Reproduction of the original Puch E50 gearbox, consisting of a clutch basket and a spur gear suitable for your Puch Maxi and Supermaxi P1 moped / moped with E50 and E50A engine.
The original clutch and starter clutch can be used with this basket.
Normal gear ratio of 19:96 teeth with helical toothing.
The helical-toothed gears run more smoothly than straight-toothed gears.
Clutch basket:
- Welded press fit, no spinning possible, even under higher loads
- Special sliding bush is already press-fitted
Spur gear:
- Spur gear made from cast material
- Slightly more solid design than original
Notes: Clutch basket and spur gear should always be used together. There may be a slight "singing" when the clutch basket is used with the original spur gear. This gearbox is suitable for the 3-bearing and 4-bearing housings. Depending on the tolerances, shims may have to be used so that the gear wheel does not rub against the housing. The clutch basket from MBR should not be used together with this spur gear.
High-quality alternatives can be found in the accessories section.
Original Puch spare part number: 344.1.13.350.0
| Material | Steel |
| Area of application | Standard |
| Toothing type | helical toothed |
| Recording type | Interlocking |
| Number of teeth | 19 pcs, 96 pcs |
| Puch | E50 |
Ratings
Accessories & related products
Explore categories from Gearbox & housing (motor)
Moped fans also bought
GPO clutch 3-jaw aluminum | Puch E50
Manufacturer: GPO · Material: Aluminum · Material: Steel · Material addition: Composite materials · Ø outside: 93 mm · Number of jaws: 3 pcs · Thickness: 20.9 mm · Recording type: Cone mounting · Number of springs: 3 pcs · Ø inside: 12 mm · Ø inside: 14.6 mm · Area of application: Original · Area of application: Standard
EUR 61.20
GPO gasket set | Puch E50
Manufacturer: GPO · Material: Aluminum · Material: Fiber · Material: Sealing carton · Material: Sealing paper · Hole spacing inlet: 32 - 38 mm · Ø outlet inside: 19.9 mm · Hole spacing outlet: 42 mm · Number of components: 7 pcs · Decompressor: Yes · Hole pattern [mm]: 44 x 44 · Area of application: Standard
EUR 12.10
BOSCH screw-in condenser | Bosch / Ducati
Manufacturer: BOSCH · Capacity: 0.2 µF · Mounting type: Plug connection clamped · Connection type: Thread for screwing · Height: 27 mm · Area of application: Original · Area of application: Standard · Ø outside: 18 mm · Thread type: M3x0.5 (standard thread) · Total height: 33.5 mm · Alternative version of the Pony OEM number: A2090 · Pony OEM number: A2092 · Alternative version of the Sachs OEM number: 0265 052 003 · Sachs OEM no.: 0265 052 007 · BOSCH OEM number: 2 207 330 050
EUR 24.40
Hot 
BOSCH breaker with cable | Bosch / Ducati
Manufacturer: BOSCH · Ø axle: 4 mm · Material: Steel · Ø Internal flywheel: 90 mm · Cable length: 100 mm · Cable available: Yes · Number of fixing points: 1 pcs · Area of application: Original · Area of application: Standard · Ø mounting hole: 4.5 mm · Alternative version of the Pony OEM number: A4606 · Alternative version of the Pony OEM number: A4606A · Pony OEM number: A4607 · Sachs OEM no.: 0283 116 102 · Alternative version of the Sachs OEM number: 0983 106 000 · Alternative version of the Sachs OEM number: 2783 039 001 · BERU OEM number: 0 340 100 710 · BOSCH OEM number: 1 217 013 025
EUR 24.40
GPO front mudguard strut 17" chrome
Manufacturer: GPO · Material: Steel · Outer width: 160 mm · Surface: chrome-plated · Color: Chrome · Wheel size: 17 " · Distance mudguard - center hole: 300 mm · Total length: 305 mm · Mounting type: Nuts & bolts · Ø mounting hole: 12.5 mm · Number of fixing points: 4 pcs
EUR 18.30
Hot
DUCATI ignition coil (1A quality)
Manufacturer: DUCATI · Place of use: Internal (in the ignition) · Ø Internal flywheel: 90 mm · Ø cable holder: 5.9 mm · Cable length: 37 mm · Color: black · Total length: 76.5 mm · Height: 17 mm · Mounting type: Screws · Number of fixing points: 2 pcs · Ø mounting hole: 4.6 mm · Hole spacing: 54 mm · Area of application: Original · Area of application: Standard · Alternative version of the Pony OEM number: A2116 · Alternative version of the Pony OEM number: A2118 · Pony OEM number: A2114 · Pony OEM number: A5524 · Alternative version of the Sachs OEM number: 0265 142 002 · Alternative version of the Sachs OEM number: 0265 142 004 · Sachs OEM no.: 0265 132 100 · Sachs OEM no.: 0265 203 001
EUR 79.60
swiing® ingenious crankshaft "High End" | Tomos Classic, Quadro, Sprint, Fun Sport'R
Manufacturer: swiing® ingenious parts · Cheek type: Full cheeks · Connecting rod length center-center: 90 mm · Total length of crankpin on clutch side: 93 mm · Total length crankpin ignition side: 64 mm · Ø crank webs: 70 mm · Ø piston pin (B): 12 mm · Thread type: MF10x1 (fine pitch thread) · Wide crank webs: 34 mm · Area of application: Racing · Tomos OEM number: 223421
EUR 165.40
Not in stock
Attention: new opening hours from 16.02.2026 & new evening sale on Thursday 17:30-20:00
