length (mount – mount): 330 mm
Ø outer spiral spring: 61 mm
Ø expansion joint: 52 mm
Ø bushings for fastening: 10 mm
Color: black / red
The scope of delivery corresponds to one pair.
Simpler rear springs as well as the washers and fastening material can be found under accessories.
Quality product from the manufacturer YSS.
| Manufacturer | YSS |
| Hole spacing | 330 mm |
| Material | Aluminum, Steel, Chrome steel (colloquially known as stainless steel) |
| Surface | anodized |
| Color | black, red |
| Damping type | Pneumatic (air) |
| Adjustable | Yes |
| Ø outside | 61 mm |
| Number of fixing points | 2 pcs |
| Mounting type | Nuts & bolts |
| Ø Fastening inside | 10 mm |
| Total length | 370 mm, 340 mm |
Accessories & related products
Loctite 243 medium-strength threadlocker 10 ml
Color: blue · Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Contents: 10 ml · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Temperature resistance (min.): -75 - 200 °C · Gap dimension (max.): 0.01 mm · Type of application: 1K · Alignment time: 600 sec · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m · Area of application: Chemistry
EUR 26.90
EUR 2’690.00/l
YSS shock absorber Racing 35 cm (oil pressure)
Color: black · Total length: 380 mm · Manufacturer: YSS · Number of fixing points: 2 pcs · Hole spacing: 350 mm · Material: Steel · Surface: varnished · Damping type: Hydraulic (oil) · Adjustable: Yes · Mounting type: Nuts & bolts · Ø Fastening inside: 10 mm
EUR 159.20
swiing® revival screw set shock absorber mounting with axle galvanized | Puch Maxi S
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Nominal diameter (thread): 8 mm · Drive: External hexagon · Screw head: Hexagon · Thread type: M8x1.25 (standard thread) · Number of components: 17 pcs
EUR 14.60
swiing® revival screws & axle set shock absorber | Puch Maxi S
Manufacturer: swiing® revival parts · Material: Chrome steel (colloquially known as stainless steel) · Material: Steel · Nominal diameter (thread): 8 mm · Drive: External hexagon · Screw head: Hexagon · Thread type: M8x1.25 (standard thread) · Number of components: 17 pcs
EUR 21.90
Shock absorber 34 cm fancy neon yellow
Hole spacing: 340 mm · Color: black · Color: neon yellow · Surface: varnished · Damping type: Spring · Adjustable: Yes · Ø outside: 50 mm · Number of fixing points: 2 pcs · Ø spars: 30 mm · Mounting type: Nuts & bolts · Ø Fastening inside: 10 mm · Total length: 375 mm
EUR 97.90
MKX shock absorber 34 cm black
Manufacturer: MKX · Hole spacing: 340 mm · Color: black · Surface: varnished · Damping type: Spring · Adjustable: Yes · Ø outside: 46 mm · Number of fixing points: 2 pcs · Ø spars: 24 mm · Mounting type: Nuts & bolts · Ø Fastening inside: 8 mm · Ø Fastening inside: 10 mm · Total length: 375 mm
EUR 61.20
Explore categories from Shock absorber & swingarm
Moped fans also bought
Side stand black | Puch Maxi S / N, Supermaxi LG1 / LG2, X30 NS / NL / NG-2AH, P1
Material: Steel · Color: black · Total length: 340 mm · Manufacturer: Made in Portugal · Number of fixing points: 2 pcs · Surface: powder-coated · Adjustable: Yes · Length pivot point - floor: 220 mm · Mounting type: Screwed clamp
EUR 24.40
GPO 17" spoke set incl. nipple (2.9 x 188 mm) Inox
Color: silver · Nipple length: 14 mm · Manufacturer: GPO · Material: Chrome steel (colloquially known as stainless steel) · Surface: raw · Quantity: 36 pcs · Nominal diameter (thread): 3.15 mm · Length from hook: 188 mm · Ø spoke: 2.9 mm · Ø spoke head: 5.35 mm · Ø nipple head: 7.9 mm · Ø Nipple neck: 5 mm · Hook length: 9 mm · Thread length: 11 mm · Hook angle: 95 °
EUR 67.30
GPO clutch plates (2 pcs.) | Sachs 50/2, 503 2AL/2BL (A3887)
Thickness: 3.3 mm · Manufacturer: GPO · Ø outside: 93 mm · Material: Composite materials · Material: Steel · Recording type: Interlocking · Ø inside: 29.6 mm · Ø inside: 35.6 mm · Number of slats: 2 pcs · Area of application: Standard · Pony OEM number: A3887 · Sachs OEM no.: 0659 010 006
EUR 20.70
Hot
swiing® revival ball bearing countershaft | Sachs 50/2, 50/3, 50/4, 503 2AL/2BL (A2531)
Bearing type: Deep groove ball bearing · Stock number: E15 · Bearing cage: Sheet steel cage ball-guided · Inner ring width: 25.6 mm · Manufacturer: swiing® revival parts · Bearing clearance: CN (standard) · Material: Steel · Ø inside: 15 mm · Ø outside: 35 mm · Thread type: MF20.8x1 LH (fine/left-hand thread) · Width: 8 mm · Area of application: High End · Area of application: Standard · Pony OEM number: A2531 · Sachs OEM no.: 0286 079 105
EUR 61.20
Brake line 0.9 - 1.9 m (selection) black 28 / 90° incl. banjo bolts
Material: Rubber · Material: Steel · Color: black · Thread type: MF10x1.25 (fine pitch thread) · Mounting type: Screws · Cable length: 900 mm · Cable length: 1000 mm · Cable length: 1150 mm · Cable length: 1400 mm · Cable length: 1600 mm · Cable length: 1700 mm · Cable length: 1900 mm
EUR 29.30
Working late? Evening hours on Thursday until 20:00
