Adjusting nozzle for the 9 mm carburetor of your Solex moped, moped or bicycle with auxiliary engine.
This so-called main jet can be used for any original Solex, for small engine modifications through to tuning units.
This multi-part nozzle with M6x1 thread is made of stainless steel and can be fitted to the carburetor without modification.
The adjusting screw allows you to continuously adjust the throttle sizes from 28 to 32 on the knurled knob in order to find the optimum running of the engine.
The internal O-ring prevents the adjusting screw from twisting and is made of petrol-resistant rubber. A second spare O-ring with a slightly larger diameter is included in the scope of delivery.
Note: Care should be taken during installation as it is more hollow and fragile than a conventional nozzle. It must be screwed on by hand and then lightly tightened with a wrench (just under 5°).
You can find more motor components in the accessories section.
| Component group Carburetor | Spraying |
| Material | Chrome steel (colloquially known as stainless steel) |
| Quantity | 1 pcs |
| Nozzle size | 28, 32 |
| Nozzle type | Main nozzle |
| Width across flats | 12 mm |
| Total length | 31 mm |
| Drive | External hexagon, Knurled screw |
| Nozzle thread | M6x1 (standard thread) |
| Solex |
Ratings
Accessories & related products
Carburetor 9 mm camouflaged | Solex 3300, 3800, 5000
Nominal diameter: 9 mm · Manufacturer: Made in France · Material: Aluminum · Component group Carburetor: Carburetor complete · Carburetor type: Gurtner DG · Total length: 133 mm · Mounting type: Screws · Color: silver · Width: 80 mm · Ø fuel hose connection: 10.6 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M6x1 (standard thread) · Camouflaged: Yes · Nozzle size: 32 · Area of application: Tuning
EUR 197.30
Moped fans also bought
Magura adjusting screw brake long
Manufacturer: Magura · Material: Brass · Surface: nickel-plated · Thread type: MF6x0.75 (fine pitch thread) · Color: silver · Ø shaft: 6 mm · Ø External head: 9.1 mm · Total length: 47 mm · Total length: 65 mm · Thread length: 24 mm · Drive: Knurled screw · Shank length: 11 mm
EUR 4.80
Fortune / Merrick 2.00-2.50 x 16" / 17" inner tube
Manufacturer: Fortune · Tire width: 2 - 2.5 " · Tire width: 2.25 - 2.5 " · Tire width: 2.5 " · Tire width [mm]: 50.8 - 63.5 · Width: 2 " · Width: 2 1/4 " · Width: 2 1/2 " · Wheel size: 16 - 17 " · Wheel size: 17 " · Tire height [%]: 100 · Old designation: 20 x 2 " · Old designation: 20 x 2.25 " · Old designation: 20 x 2.5 " · Old designation: 21 x 2 " · Old designation: 21 x 2.25 " · Old designation: 21 x 2.5 " · Valve type: TR4 Auto valve
EUR 12.20
Collection only possible with online purchase and appointment.
