profile
All wishlists Community wishlists
Carousel Image 1
Carousel Image 2
Carousel Image 3
Carousel Image 4
logo_gpo

Universal

27251

GPO 19.5 mm PHBG AS carburetor hand choke (Dell'Orto replica)

rating iconrating iconrating iconrating iconrating icon
No reviews
EUR 97.90

Incl. 25% VAT.

Description

19.5 mm PHBG replica racing carburetor for universal use for your moped, moped and small motorcycle.
This racing carburetor is suitable for tuning and is designed for racing bikes between 50 and 75 cc.

The tuning carburetor has a manually operated choke (starter slide / starter flap).
The fuel/air mixture can be perfectly adjusted using the main and auxiliary valves and the mixture adjustment screw.

The carburetor has an M32x1.25 thread on the air filter side. The air filter can be attached directly to the thread.

Main thread size (M5): 85 (with throttle plate)
Adjacent thread size (idle thread): 50
Choked thread size: 55
Air filter connection diameter: 32 mm (M32 x 1.25)
Connection diameter of intake manifold: 24 mm (or 26 mm after removing the reducer sleeve)
Total height: 130 mm
Total width: 75 mm

Matching nozzles, air filters and intake manifolds can be found in the accessories section.

Good, inexpensive standard spare part. GPO – GOOD PARTS ONLY.

Colorblack
ManufacturerGPO
CamouflagedNo
MaterialAluminum
Component group CarburetorCarburetor complete
Area of applicationTuning
Carburetor typePHBG AS
Total length71.5 mm
Width71 mm
Height123 mm
Nominal diameter19.5 mm
Nozzle threadM5x0.8 (standard thread)
Ø without reducing sleeve26 mm
Ø Internal connection24 mm
Ø Air filter connection32 mm
Air filter connection threadMF32x1.25 (fine pitch thread)
Ø fuel hose connection6 mm, 5.4 mm
Mixed oil connectionYes
Mounting typePlug connection clamped
Vacuum connectionYes
Choke controlHand choke
Choke nozzle size55
Nozzle block262AU
Nozzle size85
Size of secondary nozzle50

Accessories & related products

Dell'Orto gasket set carburetor PHBG
undefined

Universal

10493

Dell'Orto gasket set carburetor PHBG

Manufacturer: Dell'Orto · Component group Carburetor: Sealing, revising · Carburetor type: PHBG

EUR 14.60

GPO 18.5 mm intake manifold Dell'Orto PHBG | Puch E50
undefined

For: Puch

10659

GPO 18.5 mm intake manifold Dell'Orto PHBG | Puch E50

Manufacturer: GPO · Material: Aluminum · Camouflaged: No · Area of application: Tuning · Surface: polished · Ø inside: 18.8 mm · Total length: 40 mm · Color: Chrome · Ø External connection: 23.9 mm · Hole spacing inlet: 38 mm · Height flange center hole: 45 mm · Total height: 57 mm · Mounting type: Screws · Number of fixing points: 2 pcs

EUR 21.90

Gas cable Ø 1.2 mm x 165 cm (nipple ball) Dell'Orto
undefined

For: Universal · Puch · Sachs · Pony / Cilo (Beta 521 & 512) · Piaggio · Tomos · Cilo · Hercules

10703

Gas cable Ø 1.2 mm x 165 cm (nipple ball) Dell'Orto

Ø nipple: 3.5 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Ø Stranded wire: 1.2 mm · Nipple shape: Ball · Cable length: 1650 mm · Area of application: Standard · Number of components: 1 pcs

EUR 2.95

swiing® revival nozzle set M5 (70 - 92) Dell'Orto SHA, PHBG
undefined

For: Universal · Pony / Cilo (Beta 521 & 512) · Piaggio

10902

swiing® revival nozzle set M5 (70 - 92) Dell'Orto SHA, PHBG

Manufacturer: swiing® revival parts · Component group Carburetor: Spraying · Material: Brass · Quantity: 10 pcs · Carburetor type: PHBG · Carburetor type: SHA · Carburetor type: SHA (Piaggio) · Nozzle type: Main nozzle · Nozzle thread: M5x0.8 (standard thread) · Nozzle size: 70 · Nozzle size: 72 · Nozzle size: 75 · Nozzle size: 78 · Nozzle size: 80 · Nozzle size: 82 · Nozzle size: 85 · Nozzle size: 88 · Nozzle size: 90 · Nozzle size: 92 · Total length: 8 mm · Drive: Slot

