Additional weight made of stainless steel suitable for HPI ignitions from Sachs 503, Puch X30 Velux, as well as Zündapp Belmondo mopeds with blower.
The weight is mounted underneath the blower wheel in the accessory.
The weight is mainly used to increase the flywheel mass.
The additional weight means that the engine runs more smoothly when stationary and starting is easier without stalling the engine, which is often the case with a lighter flywheel.
Exceptional product for the highest demands of the swiing® quality brand.
| Ø inside | 71.8 mm |
| Ø outside | 117 mm |
| Thickness | 1.8 mm |
| Manufacturer | swiing® ingenious parts |
| Material | Chrome steel (colloquially known as stainless steel) |
| Area of application | Performance, Racing, High End, Tuning |
| Ø bolt circle | 101 mm |
| Number of fixing points | 4 pcs |
| Ø mounting hole | 5 mm |
| Weight | 100 g |
| Universal | |
| Puch | ZA50 (fan-cooled) Z50 (X30 Velux) |
| Sachs | 503 - AAL , ABL , 2AL / 2BL , AB , AC , ADV |
| Pony / Cilo (Beta 521 & 512) | Beta 512 Beta various Beta 521 (engine) |
| Zündapp Belmondo |
Accessories & related products
HPI racing ignition 12V with light 60W
Manufacturer: HPI · Material: Aluminum · Material: Steel · Light coil voltage: 12 V · Weight: 340 g · Direction of rotation: left · Direction of rotation: right · Ø mounting plate: 90 mm · Number of fixing points: 6 pcs · Ø Internal flywheel: 61.5 mm · Tension: 12 V · Ø Flywheel outside: 71.5 mm · Ø cable: 7 mm · Performance: 60 W · Area of application: Tuning · Mounting type: Screws
EUR 367.60
HPI racing ignition clockwise without light
Manufacturer: HPI · Material: Aluminum · Material: Steel · Weight: 424 g · Direction of rotation: left · Direction of rotation: right · Ø mounting plate: 90 mm · Number of fixing points: 3 pcs · Ø Flywheel outside: 62 mm · Ø cable: 7 mm · Area of application: Tuning · Mounting type: Screws
EUR 343.10
HPI flywheel (Bosch / Ducati)
Manufacturer: HPI · Material: Steel · Weight: 337 g · Thread type: MF27x1 LH (fine/left-hand thread) · Direction of rotation: left · Direction of rotation: right · Ø cone small inside: 10.9 mm · Ø cone large inside: 15.8 mm · Ø Flywheel outside: 71.5 mm · Cone length: 28 mm · Cone ratio: 1:5
EUR 117.50
Not in stock
HPI stator ignition
Ø inside: 27.5 mm · Ø outside: 90 mm · Manufacturer: HPI · Material: Aluminum · Surface: anodized · Color: black · Ø bolt circle: 80 mm · Number of fixing points: 6 pcs · Number of cables: 4 pcs · Tension: 12 V · Performance: 60 W · Cable length: 640 mm · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning
EUR 183.70
swiing® ingenious fan wheel black (EVO, HPI, Bosch,Ducati) | Puch X30 Velux / Sachs 503 / Belmondo
Ø inside: 39 mm · Ø outside: 120 mm · Height: 13.5 mm · Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: anodized · Color: black · Weight: 87 g · Ø bolt circle: 48 mm · Ø bolt circle: 70 mm · Ø bolt circle: 100 mm · Number of fixing points: 10 pcs · Ø mounting hole: 5.5 mm · Ø mounting hole: 6 mm
EUR 73.40
swiing® ingenious 250 g additional weight HPI Inox | Puch X30 Velux / Sachs 503 / Belmondo
Ø inside: 71.8 mm · Ø outside: 117 mm · Thickness: 5 mm · Manufacturer: swiing® ingenious parts · Material: Chrome steel (colloquially known as stainless steel) · Weight: 250 g · Ø bolt circle: 101 mm · Number of fixing points: 4 pcs · Ø mounting hole: 5 mm · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning
EUR 31.80
Hot 
HPI ignition box programmable (two ignition curves)
Width: 100 mm · Height: 28 mm · Manufacturer: HPI · Hole spacing: 80 mm · Material: Plastic · Color: red · Number of fixing points: 2 pcs · Ø mounting hole: 7.5 mm · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Total length: 63 mm
EUR 373.70
Moped fans also bought
Hot
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø nipple: 3 mm · Number of components: 1 pcs · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Area of application: Standard · Ø Stranded wire: 1.25 mm · Cable length: 2200 mm · Nipple shape: Cylinder · Nipple length: 5 mm
EUR 2.95
Motorex engine oil (gear oil) manual 450 ml
Manufacturer: Motorex · Oil type: GL4 · Viscosity (SAE): 80W · Contents: 450 ml · Gearbox type: Foot control · Area of application: Gearbox lubrication with clutch · Gearbox type: Manual gearshift · Temperature resistance (min.): -30 - 220 °C
EUR 14.10
EUR 31.33/l
HPI racing ignition 12V with light 60W
Manufacturer: HPI · Material: Aluminum · Material: Steel · Light coil voltage: 12 V · Weight: 340 g · Direction of rotation: left · Direction of rotation: right · Ø mounting plate: 90 mm · Number of fixing points: 6 pcs · Ø Internal flywheel: 61.5 mm · Tension: 12 V · Ø Flywheel outside: 71.5 mm · Ø cable: 7 mm · Performance: 60 W · Area of application: Tuning · Mounting type: Screws
EUR 367.60
swiing® ingenious fan wheel black (EVO, HPI, Bosch,Ducati) | Puch X30 Velux / Sachs 503 / Belmondo
Ø inside: 39 mm · Ø outside: 120 mm · Height: 13.5 mm · Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: anodized · Color: black · Weight: 87 g · Ø bolt circle: 48 mm · Ø bolt circle: 70 mm · Ø bolt circle: 100 mm · Number of fixing points: 10 pcs · Ø mounting hole: 5.5 mm · Ø mounting hole: 6 mm
EUR 73.40
swiing® ingenious 250 g additional weight HPI Inox | Puch X30 Velux / Sachs 503 / Belmondo
Ø inside: 71.8 mm · Ø outside: 117 mm · Thickness: 5 mm · Manufacturer: swiing® ingenious parts · Material: Chrome steel (colloquially known as stainless steel) · Weight: 250 g · Ø bolt circle: 101 mm · Number of fixing points: 4 pcs · Ø mounting hole: 5 mm · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning
EUR 31.80
HPI racing ignition set 12V with light 60W | Puch X30 Velux / Sachs 503 / Zündapp Belmondo
Manufacturer: HPI · Manufacturer: swiing® ingenious parts · Tension: 12 V · Performance: 60 W · Direction of rotation: left · Direction of rotation: right · Ø mounting plate: 90 mm · Ø cable: 7 mm · Area of application: Tuning
EUR 459.50
swiing® ingenious fan wheel red (EVO, HPI, Bosch, Ducati) | Puch X30 Velux / Sachs 503 / Belmondo
Manufacturer: swiing® ingenious parts · Material: Aluminum · Color: red · Ø inside: 39 mm · Height: 13.5 mm · Ø bolt circle: 48 mm · Ø bolt circle: 70 mm · Ø bolt circle: 100 mm · Surface: anodized · Ø mounting hole: 6 mm · Ø outside: 120 mm · Weight: 87 g · Number of fixing points: 10 pcs
EUR 76.60
Working late? Evening hours on Thursday until 20:00
