Hot 
Special ignition box with two programmable ignition curves for your moped / moped.
The ignition curves can be freely determined on the computer itself. To do this, you need software, which you can find on the HPI homepage (Tune Box) and download free of charge.
For tuning freaks with good technical knowledge.
The ignition box is compatible with all HPI-210 ignitions and is used instead of the usual CDI box.
To make things easier, the switch at the bottom of the accessory can be connected. This makes it easy to switch between the two ignition curves at the touch of a button. We also offer a complete set with all the individual parts you need for programming and use.
Installation:
When using the standard ignition box, the feed rate is set via the flywheel. With the programmable ignition box, however, this is done with the software. For this reason, the rotor must match the marking on the stator at TDC (0° preload). This can be seen in Figure 4.
The corresponding connection cable for the computer and other accessories can be found below in the accessories section.
Branded product from the manufacturer HPI – Horse Power Ignition.
| Manufacturer | HPI |
| Material | Plastic |
| Color | red |
| Total length | 63 mm |
| Width | 100 mm |
| Height | 28 mm |
| Ø mounting hole | 7.5 mm |
| Area of application | Performance, Racing, High End, Tuning |
| Hole spacing | 80 mm |
| Number of fixing points | 2 pcs |
| Universal |
| Puch |
| Sachs |
| Pony / Cilo (Beta 521 & 512) |
| Piaggio |
| Zündapp Belmondo |
Ratings
Accessories & related products
HPI racing ignition 12V with light 60W
Manufacturer: HPI · Material: Aluminum · Material: Steel · Ø Internal flywheel: 61.5 mm · Tension: 12 V · Light coil voltage: 12 V · Performance: 60 W · Direction of rotation: left · Direction of rotation: right · Ø mounting plate: 90 mm · Ø Flywheel outside: 71.5 mm · Ø cable: 7 mm · Mounting type: Screws · Number of fixing points: 6 pcs · Area of application: Tuning · Weight: 340 g
EUR 369.10
EUR 313.70
HPI flywheel (Bosch/Ducati)
Manufacturer: HPI · Material: Steel · Thread type: MF27x1 LH (fine/left-hand thread) · Direction of rotation: left · Direction of rotation: right · Ø cone small inside: 10.9 mm · Ø cone large inside: 15.8 mm · Ø Flywheel outside: 71.5 mm · Cone length: 28 mm · Cone ratio: 1:5 · Weight: 337 g
EUR 118.00
HPI stator ignition
Manufacturer: HPI · Material: Aluminum · Surface: anodized · Tension: 12 V · Ø inside: 27.5 mm · Performance: 60 W · Ø outside: 90 mm · Cable length: 640 mm · Color: black · Number of cables: 4 pcs · Ø bolt circle: 80 mm · Number of fixing points: 6 pcs · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning
EUR 184.50
HPI racing ignition set 12V with light 60W | Puch X30 Velux / Sachs 503 / Zündapp Belmondo
Manufacturer: HPI · Manufacturer: swiing · Tension: 12 V · Performance: 60 W · Direction of rotation: left · Direction of rotation: right · Ø mounting plate: 90 mm · Ø cable: 7 mm · Area of application: Tuning
EUR 461.40
Moped fans also bought
Hot
BERU spark plug connector / 1 kΩ interference suppressed
Manufacturer: BERU · Material: Sheet metal (steel) · Color: silver · Spark plug socket: M4 · Cable available: No · Suppressed: Yes · Resistance: 1000 Ω · Subcategory: Spark plug connector · Ø cable: 5 mm · Ø cable: 7 mm · Pony OEM number: A2099 · Sachs OEM no.: 0265 100 00
EUR 10.80
NGK B5ES spark plug long thread
Thread type: MF14x1.25 (fine pitch thread) · Manufacturer: NGK · Candle designation: B5ES · Candle thread type: long · Spark plug socket: M4 · Spark plug socket: SAE · Suppressed: No · Width across flats: 21 mm · Area of application: Original · Area of application: Standard
EUR 8.00
swiing® ingenious 100 g additional weight HPI Inox | Puch X30 Velux / Sachs 503 / Belmondo
Ø inside: 71.8 mm · Ø outside: 117 mm · Manufacturer: swiing® ingenious parts · Material: Chrome steel (colloquially known as stainless steel) · Surface: blank · Thickness: 1.8 mm · Ø bolt circle: 101 mm · Ø mounting hole: 5 mm · Number of fixing points: 4 pcs · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Weight: 100 g
EUR 24.50
swiing® ingenious fan wheel red (EVO, HPI, Bosch, Ducati) | Puch X30 Velux / Sachs 503 / Belmondo
Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: anodized · Ø inside: 39 mm · Ø outside: 120 mm · Color: red · Ø bolt circle: 48 mm · Ø bolt circle: 70 mm · Ø bolt circle: 100 mm · Height: 13.5 mm · Ø mounting hole: 6 mm · Number of fixing points: 10 pcs · Weight: 87 g
EUR 76.90
Collection only possible with online purchase and appointment.
