Clutch springs in three thicknesses for the Jammer clutch on your Puch and Tomos moped / moped.
As the original springs tend to break, they can be replaced by Malossi springs.
The springs are supplied in 3 thicknesses:
Weak (white): 2.25 mm, 32.65 mm
Medium (yellow): 2.28 mm, 32.3 mm
Strong (red): 2.42 mm, 32.0 mm
We recommend stretching the springs once (pulling them into length) before installation so that the color loosens and the spring can function properly.
You can find more clutch springs in the accessories section.
Quality product from the Italian manufacturer Malossi.
| Spring design | Tension spring |
| Ø wire | 2.2 mm, 2.3 mm, 2.4 mm |
| Manufacturer | Malossi |
| Material | Spring steel |
| Surface | varnished |
| Area of application | Tuning |
| Color | white, yellow, red |
| Total length | 32.6 mm |
| Puch | E50 |
| Tomos |
Accessories & related products
Hot 
Jammer racing clutch special 65 ccm and more | Puch E50
Manufacturer: Jammer · Material: Steel · Material addition: Steel · Ø outside: 92.5 mm · Area of application: High End · Area of application: MX · Area of application: Racing · Area of application: Tuning · Recording type: Cone mounting · Number of jaws: 3 pcs · Number of springs: 3 pcs · Thickness: 19 mm
EUR 231.80
Not in stock
Jammer clutch 1st gear | Tomos A35, A55
Manufacturer: Jammer · Material: Steel · Material addition: Aluminum · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Recording type: Interlocking · Number of jaws: 3 pcs · Number of springs: 3 pcs · Tomos OEM number: 227849
EUR 231.80
Moped fans also bought
GPO sprocket 45 teeth black | Puch Maxi, Puch X30 NG-2AH
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Manufacturer: GPO · Material: Steel · Surface: powder-coated · Color: black · Thickness: 4.5 mm · Number of teeth: 45 pcs · Ø mounting hole: 6.7 mm · Ø inside: 94 mm · Hole spacing: 36.5 mm · Hole spacing 2: 68 mm · Cranking (offset): 8 mm · Ø bolt circle: 105.5 mm · Number of fixing points: 6 pcs
EUR 24.30
swiing® revival 12 mm carburetor (original) | Puch
Manufacturer: swiing® revival parts · Material: Aluminum · Component group Carburetor: Carburetor complete · Area of application: Standard · Nominal diameter: 12 mm · Carburetor type: SRE · Color: gray · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Ø fuel hose connection: 6 mm · Nozzle size: 52 · Ø Inside entrance: 12 mm · Ø Internal connection: 20 mm · Ø Output inside: 12 mm · Ø Air filter connection: 20 mm · Height: 108 mm · Total length: 65 mm · Mixed oil connection: No · Mounting type: Plug connection clamped · Vacuum connection: No · Width: 50 mm · Nozzle block: 2.15 · Camouflaged: No · Clamping screw torque (max.): 4 N/m
EUR 85.30
swiing® revival gasket gearbox cover engine 1 mm | Puch E50
Manufacturer: swiing® revival parts · Material: Sealing paper · Color: sand-colored · Thickness: 1 mm · Ø inside: 106 mm · Ø outside: 116 mm · Number of fixing points: 4 pcs · Number of components: 1 pcs · Alternative version of the Puch OEM number: 349.1.10.349.1
EUR 4.75
swiing® ingenious pull starter | Puch E50 MVT ignition
Surface: chrome-plated · Surface: raw · Manufacturer: swiing® ingenious parts · Material: Plastic · Material: Steel · Ø outside: 130 mm · Ignition system: MVT Allumage · Width: 150 mm · Height: 82 mm · Color: Chrome · Color: black-matt · Total length: 170 mm · Hole spacing: 138 mm · Number of fixing points: 2 pcs
EUR 183.00
Not in stock
Collection only possible with online purchase and appointment.
