Special exhaust for various Puch mopeds / mopeds which are equipped with a racing cylinder. The racing silencer fits cylinders with a narrow outlet.
This racing exhaust impresses with its solid construction and high-quality workmanship. The silencer is lined with stainless sheet steel (chrome steel).
Ideally, the tuning muffler should be used in conjunction with cylinder kits from 46 mm to exploit the full power.
Due to the huge resonance body, this racing muffler gives your moped a brute increase in power in the middle and upper speed range.
Mounting aids and other add-on parts can be found in the accessories section.
Handmade quality product from the manufacturer MLM.
| Manufacturer | MLM |
| Material | Steel |
| Color | black |
| Mounting type | Welded lug |
| Flame tube attachment | Flange |
| Number of fixing points | 1 pcs |
| Exhaust type | Cone / double cone |
| Puch | E50 |
Ratings
Accessories & related products
Metrakit 47 mm cylinder kit 75 ccm
Nominal diameter: 47 mm · Manufacturer: Metracite · Material: Gray cast iron · Camouflaged: No · Surface: varnished · Crankshaft stroke: 43 mm · Displacement: 75 ccm · Number of fixing points: 4 pcs · Ø piston pin (B): 12 mm · Thread inlet: M6x1 (standard thread) · Hole pattern [mm]: 44 x 44 · Hole spacing outlet: 42 mm · Outlet type: slanted · Thread outlet: M6x1 (standard thread) · Area of application: Tuning
EUR 416.10
Not in stock
Airsal 47 mm cylinder kit angled exhaust | Puch
Nominal diameter: 47 mm · Manufacturer: Airsal · Material: Aluminum · Camouflaged: No · Surface: sandblasted · Area of application: Tuning · Crankshaft stroke: 43 mm · Displacement: 75 ccm · Hole spacing inlet: 38 mm · Ø piston pin (B): 12 mm · Thread inlet: M6x1 (standard thread) · Hole pattern [mm]: 44 x 44 · Hole spacing outlet: 42 mm · Outlet type: slanted · Number of fixing points: 4 pcs · Thread outlet: M6x1 (standard thread)
EUR 208.00
Gilardoni italkit 47 mm cylinder kit without cylinder head | Puch
Nominal diameter: 47 mm · Manufacturer: Gilardoni italkit · Material: Aluminum · Camouflaged: No · Surface: sandblasted · Crankshaft stroke: 43 mm · Displacement: 75 ccm · Ø cylinder neck: 51 mm · Ø outlet inside: 26.5 mm · Ø Inlet inside: 18.3 mm · Hole spacing inlet: 35.5 mm · Hole spacing inlet: 60 mm · Number of fixing points: 4 pcs · Ø piston pin (B): 12 mm · Inlet window: 38.5 x 25.8 · Thread inlet: M6x1 (standard thread) · Hole pattern [mm]: 44 x 44 · Hole spacing outlet: 42 mm · Outlet type: slanted · Thread outlet: M6x1 (standard thread) · Decompressor: No · Area of application: Tuning
EUR 256.90
swiing® ingenious gasket outlet 28 mm graphite
Manufacturer: swiing® ingenious parts · Material: Graphite / Graphite · Place of use: Exhaust · Reinforced: No · Thickness: 3 mm · Ø outlet inside: 28 mm · Hole spacing outlet: 42.5 mm · Ø inside: 27.4 mm · Ø screw holder: 6.6 mm · Area of application: Tuning
EUR 9.05
Moped fans also bought
Motorex engine oil (gear oil) manual 450 ml
Manufacturer: Motorex · Viscosity (SAE): 80W · Oil type: GL4 · Contents: 450 ml · Gearbox type: Foot control · Gearbox type: Manual gearshift · Temperature resistance (min.): -30 - 220 °C · Area of application: Gearbox lubrication with clutch
EUR 12.10
EUR 26.89/l
Simonini carbon exhaust | Puch
Manufacturer: Simonini · Material: Steel · Surface: varnished · Ø outside: 90 mm · Mounting type: Welded lug · Ø Silencer: 60 mm · Flame tube attachment: Flange · Number of fixing points: 1 pcs · Ø Flame tube outside: 30 mm · Exhaust type: Cone / double cone · Ø Internal connection: 24 mm · Total length: 875 mm
EUR 269.20
Cable set cut with adjusting screws | Puch Maxi
Ø Stranded wire: 1.25 mm · Ø Stranded wire: 1.5 mm · Ø Stranded wire: 1.8 mm · Nipple shape: Barrel (transverse) · Nipple shape: Cylinder · Nipple shape: Pears · Manufacturer: Made in Germany · Material: Brass · Material: Steel · Quantity: 4 pcs · Total length: 1200 mm · Total length: 1250 mm · Total length: 1450 mm · Total length: 1830 mm · Color: black · Outer shell length: 1120 mm · Outer shell length: 1150 mm · Outer shell length: 1740 mm
EUR 42.70
DMP intake rubber Ø 33.5 / 33.5 x 31.5 with clamps
Manufacturer: DMP · Material: Rubber · Overall length (A): 31.3 mm · Ø Passage (B): 30.7 mm · Ø inside (C): 33.5 mm · Ø inside 2 (D): 33.5 mm · Color: black · Ø outside (E): 46.5 mm · Ø outside 2 (F): 46.5 mm · Ø External connection (G): 46.5 mm · Ø External connection 2 (H): 46.5 mm · Ø Clamping (I): 32.5 mm · Ø Clamping 2 (K): 32.5 mm
EUR 15.80
Rear fender blank | Puch Maxi S, Supermaxi LG1 / LG2
Material: Steel · Surface: blank / oiled · Color: silver · Folding the ends: not folded · Folding the ends: open folded · Shape of the mudguard: angular · Total length over ends: 420 mm · Scope: 480 mm · Wide mudguard profile: 73 mm · Wide mudguard profile: 75 mm · Height of mudguard profile: 30 mm · Height of mudguard profile: 60 mm · Total height from support surface to top edge: 110 mm · Wheel size: 17 " · Mounting type: Weld
EUR 36.60
Collection only possible with online purchase and appointment.
