Special holding tool that simplifies work on the clutch or the ignition on your moped, moped and small motorcycle.
The matching bolt is pushed into the upper connecting rod eye and the plastic plate is used to cover the opening to the engine housing. When working on the flywheel, the bolt will then rest cleanly on the plate and the nut can be loosened and tightened without any problems.
The second picture serves to illustrate this.
With this simple tool, you save yourself the purchase of various different counterholders and have the right assembly tool to hand for all engines.
Alternative counterholders can be found under accessories.
Exceptional product for the highest demands of the quality brand swiing®.
| Number of components | 4 pcs |
| Manufacturer | swiing® ingenious parts |
| Material | Plastic |
| Diameter | 10 mm, 12 mm, 15 mm |
Ratings
Accessories & related products
swiing® ingenious flywheel holder 3 pins (Bosch / Ducati flywheels)
Manufacturer: swiing® ingenious parts · Area of application: Special tool · Material: Steel · Surface: galvanized (blue) · Surface: rubberized · Number of components: 1 pcs · Total length: 290 mm · Height: 80 mm · Thickness: 5 mm · Diameter: 19 mm · Ø inside: 27 mm · Ø outside: 93 mm · Ø Pin: 8 mm
EUR 58.70
Not in stock
Explore categories from Tools
Moped fans also bought
Hot 
BERU spark plug connector / 1 kΩ interference suppressed
Ø cable: 5 mm · Ø cable: 7 mm · Manufacturer: BERU · Material: Sheet metal (steel) · Color: silver · Spark plug socket: M4 · Cable available: No · Suppressed: Yes · Resistance: 1000 Ω · Subcategory: Spark plug connector · Pony OEM number: A2099 · Sachs OEM no.: 0265 100 00
EUR 10.80
Magura cable clamp Ø 8 x 15 mm
Drive: External hexagon · Drive: Slot · Ø Cable bushing: 2.3 mm · Manufacturer: Magura · Material: Brass · Material: Steel · Surface: galvanized (blue) · Surface: nickel-plated · Thread type: M6x1 (standard thread) · Total length: 15 mm · Ø Bundle: 6 mm · Screw head: Hexagon · Width across flats: 7 mm · Ø outside: 8 mm · Area of application: Standard · Thread length: 7 mm
EUR 3.05
Airsal 45 mm cylinder kit 70 ccm camouflaged | Puch
Manufacturer: Airsal · Displacement: 70 ccm · Nominal diameter: 45 mm · Crankshaft stroke: 43 mm · Ø piston pin (B): 12 mm · Material: Aluminum · Surface: sandblasted · Ø cylinder neck: 48 mm · Ø outlet inside: 25 mm · Inlet window: 23.5 / 20 x 15 · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 38 mm · Outlet type: straight · Hole spacing outlet: 42 mm · Thread outlet: M6x1 (standard thread) · Hole pattern [mm]: 44 x 44 · Decompressor: Yes · Number of fixing points: 4 pcs · Camouflaged: Yes · Area of application: Tuning
EUR 122.40
Hot
Inner cable set automatic | Puch E50
Manufacturer: Made in Germany · Material: Steel · Ø Stranded wire: 1.25 mm · Ø Stranded wire: 1.5 mm · Ø Stranded wire: 1.8 mm · Quantity: 4 pcs · Total length: 1600 mm · Total length: 2200 mm · Nipple shape: Barrel (transverse) · Nipple shape: Cylinder · Nipple shape: Pears
EUR 12.10
Cable set E50 engine automatic black | Puch Maxi S / N
Material: Steel · Color: black · Quantity: 4 pcs · Ø Stranded wire: 1.25 mm · Ø Stranded wire: 1.5 mm · Ø Stranded wire: 1.8 mm · Total length: 1600 mm · Total length: 2200 mm · Outer shell length: 6000 mm · Nipple shape: Barrel (transverse) · Nipple shape: Cylinder · Nipple shape: Pears
EUR 23.90
swiing® revival rear brake anchor plate | Puch Maxi N
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Ø outside: 92 mm · Ø External brake pads: 80 mm · Ø axle: 12 mm · Ø shaft: 10 mm · Ø bore: 12.2 mm · Ø screw holder: 6.5 mm · Wide cam holder: 12 mm · Total length: 135 mm · Brake lever length (lever length): 68 mm · Cranking (offset): 10 mm
EUR 91.80
Attention: new opening hours from 16.02.2026 & new evening sale on Thursday 17:30-20:00
