Black, adjustable shock absorbers with pink coil springs for your moped, moped and small motorcycle.
The hardness or preload of the shock absorbers can be adjusted using the special spring mount.
Length (mount - mount): 300 mm
Outer diameter of coil spring: 50 mm
Holt diameter: 30 mm
Wall diameter for mounting: 10 mm
The rear springs should always be secured with large washers to prevent the plastic bushes from shifting if lateral forces occur.
The scope of delivery corresponds to one pair.
Rear springs from other manufacturers, the matching adjustment key as well as the washers and fastening material can be found in the accessories section.
| Surface | varnished |
| Damping type | Spring |
| Adjustable | Yes |
| Ø outside | 50 mm |
| Ø spars | 30 mm |
| Ø Fastening inside | 10 mm |
| Hole spacing | 300 mm |
| Total length | 330 mm |
| Mounting type | Nuts & bolts |
| Number of fixing points | 2 pcs |
| Color | pink, black |
Ratings
Accessories & related products
Loctite 243 medium-strength threadlocker 10 ml
Temperature resistance (min.): -75 - 200 °C · Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Area of application: Chemistry · Contents: 10 ml · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Color: blue · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Gap dimension (max.): 0.01 mm · Type of application: 1K · Alignment time: 600 sec · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
EUR 26.90
EUR 2’690.00/l
YSS shock absorber Racing 30 cm (oil pressure)
Manufacturer: YSS · Material: Steel · Surface: varnished · Color: black · Damping type: Hydraulic (oil) · Adjustable: Yes · Hole spacing: 330 mm · Ø outside: 52 mm · Total length: 335 mm · Ø spars: 32 mm · Ø Fastening inside: 10 mm · Number of fixing points: 2 pcs · Mounting type: Nuts & bolts
EUR 171.50
swiing® revival screws & axle set shock absorber | Puch Maxi S
Manufacturer: swiing® revival parts · Material: Chrome steel (colloquially known as stainless steel) · Material: Steel · Number of components: 17 pcs · Thread type: M8x1.25 (standard thread) · Drive: External hexagon · Screw head: Hexagon
EUR 21.90
MKX shock absorber 30 cm chrome
Total length: 335 mm · Manufacturer: MKX · Material: Aluminum · Material: Steel · Surface: chrome-plated · Damping type: Spring · Adjustable: Yes · Ø outside: 46 mm · Ø spars: 24 mm · Color: Chrome · Mounting type: Nuts & bolts · Number of fixing points: 2 pcs · Ø Fastening inside: 8 mm · Ø Fastening inside: 10 mm · Hole spacing: 300 mm
EUR 61.20
Explore categories from Shock absorber & swingarm
Moped fans also bought
Inox
Hot 
GPO license plate holder Inox (CH version)
Total length: 145 mm · Width: 105 mm · Height: 5.3 mm · Manufacturer: GPO · Material: Chrome steel (colloquially known as stainless steel) · Ø mounting hole: 5 mm · Color: silver · Thread length: 8 mm · Mounting type: Nuts & bolts · Number of fixing points: 2 pcs · Thread type: M5x0.8 (standard thread) · Hole spacing: 30 mm · Hole spacing: 50 mm
EUR 13.40
Hot
BERU spark plug connector / 1 kΩ interference suppressed
Ø cable: 5 mm · Ø cable: 7 mm · Manufacturer: BERU · Material: Sheet metal (steel) · Spark plug socket: M4 · Cable available: No · Color: silver · Suppressed: Yes · Resistance: 1000 Ω · Subcategory: Spark plug connector · Pony OEM number: A2099 · Sachs OEM no.: 0265 100 00
EUR 10.80
GPO 15 mm carburetor tuning | Puch
Nominal diameter: 15 mm · Total length: 66 mm · Width: 50 mm · Height: 95 mm · Manufacturer: GPO · Material: Aluminum · Component group Carburetor: Carburetor complete · Carburetor type: SRE · Mounting type: Plug connection clamped · Ø Internal connection: 20 mm · Ø Inside entrance: 15 mm · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.17 · Camouflaged: No · Nozzle size: 62 · Area of application: Tuning · Clamping screw torque (max.): 4 N/m
EUR 79.60
Not so nice 
15 mm intake manifold | Puch E50
Area of application: Tuning · Material: Aluminum · Ø inside: 14.5 mm · Mounting type: Screws · Total height: 54 mm · Number of fixing points: 2 pcs · Ø External connection: 20 mm · Total length: 47 mm · Hole spacing inlet: 38 mm · Height flange center hole: 43 mm · Camouflaged: Yes
EUR 14.60
GPO chain tensioner | Puch Maxi S
Total length: 175 mm · Manufacturer: GPO · Material: Plastic · Material: Steel · Surface: galvanized (blue) · Number of teeth: 10 pcs · Color: black · Color: silver · Ø outside sprocket: 36 mm · Number of fixing points: 1 pcs · Thread type: M6x1 (standard thread)
EUR 12.10
Attention: new opening hours from 16.02.2026 & new evening sale on Thursday 17:30-20:00