EUR 25.60

Not in stock

Hot Hot
swiing® revival nozzle set M5 (50 - 70) Dell'Orto SHA, PHBG
undefined

For: Universal · Pony / Cilo (Beta 521 & 512) · Piaggio

12179

swiing® revival nozzle set M5 (50 - 70) Dell'Orto SHA, PHBG

Manufacturer: swiing® revival parts · Material: Brass · Component group Carburetor: Spraying · Quantity: 10 pcs · Carburetor type: PHBG · Carburetor type: SHA · Carburetor type: SHA (Piaggio) · Total length: 8 mm · Nozzle type: Main nozzle · Drive: Slot · Nozzle thread: M5x0.8 (standard thread) · Nozzle size: 50 · Nozzle size: 52 · Nozzle size: 55 · Nozzle size: 58 · Nozzle size: 60 · Nozzle size: 62 · Nozzle size: 64 · Nozzle size: 66 · Nozzle size: 68 · Nozzle size: 70

EUR 25.60

swiing® revival nozzle set M5 (80 - 100) Dell'Orto SHA, PHBG
undefined

For: Universal · Pony / Cilo (Beta 521 & 512) · Piaggio

17985

swiing® revival nozzle set M5 (80 - 100) Dell'Orto SHA, PHBG

Manufacturer: swiing® revival parts · Material: Brass · Component group Carburetor: Spraying · Quantity: 10 pcs · Carburetor type: PHBG · Carburetor type: SHA · Carburetor type: SHA (Piaggio) · Total length: 8 mm · Nozzle type: Main nozzle · Drive: Slot · Nozzle thread: M5x0.8 (standard thread) · Nozzle size: 80 · Nozzle size: 82 · Nozzle size: 85 · Nozzle size: 88 · Nozzle size: 90 · Nozzle size: 92 · Nozzle size: 94 · Nozzle size: 96 · Nozzle size: 98 · Nozzle size: 100

EUR 25.60

swiing® revival nozzle M5 (30 - 120 of your choice) Dell'Orto SHA, PHBG
undefined
angle-right

For: Universal · Pony / Cilo (Beta 521 & 512) · Piaggio · Tomos

22000

swiing® revival nozzle M5 (30 - 120 of your choice) Dell'Orto SHA, PHBG

Manufacturer: swiing® revival parts · Material: Brass · Component group Carburetor: Spraying · Carburetor type: PHBG · Carburetor type: SHA · Carburetor type: SHA (Piaggio) · Total length: 8 mm · Nozzle type: Main nozzle · Drive: Slot · Nozzle thread: M5x0.8 (standard thread) · Nozzle size: 30 · Nozzle size: 31 · Nozzle size: 32 · Nozzle size: 33 · Nozzle size: 34 · Nozzle size: 35 · Nozzle size: 36 · Nozzle size: 37 · Nozzle size: 38 · Nozzle size: 39 · Nozzle size: 40 · Nozzle size: 41 · Nozzle size: 42 · Nozzle size: 43 · Nozzle size: 44 · Nozzle size: 45 · Nozzle size: 46 · Nozzle size: 47 · Nozzle size: 48 · Nozzle size: 49 · Nozzle size: 50 · Nozzle size: 51 · Nozzle size: 52 · Nozzle size: 53 · Nozzle size: 54 · Nozzle size: 55 · Nozzle size: 56 · Nozzle size: 57 · Nozzle size: 58 · Nozzle size: 59 · Nozzle size: 60 · Nozzle size: 61 · Nozzle size: 62 · Nozzle size: 63 · Nozzle size: 64 · Nozzle size: 65 · Nozzle size: 66 · Nozzle size: 67 · Nozzle size: 68 · Nozzle size: 69 · Nozzle size: 70 · Nozzle size: 71 · Nozzle size: 72 · Nozzle size: 73 · Nozzle size: 74 · Nozzle size: 75 · Nozzle size: 76 · Nozzle size: 77 · Nozzle size: 78 · Nozzle size: 79 · Nozzle size: 80 · Nozzle size: 81 · Nozzle size: 82 · Nozzle size: 83 · Nozzle size: 84 · Nozzle size: 85 · Nozzle size: 86 · Nozzle size: 87 · Nozzle size: 88 · Nozzle size: 89 · Nozzle size: 90 · Nozzle size: 91 · Nozzle size: 92 · Nozzle size: 93 · Nozzle size: 94 · Nozzle size: 95 · Nozzle size: 96 · Nozzle size: 97 · Nozzle size: 98 · Nozzle size: 99 · Nozzle size: 100 · Nozzle size: 101 · Nozzle size: 102 · Nozzle size: 103 · Nozzle size: 104 · Nozzle size: 105 · Nozzle size: 106 · Nozzle size: 107 · Nozzle size: 108 · Nozzle size: 109 · Nozzle size: 110 · Nozzle size: 111 · Nozzle size: 112 · Nozzle size: 113 · Nozzle size: 114 · Nozzle size: 115 · Nozzle size: 116 · Nozzle size: 117 · Nozzle size: 118 · Nozzle size: 119 · Nozzle size: 120

