Steel cover plate for the reed valve inlet of the 47 mm Gilardoni italkit Puch cylinder kit.
The reed valve cover is used to close the reed valve system in order to convert the cylinder kit to a housing inlet (GME).
Outer dimensions: 72.5 x 48 mm
Hole pattern: 60 x 35 mm
Material thickness: 5 mm
Material: steel
You can find corresponding additional material such as seals, sealing compound etc. in the accessories section.
| Width | 48 mm |
| Manufacturer | MBR |
| Total length | 72.5 mm |
| Material | Steel |
| Surface | raw |
| Area of application | Tuning |
| Ø mounting hole | 6.3 mm |
| Thickness | 5 mm |
| Number of fixing points | 4 pcs |
| Hole pattern [mm] | 60 x 35 mm |
| Mounting type | Screws |
| Puch |
Accessories & related products
Gilardoni italkit 47 mm Cylinder Kit (without head) | Puch E50 / Z50 / ZA50
Manufacturer: Gilardoni italkit · Material: Aluminum · Camouflaged: No · Surface: sandblasted · Displacement: 75 ccm · Crankshaft stroke: 43 mm · Nominal diameter: 47 mm · Ø cylinder neck: 51 mm · Ø outlet inside: 26.5 mm · Ø Inlet inside: 18.3 mm · Inlet window: 38.5 x 25.8 mm · Thread inlet: M6x1 (standard thread) · Ø piston pin (B): 12 mm · Number of fixing points: 4 pcs · Hole spacing outlet: 42 mm · Outlet type: slanted · Hole pattern [mm]: 44 x 44 · Thread outlet: M6x1 (standard thread) · Decompressor: No · Hole spacing inlet: 35.5 mm · Hole spacing inlet: 60 mm · Area of application: Tuning
EUR 257.30
Not in stock
Elring Dirko HT sealing compound red (silicone) high temp. 70 ml elastic up to 315°C
Manufacturer: Elring · Contents: 70 ml · Color: red · Hazard warning: Causes serious eye irritation · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Temperature resistance (min.): -60 - 300 °C · Gap dimension (max.): 2 mm · Area of application: Chemistry
EUR 28.10
EUR 401.43/l
Explore categories from Carburetor & intake system
Moped fans also bought
Stage6 8-folding diaphragm by Moto Tassinari (Gilardoni italkit)
Manufacturer: Stage6 · Material: Plastic · Surface: raw · Number of flaps: 8 pcs · Membrane material: Carbon · Thick membrane platelets: 0.3 mm · Ø mounting hole: 6.6 mm · Number of fixing points: 4 pcs · Hole pattern [mm]: 60 x 34.8 mm · Mounting type: Screws · Total length: 77 mm · Width: 49 mm · Area of application: High End
EUR 140.80
Not in stock
Stage6 R/T RT-PWK 21 mm carburetor "Black-Edition"
Manufacturer: Stage6 R/T · Component group Carburetor: Carburetor complete · Surface: varnished · Color: black · Carburetor type: RT-PWK · Nominal diameter: 21 mm · Ø Air filter connection: 50 mm · Mixed oil connection: Yes · Vacuum connection: Yes · Choke control: Hand choke · Nozzle thread: M5x0.8 (standard thread) · Mounting type: Flange · Mounting type: Plug connection · Area of application: Tuning
EUR 204.60
MBR piston 46.94 mm Gilardoni italkit GME | Puch
Manufacturer: MBR · Manufacturer: Wössner · Surface: molybdenum-coated · Ø outside piston (A): 46.94 mm · Compression height (C): 21.5 mm · Curvature (D): 2.63 mm · Total piston height (E): 48.15 mm · Number of piston rings (F): 1 pcs · Nominal diameter: 47 mm · Piston ring mold: Rectangular ring · Piston ring impact: Internal fuse (IS) · Piston ring height: 1 mm · Ø piston pin (B): 12 mm · Weight piston kit: 97 g
EUR 145.70
Working late? Evening hours on Thursday until 20:00
