Gearwheel of the primary drive for 2-speed manual Z50 engines of Puch X30 NS, NL mopeds / mopeds.
This drive wheel is used in combination with clutch pistons, which have 19 teeth.
Number of teeth: 69
Toothing: helical
Mounting: 3-prong profile
Note: There may be a slight singing after installation until the tooth flanks are ground in cleanly on the clutch basket.
The fastening nut and other parts can be found under accessories.
Original Puch spare part number: 349.3.13.200.1
| Manufacturer | HS-Retro |
| Material | Steel |
| Toothing type | helical toothed |
| Ø outside | 95 mm |
| Recording type | 3-tooth splined shaft holder |
| Number of teeth | 69 pcs |
| Ø inside | 12.5 mm |
| Puch OEM number | 349.3.13.200.1 |
| Puch | Z50 (X30 Sport) |
Ratings
Accessories & related products
HS-Retro bearing ring 24/32/7.5 large Z50 (1A quality) | Puch X30 NS, NL
Manufacturer: HS-Retro · Area of application: High End · Area of application: Original · Material: Steel · Surface: hardened & ground · Ø inside: 23.8 mm · Ø outside: 31.98 mm · Width: 7.55 mm · Puch OEM number: 329.1.13.065.1
EUR 72.70
HS-Retro bearing race 19.4/28.1/7.5 small Z50 (1A quality) | Puch X30 NS, NL
Manufacturer: HS-Retro · Area of application: High End · Area of application: Original · Material: Steel · Surface: hardened & ground · Ø inside: 19.44 mm · Ø outside: 28.1 mm · Width: 7.5 mm · Puch OEM number: 329.1.13.010.1
EUR 55.40
HS-Retro clutch basket 19 teeth 2-plate version | Puch Z50
Manufacturer: HS-Retro · Area of application: High End · Area of application: Original · Material: Steel · Toothing type: helical toothed · Ø inside: 17 mm · Number of teeth: 19 pcs · Ø outside: 74.8 mm · Height: 26.6 mm · Puch OEM number: 350.1.12.002.2
EUR 197.30
Moped fans also bought
Inox
Hot 
GPO license plate holder Inox (CH version)
Material: Chrome steel (colloquially known as stainless steel) · Color: silver · Total length: 145 mm · Height: 5.3 mm · Number of fixing points: 2 pcs · Ø mounting hole: 5 mm · Manufacturer: GPO · Width: 105 mm · Mounting type: Nuts & bolts · Thread length: 8 mm · Thread type: M5x0.8 (standard thread) · Hole spacing: 30 mm · Hole spacing: 50 mm
EUR 13.50
Not in stock
Airsal 46 mm cylinder kit straight exhaust | Puch
Manufacturer: Airsal · Material: Aluminum · Surface: sandblasted · Crankshaft stroke: 43 mm · Nominal diameter: 46 mm · Hole spacing inlet: 38 mm · Thread inlet: M6x1 (standard thread) · Hole spacing outlet: 42 mm · Outlet type: straight · Ø piston pin (B): 12 mm · Thread outlet: M6x1 (standard thread) · Number of fixing points: 4 pcs · Area of application: Tuning · Hole pattern [mm]: 44 x 44 · Camouflaged: No
EUR 246.70
Surflex clutch plate set | Puch Z50
Ø inside: 46.3 mm · Ø inside: 51.3 mm · Manufacturer: Surflex · Ø outside: 69.6 mm · Ø outside: 74.8 mm · Thickness: 2.75 mm · Material: Composite materials · Area of application: Original · Material: Steel · Recording type: Interlocking · Number of slats: 2 pcs
EUR 43.10
swiing® ingenious clutch spring reinforced +40% | Puch Z50
Spring design: Pressure spring · Manufacturer: swiing® ingenious parts · Material: Spring steel · Surface: coated · Number of components: 1 pcs · Ø outside: 39 mm · Color: red · Ø wire: 4.5 mm · Ø inside: 30 mm · Total length: 23.5 mm · Area of application: Tuning
EUR 29.50
HS-Retro clutch basket 19 teeth 2-plate version | Puch Z50
Manufacturer: HS-Retro · Area of application: High End · Area of application: Original · Material: Steel · Toothing type: helical toothed · Ø inside: 17 mm · Number of teeth: 19 pcs · Ø outside: 74.8 mm · Height: 26.6 mm · Puch OEM number: 350.1.12.002.2
EUR 197.30
Collection only possible with online purchase and appointment.
