Solid clutch puller for the original clutch and clutches with corresponding hole spacing on your Puch Maxi moped / moped and others with E50 engine.
The clutch pack is screwed on cleanly with the black screws. The large, galvanized screw can then be used to apply pressure to the crankshaft to lift the clutch.
The matching, red anodized cover should always be used to protect the KW stub.
Attention: The tool only fits the original clutch and replacement clutches from Surflex.
Clutch hole spacing: 32 mm
Clutch thread: M6
Ø inner shaft cover: 12.1 mm
You can find the corresponding clutch and other special tools for the E50 engine in the accessories section.
Exceptional product for the highest demands of the quality brand swiing®.
Original Puch spare part number: 905.6.34.109.0
| Manufacturer | swiing |
| Area of application | (Dis)assembly tool |
| Puch | E50 |
Accessories & related products
HK clutch "Racing" Aramid | Puch E50
Manufacturer: HK Clutches · Material: Steel · Material addition: Chrome steel (known as Nirosta®) · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Number of jaws: 3 pcs · Recording type: Cone mounting · Number of springs: 3 pcs
EUR 366.20
Not in stock
Moped fans like you also bought:
Clutch 3-jaw aluminum | Puch E50
Manufacturer: GPO · Material: Aluminum · Material: Steel · Material addition: Composite materials · Number of springs: 3 pcs · Recording type: Cone mounting · Ø inside: 12 mm · Ø inside: 14.6 mm · Number of jaws: 3 pcs · Ø outside: 93 mm · Area of application: Original · Area of application: Standard · Thickness: 20.9 mm
EUR 60.90
swiing® ingenious clutch springs reinforced (+20%) | Puch E50
Spring design: Pressure spring · Ø wire: 1.7 mm · Manufacturer: swiing® ingenious parts · Material: Spring steel · Surface: coated · Color: blue · Total length: 28 mm · Ø inside: 4.8 mm · Ø outside: 8.3 mm · Area of application: Tuning · Number of components: 3 pcs
EUR 21.90
GPO flywheel trigger M26x1.5 / M22x1.5 | Puch, Sachs, Beta 521
Width across flats (trigger): 27 mm · Manufacturer: GPO · Clamping depth: 10 mm · Material: Steel · Surface: blackened · Total length: 55 mm · Total length: 75 mm · Thread type: MF22x1.5 (fine pitch thread) · Thread type: MF26x1.5 (fine pitch thread) · Area of application: (Dis)assembly tool · Width across flats Screw: 19 mm · Strength class: 8.8 · Number of components: 1 pcs
EUR 12.10
GPO gasket set | Puch E50
Manufacturer: GPO · Material: Aluminum · Material: Fiber · Material: Sealing carton · Material: Sealing paper · Ø outlet inside: 19.9 mm · Area of application: Standard · Hole pattern [mm]: 44 x 44 · Hole spacing inlet: 32 - 38 mm · Decompressor: Yes · Number of components: 7 pcs · Hole spacing outlet: 42 mm
EUR 12.10
swiing® revival gasket gearbox cover engine 0.5 mm | Puch E50
Manufacturer: swiing® revival parts · Material: Sealing paper · Color: sand-colored · Ø inside: 106 mm · Ø outside: 116 mm · Thickness: 0.5 mm · Number of fixing points: 4 pcs · Number of components: 1 pcs · Alternative version of the Puch OEM number: 349.1.10.349.1
EUR 3.55
swiing® revival gasket gearbox cover engine 1 mm | Puch E50
Manufacturer: swiing® revival parts · Material: Sealing paper · Color: sand-colored · Ø inside: 106 mm · Ø outside: 116 mm · Thickness: 1 mm · Number of fixing points: 4 pcs · Number of components: 1 pcs · Alternative version of the Puch OEM number: 349.1.10.349.1
EUR 4.75
DMP clutch "Racing" aluminum reinforced | Puch E50
Material: Steel · Manufacturer: DMP · Material addition: Chrome steel (known as Nirosta®) · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Number of jaws: 3 pcs · Recording type: Cone mounting · Ø outside: 94 mm · Number of springs: 3 pcs · Thickness: 22 mm
EUR 146.40
Collection only possible with online purchase and appointment.
