Chrome-plated, adjustable dampers for your moped, moped and small motorcycle.
The hardness or preload of the dampers can be adjusted in five stages thanks to the special spring mount.
Length (mount - mount): 340 mm
Outer diameter of coil spring: 46 mm
Holt diameter: 24 mm
Bush diameter for mounting: 10 / 8 mm
With the plastic bushes supplied, the diameter at the mounting points can be shortened from 10 mm to 8 mm.
The rear springs should always be secured with large washers to prevent the plastic bushes from shifting if lateral forces occur.
The scope of delivery includes one pair.
Rear springs in other colors, the matching adjustment key, washers and fastening material can be found in the accessories section.
Suspension strut from the MKX-SHOCK brand.
| Manufacturer | MKX |
| Surface | chrome-plated |
| Damping type | Spring |
| Adjustable | Yes |
| Ø outside | 46 mm |
| Ø spars | 24 mm |
| Color | Chrome |
| Ø Fastening inside | 8 mm, 10 mm |
| Number of fixing points | 2 pcs |
| Hole spacing | 340 mm |
| Mounting type | Nuts & bolts |
Accessories & related products
Loctite 243 medium-strength threadlocker 10 ml
Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Contents [ml]: 10 ml · Color: blue · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Area of application: Chemistry · Adhesion: medium strength · Type of application: 1K · Gap dimension (max.): 0.01 mm · Alignment time: 600 sec · Temperature resistance (min.): -75 - 200 °C · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
EUR 26.70
EUR 2’670.00/l
MKX shock absorber 34 cm black
Manufacturer: MKX · Surface: varnished · Damping type: Spring · Color: black · Ø outside: 46 mm · Adjustable: Yes · Ø Fastening inside: 8 mm · Ø Fastening inside: 10 mm · Ø spars: 24 mm · Hole spacing: 340 mm · Mounting type: Nuts & bolts · Number of fixing points: 2 pcs
EUR 60.90
Moped fans also bought
Not so nice 
Chrome luggage rack | Puch Maxi S
Material: Steel · Surface: chrome-plated · Color: Chrome · Mounting type: Nuts & bolts · Total length: 425 mm · Width: 168 mm · Ø mounting hole: 8.3 mm · Ø mounting hole: 9 mm · Hole spacing: 29 mm · Height: 32.5 mm · Wheel size [inch]: 17 " · Number of fixing points: 4 pcs
EUR 24.30
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Manufacturer: Magura · Material: Brass · Material: Steel · Surface: nickel-plated · Ø outside: 5 mm · Ø Cable bushing: 1.6 mm · Drive: Slot · Total length: 6 mm · Screw head: Lens head · Thread type: M4x0.7 (standard thread) · Thread length: 4 mm · Number of components: 2 pcs
EUR 2.45
Fortune / Merrick 2.00-2.50 x 16/17" inner tube
Manufacturer: Fortune · Tire width [inch]: 2 - 2.5 " · Tire width [mm]: 50.8 - 63.5 · Width [inch]: 2 · Width [inch]: 2 1/4 · Width [inch]: 2 1/2 · Tire height [%]: 100 · Old designation: 20 x 2 · Old designation: 20 x 2.25 · Old designation: 20 x 2.5 · Old designation: 21 x 2 · Old designation: 21 x 2.25 · Old designation: 21 x 2.5 · Valve type: TR4 Auto valve · Wheel size [inch]: 16 - 17 " · Wheel size [inch]: 17 "
EUR 12.10
Not in stock
Transval speedometer drive 17" with grease nipple
Manufacturer: Transval · Material: Aluminum · Color: gray · Ø outside: 41 mm · 4-edge speedometer cable: 1.8 mm · Thread type: MF10x1 (fine pitch thread) · Overall width outside: 60 mm · Ø axle: 11 mm · Place of use: left · Place of use: right · Ø mounting hole: 11 mm · Wheel size [inch]: 17 " · Total height: 52 mm
EUR 36.50
Collection only possible with online purchase and appointment.
