Clutch drum of the Primärantrieb for 2-speed manual Z50 engines of Puch X30 NS, NL mopeds / mopeds.
This clutch basket is used in combination with primary drive sprockets, which have 69 teeth.
Number of teeth: 19
Toothing: helical
Total height: 26.6 mm
Number of plates: Two-plate clutch
Note: There may be a slight singing after installation until the tooth flanks are ground in cleanly on the primary gear.
You can find the sliding blocks, thrust washers and other parts in the accessories section.
Original Puch spare part number: 350.1.12.002.2
| Manufacturer | HS-Retro |
| Material | Steel |
| Area of application | Original, High End |
| Ø inside | 17 mm |
| Toothing type | helical toothed |
| Ø outside | 74.8 mm |
| Number of teeth | 19 pcs |
| Height | 26.6 mm |
| Puch OEM number | 350.1.12.002.2 |
| Puch | Z50 (X30 Sport) Z50 (X30 Velux) |
Accessories & related products
Surflex clutch plate set | Puch Z50
Manufacturer: Surflex · Material: Composite materials · Material: Steel · Recording type: Interlocking · Number of slats: 2 pcs · Thickness: 2.75 mm · Ø outside: 69.6 mm · Ø outside: 74.8 mm · Ø inside: 46.3 mm · Ø inside: 51.3 mm · Area of application: Original
EUR 42.80
Not in stock
Serrated lock washer M10 galvanized
Material: Steel · Surface: galvanized (blue) · Ø inside: 4.5 mm · Ø inside: 5.5 mm · Ø inside: 6.35 mm · Ø inside: 7.4 mm · Ø inside: 10.8 mm · Ø inside: 12.8 mm · Thread size: M10 · Thread size: M12 · Thread size: M4 · Thread size: M5 · Thread size: M6 · Thread size: M7 · Thread size: M8
EUR 0.40
Explore categories from Clutch
Moped fans also bought
swiing® revival gasket set Z50 engine | Puch X30 NS / NL
Manufacturer: swiing® revival parts · Number of components: 10 pcs · Material: Sealing paper · Ø outlet inside: 22 mm · Area of application: Standard · Hole spacing inlet: 32 - 38 mm · Hole pattern [mm]: 44 x 44 · Hole spacing outlet: 42 mm
EUR 24.40
swiing® revival gearbox cover gasket (old model) | Puch Z50 engine
Manufacturer: swiing® revival parts · Material: Sealing paper · Color: sand-colored · Thickness: 0.35 mm · Total length: 166 mm · Width: 155 mm · Number of fixing points: 8 pcs · Number of components: 1 pcs · Puch OEM number: 349.1.10.249.1
EUR 4.80
Motorex engine oil (gear oil) manual 450 ml
Temperature resistance (min.): -30 - 220 °C · Manufacturer: Motorex · Oil type: GL4 · Viscosity (SAE): 80W · Contents: 450 ml · Gearbox type: Foot control · Gearbox type: Manual gearshift · Area of application: Gearbox lubrication with clutch
EUR 13.40
EUR 29.78/l
swiing® ingenious clutch spring reinforced +40% | Puch Z50
Spring design: Pressure spring · Ø wire: 4.5 mm · Manufacturer: swiing® ingenious parts · Material: Spring steel · Surface: coated · Number of components: 1 pcs · Total length: 23.5 mm · Ø inside: 30 mm · Ø outside: 39 mm · Area of application: Tuning · Color: red
EUR 29.30
Working late? Evening hours on Thursday until 20:00
