Set 15 mm tuning intake manifold suitable for your Puch Maxi S / N moped / moped with 1-speed E50 engine.
From the factory, the original counterpart with 14 mm diameter and round intake window was installed on Austrian Puch mopeds.
The tuning intake manifold is therefore additionally provided with an embedded «14» for camouflage. When installed, the intake manifold is therefore visually indistinguishable from the original.
The cylinder-side shape corresponds to the intake window shape used by various racing engines, such as those used by swiing® or Airsal, among others.
| Manufacturer | swiing® ingenious parts |
| Material | Aluminum |
| Ø inside | 15 mm |
| Ø External connection | 20 mm |
| Hole spacing inlet | 38 mm |
| Mounting type | Nuts |
| Total height | 52 mm |
| Height flange center hole | 40 mm |
| Number of fixing points | 2 pcs |
| Camouflaged | Yes |
| Puch | E50 |
Ratings
Accessories & related products
Hot 
swiing® ingenious 15 mm carburetor camouflaged | Puch
Nominal diameter: 15 mm · Manufacturer: swiing® ingenious parts · Material: Aluminum · Component group Carburetor: Carburetor complete · Carburetor type: SRE · Width: 50 mm · Ø Internal connection: 20 mm · Total length: 66 mm · Height: 95 mm · Mounting type: Plug connection clamped · Ø Inside entrance: 15 mm · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.17 · Camouflaged: Yes · Nozzle size: 62 · Area of application: Tuning · Clamping screw torque (max.): 4 N/m · Puch OEM number: 349.1.15.100.0 · Puch OEM number: 349.2.15.800.0 · Puch OEM number: 349.4.15.500.0 · Puch OEM number: 349.4.15.000.0 · Puch OEM number: 349.4.15.300.0 · Puch OEM number: 349.6.15.400.0 · Puch OEM number: 349.7.15.700.0 · Puch OEM number: 349.8.15.400.0 · Puch OEM number: 349.9.15.300.0
EUR 97.90
Hot
swiing® ingenious 15 mm intake manifold camouflaged | Puch E50
Manufacturer: swiing® ingenious parts · Material: Aluminum · Ø inside: 15 mm · Total length: 46 mm · Mounting type: Screws · Number of fixing points: 2 pcs · Hole spacing inlet: 38 mm · Total height: 53 mm · Ø External connection: 20 mm · Height flange center hole: 43 mm · Camouflaged: Yes · Area of application: Tuning · Puch OEM number: 349.2.15.330.1 · Puch OEM number: 349.2.15.130.1
EUR 42.80
swiing® revival 14 mm intake manifold round inlet (AT version) | Puch E50
Ø inside: 14 mm · Manufacturer: swiing® revival parts · Material: Aluminum · Camouflaged: No · Area of application: Original · Total length: 45.5 mm · Number of fixing points: 2 pcs · Total height: 52.5 mm · Height flange center hole: 42.5 mm · Ø External connection: 20 mm · Mounting type: Flange · Hole spacing inlet: 38.5 - 38 mm
EUR 42.80
EUR 30.50
swiing® ingenious 4 mm intake gasket 15 mm intake manifold square | Puch E50, Z50, ZA50
Nominal diameter: 15 mm · Thickness: 4 mm · Manufacturer: swiing® ingenious parts · Material: Oiled paper · Material: Phenolic resin (colloquially known as Bakelite) · Place of use: Admission · Ø inside: 15 mm · Hole spacing inlet: 38 mm · Ø screw holder: 6.2 mm
EUR 9.20
Explore categories from Carburetor & intake system
Moped fans also bought
Airsal 45 mm cylinder kit 70 ccm camouflaged | Puch
Nominal diameter: 45 mm · Manufacturer: Airsal · Material: Aluminum · Surface: sandblasted · Displacement: 70 ccm · Crankshaft stroke: 43 mm · Ø cylinder neck: 48 mm · Ø outlet inside: 25 mm · Inlet window: 23.5 / 20 x 15 · Thread inlet: M6x1 (standard thread) · Number of fixing points: 4 pcs · Hole spacing inlet: 38 mm · Ø piston pin (B): 12 mm · Outlet type: straight · Hole spacing outlet: 42 mm · Thread outlet: M6x1 (standard thread) · Hole pattern [mm]: 44 x 44 · Decompressor: Yes · Camouflaged: Yes · Area of application: Tuning
EUR 122.40
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Manufacturer: Magura · Material: Brass · Material: Steel · Surface: nickel-plated · Thread type: M4x0.7 (standard thread) · Ø outside: 5 mm · Ø Cable bushing: 1.6 mm · Drive: Slot · Screw head: Lens head · Total length: 6 mm · Thread length: 4 mm · Number of components: 2 pcs
EUR 2.45
Side stand chrome | Puch Maxi S / N, Supermaxi LG1 / LG2, X30 NS / NL / NG-2AH, P1
Manufacturer: Made in Portugal · Material: Steel · Surface: chrome-plated · Surface: powder-coated · Color: Chrome · Adjustable: Yes · Color: black · Length pivot point - floor: 220 mm · Total length: 345 mm · Mounting type: Screwed clamp · Number of fixing points: 2 pcs
EUR 23.90
MBR clutch basket Racing 21 teeth angled | Puch E50
Manufacturer: MBR · Material: Steel · Area of application: Tuning · Color: silver · Ø Receptacle: 31 mm · Toothing type: helical toothed · Ø inside: 15 mm · Ø inside: 17 mm · Number of teeth: 21 pcs · Height: 49.2 mm · Recording type: Interlocking · Ø outside: 99.5 mm
EUR 220.50
PROMA Exhaust Grand Prix | Puch
Total length: 1000 mm · Ø outside: 73 mm · Manufacturer: PROMA · Material: Aluminum · Material: Steel · Color: graphite colors · Color: silver · Surface: varnished · Mounting type: Welded lug · Ø Internal connection: 22 mm · Ø Silencer: 60 mm · Number of fixing points: 3 pcs · Ø Flame tube outside: 25 mm · Exhaust type: Cone / double cone · Flame tube attachment: Flange
EUR 167.80
Attention: new opening hours from 16.02.2026 & new evening sale on Thursday 17:30-20:00
