Disc brake system suitable for the rear 5-star cast rim of your Puch moped / moped.
The brake disk mount is compatible with both original Grimeca rims and their replicas. For installation, the rear wheel rim is placed between the adapter piece for the brake disk and the wheel hub and clamped using the enclosed screws in a sandwich principle.
The disc brake system is supplied ready for installation with the following components:
| Ø outside | 185 mm |
| Cable length | 1750 mm |
| Ø Handlebars | 22 mm |
| Puch |
Ratings
Accessories & related products
Loctite 243 medium-strength threadlocker 10 ml
Temperature resistance (min.): -75 - 200 °C · Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Contents: 10 ml · Color: blue · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Area of application: Chemistry · Adhesion: medium strength · Type of application: 1K · Gap dimension (max.): 0.01 mm · Alignment time: 600 sec · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
EUR 27.00
EUR 2’700.00/l
Moped fans also bought
Magura cable clamp Ø 8 x 15 mm
Manufacturer: Magura · Material: Brass · Material: Steel · Surface: galvanized (blue) · Surface: nickel-plated · Ø outside: 8 mm · Total length: 15 mm · Ø Cable bushing: 2.3 mm · Drive: External hexagon · Drive: Slot · Screw head: Hexagon · Ø Bundle: 6 mm · Thread type: M6x1 (standard thread) · Width across flats: 7 mm · Thread length: 7 mm · Area of application: Standard
EUR 3.10
swiing® ingenious clutch springs reinforced (+20%) | Puch E50
Spring design: Pressure spring · Ø wire: 1.7 mm · Manufacturer: swiing® ingenious parts · Material: Spring steel · Surface: coated · Ø inside: 4.8 mm · Total length: 28 mm · Ø outside: 8.3 mm · Area of application: Tuning · Color: blue · Number of components: 3 pcs
EUR 22.10
swiing® revival oil filler plug with sealing ring | Puch E50
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Total length: 14.6 mm · Drive: Slot · Screw head: Lens head · Ø External head: 14 mm · Number of components: 2 pcs · Thread type: M10x1.5 (standard thread) · Thread length: 6 mm · Puch OEM number: 364.1.10.660.1
EUR 4.35
GPO sprocket 35 - 57 teeth black | Puch Maxi S, N / X30 NG-2AH
Material: Steel · Surface: varnished · Chain pitch: 1/2" x 3/16" · Chain type: 415H · Manufacturer: GPO · Color: black · Number of teeth: 35 pcs · Number of teeth: 36 pcs · Number of teeth: 37 pcs · Number of teeth: 38 pcs · Number of teeth: 39 pcs · Number of teeth: 40 pcs · Number of teeth: 41 pcs · Number of teeth: 42 pcs · Number of teeth: 43 pcs · Number of teeth: 44 pcs · Number of teeth: 45 pcs · Number of teeth: 46 pcs · Number of teeth: 47 pcs · Number of teeth: 48 pcs · Number of teeth: 49 pcs · Number of teeth: 50 pcs · Number of teeth: 51 pcs · Number of teeth: 52 pcs · Number of teeth: 53 pcs · Number of teeth: 54 pcs · Number of teeth: 55 pcs · Number of teeth: 56 pcs · Number of teeth: 57 pcs · Ø bolt circle: 106 mm · Ø inside: 94 mm · Ø mounting hole: 6.7 mm · Cranking (offset): 8 mm
EUR 24.60
Collection only possible with online purchase and appointment.
