Transparent float chamber suitable for Bing SRE, SRC, SRF and the SRA 1/11/35 carburetor. This float chamber was installed on Puch Maxi, X30, Velux, Sachs and Zündapp Belmondo mopeds, among others.
The transparent material means you always have the fuel mixture in view and can immediately see the float level and whether deposits are forming in the chamber.
The float cover can be permanently fitted. When tightening, make sure that it is only tightened lightly by hand, as with the original cap.
Ø outer: 44 mm
Total height: 31 mm
Slot width (SW): 19 mm
You can find the original float cap and various revision products for your carburettor in the accessories section.
Details
| Material | Plastic |
| Component group Carburetor | Adjusting screws, float, etc. |
| Carburetor type | SRA (1/11/35) Velux, SRA (1/11/31) Velux, SRE, SRC, SRF |
| Ø outside | 44 mm |
| Number of fixing points | 1 pcs |
| Height | 31 mm |
| Width across flats SW | 19 mm |
Suitable for the following models
| Puch | |
| Sachs | 503 - AAL, ABL, 2AL / 2BL, AB, AC 504 (without pedal shaft) 505 (with pedal shaft) - 1A (AT), 2A (HG) 508 - 1 A |
| Zündapp Belmondo | |
| Zündapp | 247 Motor |
Accessories & related products
BING Float cap Bing Original SRE, SRC, SRF, SRA
Manufacturer: BING · Material: Aluminum · Component group Carburetor: Adjusting screws, float, etc. · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Ø outside: 43.5 mm · Height: 32.5 mm · Width across flats SW: 14 mm · Piaggio OEM number: A4587 · Sachs OEM no.: 0962 056 000
EUR 23.10
swiing® revival seal Float SRE, SRC, SRF, SRA
Manufacturer: swiing® revival parts · Material: Sealing paper · Component group Carburetor: Sealing, revising · Surface: blank · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Thickness: 1.5 mm · Ø inside: 41 mm · Ø outside: 45 mm · Pony OEM number: A4519 · Sachs OEM no.: 0950 128 000
EUR 3.45
BING 15 mm Bing original carburetor (1/15/46A)
Width: 50 mm · Manufacturer: BING · Material: Aluminum · Component group Carburetor: Carburetor complete · Area of application: Standard · Area of application: Tuning · Nominal diameter: 15 mm · Carburetor type: SRE · Choke control: Hand choke · Total length: 66 mm · Nozzle thread: M3.5x0.6 (standard thread) · Ø fuel hose connection: 5.3 mm · Ø fuel hose connection: 6 mm · Ø Inside entrance: 15 mm · Ø Internal connection: 20 mm · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Height: 95 mm · Mixed oil connection: No · Mounting type: Plug connection clamped · Vacuum connection: No · Nozzle block: 2.17 · Camouflaged: No · Nozzle size: 82 · Clamping screw torque (max.): 4 N/m
EUR 162.50
GPO gasket set carburetor Bing SRE
Manufacturer: GPO · Material: Sealing paper · Component group Carburetor: Sealing, revising · Carburetor type: SRE · Thickness: 0.5 mm · Thickness: 0.9 mm · Thickness: 1.5 mm · Ø inside: 7.8 mm · Ø inside: 41 mm · Ø outside: 12.2 mm · Ø outside: 45 mm · Camouflaged: No
EUR 6.00
BING Carburetor cover Bing SRE (original)
Manufacturer: BING · Material: Aluminum · Component group Carburetor: Adjusting screws, float, etc. · Thread type: MF6x0.75 (fine pitch thread) · Carburetor type: SRE · Pony OEM number: A4588 · Zündapp OEM number: 265-04.900 · Sachs OEM no.: 0962 058 005
EUR 19.50
BING revision set float Original Bing SRE, SRC, SRF, SRA
Ø outside: 36.5 mm · Manufacturer: BING · Component group Carburetor: Sealing, revising · Color: white · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Height: 18 mm · Pony OEM number: A5634 · Sachs OEM no.: 0281 125 002
EUR 36.60
Moped fans like you also bought:
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø Stranded wire: 1.25 mm · Cable length: 2200 mm · Nipple shape: Cylinder · Ø nipple: 3 mm · Number of components: 1 pcs · Nipple length: 5 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Area of application: Standard
EUR 3.45
swiing® revival seal Float SRE, SRC, SRF, SRA
Manufacturer: swiing® revival parts · Material: Sealing paper · Component group Carburetor: Sealing, revising · Surface: blank · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Thickness: 1.5 mm · Ø inside: 41 mm · Ø outside: 45 mm · Pony OEM number: A4519 · Sachs OEM no.: 0950 128 000
EUR 3.45
Motorex engine oil (gear oil) manual 450 ml
Temperature resistance (min.): -30 - 220 °C · Manufacturer: Motorex · Viscosity (SAE): 80W · Oil type: GL4 · Contents [ml]: 450 ml · Area of application: Gearbox lubrication with clutch · Gearbox type: Foot control · Gearbox type: Manual gearshift
EUR 12.10
EUR 26.89/l
BING rubber grommet Ø 8 mm carburetor pipe bend
Clamping diameter: 4 mm · Manufacturer: BING · Material: Rubber · Color: black · Total length: 29 mm · Ø inside: 8 mm · Ø outside: 12 mm · Alternative version of the Pony OEM number: A1930 · Pony OEM number: A1952 · Alternative version of the Sachs OEM number: 0260 024 001 · Sachs OEM no.: 0260 125 000
EUR 4.80
GPO gasket set carburetor Bing SRE
Manufacturer: GPO · Material: Sealing paper · Component group Carburetor: Sealing, revising · Carburetor type: SRE · Thickness: 0.5 mm · Thickness: 0.9 mm · Thickness: 1.5 mm · Ø inside: 7.8 mm · Ø inside: 41 mm · Ø outside: 12.2 mm · Ø outside: 45 mm · Camouflaged: No
EUR 6.00
BING revision set float Original Bing SRE, SRC, SRF, SRA
Ø outside: 36.5 mm · Manufacturer: BING · Component group Carburetor: Sealing, revising · Color: white · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Height: 18 mm · Pony OEM number: A5634 · Sachs OEM no.: 0281 125 002
EUR 36.60
Collection only possible with online purchase and appointment.
