Chrome-plated 28 mm cigar exhaust with 70 mm outer diameter, which can be fitted to your Puch Maxi S/N, Puch X30 Sport NS/NL and Puch X30 NG-2A moped after a small adjustment.
Flame pipe and silencer are separate and are supplied without clamp as shown.
Notes: A 70 mm clamp (item no. 11543 or 18313) must be used to fit the Puch Maxi N.
For Puch X30 NG-2A, the spanner must be bent slightly so that it does not protrude from the rear case.
The M6 screw at the end of the pot must be checked and locked with an additional nut, otherwise the nut may loosen and the silencer insert may fall out.
A quality product made in Portugal.
| Manufacturer | Made in Portugal |
| Material | Steel |
| Surface | chrome-plated |
| Ø outside | 70 mm |
| Total length | 920 mm |
| Ø Internal connection | 28 mm |
| Ø Flame tube outside | 28 mm |
| Exhaust type | Cigar |
| Number of fixing points | 1 pcs |
| Color | Chrome |
| Mounting type | Welded lug, Stud bolts & nuts |
| Flame tube attachment | Flange |
| Puch | E50 Z50 (X30 Sport) |
Ratings
Accessories & related products
swiing® ingenious exhaust clamp 28 mm heat-resistant
Material: FPM / FKM (colloquially known as Viton) · Material: Steel · Surface: chrome-plated · Manufacturer: swiing® ingenious parts · Total length: 40 mm · Ø inside: 25 - 28 mm · Width: 40 mm · Color: Chrome · Mounting type: Nuts & bolts
EUR 26.10
Explore categories from Exhaust system
Moped fans also bought
swiing® revival nozzle set M3.5 (64 - 74) Bing SRE, SRA, SRC, SRF
Material: Brass · Manufacturer: swiing® revival parts · Component group Carburetor: Spraying · Quantity: 6 pcs · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Total length: 6 mm · Nozzle type: Main nozzle · Drive: Slot · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle size: 64 · Nozzle size: 66 · Nozzle size: 68 · Nozzle size: 70 · Nozzle size: 72 · Nozzle size: 74
EUR 18.90
GPO 44 mm cylinder head | Puch Maxi S, N / X30 NS, NL, N-2AH
Material: Aluminum · Manufacturer: GPO · Surface: sandblasted · Camouflaged: Yes · Area of application: Tuning · Ø cylinder: 44 mm · Total length: 135 mm · Candle thread: short · Width: 125 mm · Height: 55 mm · Number of fixing points: 4 pcs · Hole pattern [mm]: 44 x 44 · Decompressor: No
EUR 51.10
Hot 
swiing® ingenious 15 mm carburetor camouflaged | Puch
Material: Aluminum · Manufacturer: swiing® ingenious parts · Camouflaged: Yes · Component group Carburetor: Carburetor complete · Area of application: Tuning · Carburetor type: SRE · Total length: 66 mm · Nominal diameter: 15 mm · Nozzle thread: M3.5x0.6 (standard thread) · Ø fuel hose connection: 6 mm · Nozzle size: 62 · Ø Inside entrance: 15 mm · Ø Internal connection: 20 mm · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Width: 50 mm · Height: 95 mm · Mixed oil connection: No · Mounting type: Plug connection clamped · Vacuum connection: No · Choke control: Hand choke · Nozzle block: 2.17 · Clamping screw torque (max.): 4 N/m · Puch OEM number: 349.1.15.100.0 · Puch OEM number: 349.2.15.800.0 · Puch OEM number: 349.4.15.500.0 · Puch OEM number: 349.4.15.000.0 · Puch OEM number: 349.4.15.300.0 · Puch OEM number: 349.6.15.400.0 · Puch OEM number: 349.7.15.700.0 · Puch OEM number: 349.8.15.400.0 · Puch OEM number: 349.9.15.300.0
EUR 95.20
Hot
swiing® ingenious 15 mm intake manifold camouflaged | Puch E50
Material: Aluminum · Manufacturer: swiing® ingenious parts · Total length: 46 mm · Camouflaged: Yes · Area of application: Tuning · Ø inside: 15 mm · Ø External connection: 20 mm · Hole spacing inlet: 38 mm · Total height: 53 mm · Number of fixing points: 2 pcs · Height flange center hole: 43 mm · Mounting type: Screws · Puch OEM number: 349.2.15.330.1 · Puch OEM number: 349.2.15.130.1
EUR 41.60
Collection only possible with online purchase and appointment.