EUR 4.30

Dell'Orto choke nozzle 60 PHBG 15 - 21 mm
undefined

Universal

23762

Dell'Orto choke nozzle 60 PHBG 15 - 21 mm

Manufacturer: Dell'Orto · Component group Carburetor: Spraying · Material: Brass · Carburetor type: PHBG · Nozzle type: Choke nozzle · Nozzle size: 60 · Drive: Slot

EUR 12.10

66HEROES Mushroom air filter grille 28 - 32 mm black
undefined

Universal

26152

66HEROES Mushroom air filter grille 28 - 32 mm black

Manufacturer: 66HEROES · Camouflaged: No · Area of application: Tuning · Color: black · Material: Metal · Material: Rubber · Filter type: Grille · Total length: 114 mm · Ø Internal connection: 28 mm · Ø Internal connection: 32 mm · Ø outside: 60 mm · Mounting type: Plug connection clamped

EUR 19.50

Dell'Orto secondary nozzle PHBG (size 30 - 70) of your choice
undefined
angle-right

Universal

27204

Dell'Orto secondary nozzle PHBG (size 30 - 70) of your choice

Manufacturer: Dell'Orto · Component group Carburetor: Spraying · Material: Brass · Carburetor type: PHBG · Nozzle type: Secondary nozzle · Nozzle size: 30 · Nozzle size: 35 · Nozzle size: 40 · Nozzle size: 45 · Nozzle size: 50 · Nozzle size: 55 · Nozzle size: 60 · Nozzle size: 65 · Nozzle size: 70 · Drive: Slot

EUR 6.00

swiing® ingenious air filter Dell'Orto PHBG with screw thread
undefined
angle-right

Universal

35679

swiing® ingenious air filter Dell'Orto PHBG with screw thread

Manufacturer: swiing® ingenious parts · Camouflaged: No · Thread type: MF32x1.25 (fine pitch thread) · Color: graphite colors · Material: Aluminum · Total length: 25 mm · Ø outside: 58 mm · Mounting type: Thread for screwing

EUR 55.00

Explore categories from Carburetor

S-10-40-060-10_Bing
Bing / swiing®
S-10-40-060-20_DellOrto
Dell'Orto
S-10-40-060-30_Stage6
Stage6
S-10-40-060-40_Polini
Polini
S-10-40-060-50_Keihin
Keihin
S-10-40-060-60_Mikuni
Mikuni
S-10-40-060-70_Solex
Solex
S-10-40-060-75_Gurtner
Gurtner
S-10-40-060-80_Sonstige
Other

Moped fans also bought

Hot Hot
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
undefined

For: Universal · Puch · Sachs · Zündapp Belmondo · Tomos · Alpa Chopper / Turbo · DKW · ILO / JLO · Kreidler · MBK / Motobécane · Miele · Monark · Victoria · Zündapp

