Three clutch springs suitable for the Jammer racing clutch of your Puch Maxi S and N moped / moped with E50 engine.
These medium-strength springs for the centrifugal clutch change the clutch engagement behavior so that a higher speed is required until the clutch engages.
Note: We recommend stretching the springs once (pulling them into length) before installation so that the color loosens and the spring can function properly.
Other clutch spring sets and complete racing clutches can be found in the accessories section.
Quality product from the American manufacturer Jammer Clutches.
| Spring design | Tension spring |
| Length spring hook | 10.8 mm |
| Leg length | 13.5 mm, 9.6 mm |
| Ø wire | 1.6 mm |
| Manufacturer | Jammer |
| Material | Spring steel |
| Surface | varnished |
| Color | green |
| Ø inside | 7.4 mm |
| Ø outside | 11 mm |
| Total length | 37 mm |
| Area of application | Tuning |
| Puch | E50 |
Accessories & related products
Jammer clutch 1st gear (aluminum carrier) | Tomos A35, A55
Manufacturer: Jammer · Material: Steel · Material addition: Aluminum · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Number of jaws: 3 pcs · Recording type: Interlocking · Number of springs: 3 pcs · Tomos OEM number: 227849
EUR 220.50
Malossi replacement clutch springs Jammer clutch | Puch, Tomos
Spring design: Tension spring · Ø wire: 2.2 mm · Ø wire: 2.3 mm · Ø wire: 2.4 mm · Manufacturer: Malossi · Material: Spring steel · Surface: varnished · Total length: 32.6 mm · Color: red · Color: white · Color: yellow · Area of application: Tuning
EUR 36.70
GPO clutch spring set Jammer clutch "Stage 1" pink
Spring design: Tension spring · Length spring hook: 8 mm · Length spring hook: 14 mm · Ø wire: 1.1 mm · Ø inside: 7.7 mm · Manufacturer: GPO · Ø outside: 9.9 mm · Total length: 34 mm · Color: pink · Material: Spring steel · Surface: varnished · Area of application: Tuning
EUR 14.60
Explore categories from Clutch
Moped fans also bought
Not so nice 
15 mm intake manifold | Puch E50
Camouflaged: Yes · Material: Aluminum · Area of application: Tuning · Total length: 47 mm · Ø inside: 14.5 mm · Mounting type: Screws · Number of fixing points: 2 pcs · Ø External connection: 20 mm · Hole spacing inlet: 38 mm · Height flange center hole: 43 mm · Total height: 54 mm
EUR 14.60
Hot 
GPO flywheel trigger M26x1.5 / M22x1.5 | Puch, Sachs, Tomos, Beta 521
Width across flats trigger: 27 mm · Width across flats Screw: 19 mm · Manufacturer: GPO · Clamping depth: 10 mm · Area of application: (Dis)assembly tool · Material: Steel · Surface: blackened · Number of components: 1 pcs · Total length: 55 mm · Total length: 75 mm · Thread type: MF22x1.5 (fine pitch thread) · Thread type: MF26x1.5 (fine pitch thread) · Strength class: 8.8
EUR 12.10
Handlebar fork plate 35 cm curved with chrome strut
Manufacturer: Made in Germany · Material: Steel · Color: Chrome · Surface: chrome-plated · Fork plate holder length: 90 mm · Width: 720 mm · Height: 350 mm · Mounting type: Fork plate · Length handlebar ends: 150 mm · Ø outside: 22 mm · Crossbar: Yes · Ø Strut: 14 mm · Strut length: 260 mm · Clamping diameter: 22 mm
EUR 41.10
swiing® revival gasket gearbox cover engine 1 mm | Puch E50
Manufacturer: swiing® revival parts · Material: Sealing paper · Color: sand-colored · Ø inside: 106 mm · Ø outside: 116 mm · Thickness: 1 mm · Number of fixing points: 4 pcs · Number of components: 1 pcs · Alternative version of the Puch OEM number: 349.1.10.349.1
EUR 4.80
GPO clutch spring set Jammer clutch "Stage 2" blue
Spring design: Tension spring · Length spring hook: 8 mm · Length spring hook: 14 mm · Ø wire: 1.3 mm · Manufacturer: GPO · Total length: 34 mm · Color: blue · Material: Spring steel · Surface: varnished · Ø inside: 7.3 mm · Ø outside: 9.9 mm
EUR 14.60
Attention: new opening hours from 16.02.2026 & new evening sale on Thursday 17:30-20:00