10173

Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing

Ø nipple: 3 mm · Nipple length: 5 mm · Manufacturer: Made in Germany · Surface: galvanized (blue) · Ø Stranded wire: 1.25 mm · Cable length: 2200 mm · Material: Steel · Nipple shape: Cylinder · Number of components: 1 pcs · Area of application: Standard

EUR 2.95

GPO 18.5 mm intake manifold Dell'Orto PHBG | Puch E50
undefined

For: Puch

10659

GPO 18.5 mm intake manifold Dell'Orto PHBG | Puch E50

Manufacturer: GPO · Material: Aluminum · Camouflaged: No · Area of application: Tuning · Surface: polished · Ø inside: 18.8 mm · Total length: 40 mm · Color: Chrome · Ø External connection: 23.9 mm · Hole spacing inlet: 38 mm · Height flange center hole: 45 mm · Total height: 57 mm · Mounting type: Screws · Number of fixing points: 2 pcs

EUR 21.90

Gas cable Ø 1.2 mm x 165 cm (nipple ball) Dell'Orto
undefined

For: Universal · Puch · Sachs · Pony / Cilo (Beta 521 & 512) · Piaggio · Tomos · Cilo · Hercules

10703

Gas cable Ø 1.2 mm x 165 cm (nipple ball) Dell'Orto

Ø nipple: 3.5 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Ø Stranded wire: 1.2 mm · Nipple shape: Ball · Cable length: 1650 mm · Area of application: Standard · Number of components: 1 pcs

EUR 2.95

swiing® revival nozzle set M5 (70 - 92) Dell'Orto SHA, PHBG
undefined

For: Universal · Pony / Cilo (Beta 521 & 512) · Piaggio

10902

swiing® revival nozzle set M5 (70 - 92) Dell'Orto SHA, PHBG

Manufacturer: swiing® revival parts · Component group Carburetor: Spraying · Material: Brass · Quantity: 10 pcs · Carburetor type: PHBG · Carburetor type: SHA · Carburetor type: SHA (Piaggio) · Nozzle type: Main nozzle · Nozzle thread: M5x0.8 (standard thread) · Nozzle size: 70 · Nozzle size: 72 · Nozzle size: 75 · Nozzle size: 78 · Nozzle size: 80 · Nozzle size: 82 · Nozzle size: 85 · Nozzle size: 88 · Nozzle size: 90 · Nozzle size: 92 · Total length: 8 mm · Drive: Slot

EUR 25.60

Not in stock

Intake manifold 46 / 47 mm cylinder | Puch

For: Universal · Puch

11848

Intake manifold 46 / 47 mm cylinder | Puch

Camouflaged: No · Material: Aluminum · Ø inside: 19 mm · Ø External connection: 24 mm · Mounting type: Screws · Hole spacing inlet: 38 mm · Number of fixing points: 2 pcs · Total height: 75 mm · Height flange center hole: 65 mm · Total length: 60 mm · Area of application: Tuning

EUR 48.90

swiing® ingenious 19 mm PHBG intake manifold Speed Engine | Piaggio Ciao, SI, Bravo
undefined

For: Piaggio

22446

swiing® ingenious 19 mm PHBG intake manifold Speed Engine | Piaggio Ciao, SI, Bravo

Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: anodized · Color: graphite colors · Ø inside: 19 mm · Ø External connection: 24 mm · Mounting type: Screws · Hole spacing inlet: 36 mm · Number of fixing points: 2 pcs · Area of application: Tuning

EUR 36.70

AKOA intake manifold 20 mm PHBG / CP | Sachs 503 AB, ADV (A5669, A2180)
undefined

For: Sachs

33177

AKOA intake manifold 20 mm PHBG / CP | Sachs 503 AB, ADV (A5669, A2180)

Manufacturer: AKOA · Material: Aluminum · Ø inside: 20 mm · Ø External connection: 24 mm · Mounting type: Screws · Hole spacing inlet: 36 mm · Alternative version of the Pony OEM number: A2180 · Alternative version of the Pony OEM number: A5669

EUR 61.20