Rear mudguard made of stainless steel for various mopeds with 17-inch rims.
The highly polished surface ensures a first-class look and gives your moped the necessary shine.
Since the mudguard is folded at the rear, there is no sharp edge, which significantly reduces the risk of injury.
Tabs for cable routing are attached to the inside.
The mudguard deliberately has no holes for struts so that you can drill them individually.
Shape: round
Width of mudguard profile (A): 80 mm
Height of mudguard profile (B): 35 mm
End: closed folded / not folded
Material: chrome steel (colloquially known as stainless steel), highly polished
Total height from support surface to top edge (C): 325 mm
Total length over ends (D): 623 mm
Circumference (E): 1006 mm
Further parts for your wheel fairing, such as stainless steel polish or fastening material, can be found in the accessories section.
Nostalgic product for the highest demands from the quality brand swiing®.
| Manufacturer | swiing® revival parts |
| Material | Chrome steel (colloquially known as stainless steel) |
| Surface | polished |
| Color | Chrome |
| Wheel size | 17 " |
| Folding the ends | closed folded, not folded |
| Shape of the mudguard | partly round |
| Total length over ends | 623 mm |
| Scope | 1006 mm |
| Wide mudguard profile | 80 mm |
| Height of mudguard profile | 35 mm |
| Total height from support surface to top edge | 325 mm |
| Mounting type | Nuts & bolts |
Accessories & related products
Inox
Hot 
GPO license plate holder Inox (CH version)
Total length: 145 mm · Height: 5.3 mm · Width: 105 mm · Manufacturer: GPO · Material: Chrome steel (colloquially known as stainless steel) · Color: silver · Thread type: M5x0.8 (standard thread) · Thread length: 8 mm · Number of fixing points: 2 pcs · Ø mounting hole: 5 mm · Hole spacing: 30 mm · Hole spacing: 50 mm · Mounting type: Nuts & bolts
EUR 13.40
swiing® revival 17" front fender "Retro" Inox
Manufacturer: swiing® revival parts · Material: Chrome steel (colloquially known as stainless steel) · Surface: polished · Color: Chrome · Folding the ends: closed folded · Shape of the mudguard: round · Total length over ends: 560 mm · Scope: 700 mm · Wide mudguard profile: 80 mm · Height of mudguard profile: 35 mm · Total height from support surface to top edge: 180 mm · Wheel size: 17 " · Mounting type: Nuts & bolts
EUR 73.40
Mudguard strut 17" chrome
Manufacturer: Made in Italy · Material: Steel · Color: Chrome · Surface: chrome-plated · Distance mudguard - center hole: 315 mm · Wide intake: 65 mm · Number of fixing points: 5 pcs · Ø mounting hole: 5.5 mm · Ø mounting hole: 10.8 mm · Hole spacing: 19 mm · Wheel size: 17 " · Total length: 325 mm · Mounting type: Nuts & bolts
EUR 15.80
Mudguard strut 16" chrome
Manufacturer: Made in Italy · Material: Steel · Surface: galvanized (blue) · Distance mudguard - center hole: 290 mm · Ø mounting hole: 5.5 mm · Ø mounting hole: 10.8 mm · Wide intake: 75 mm · Total length: 305 mm · Wheel size: 16 " · Number of fixing points: 5 pcs · Mounting type: Nuts & bolts
EUR 20.70
GPO license plate holder Inox black (CH version)
Manufacturer: GPO · Material: Chrome steel (colloquially known as stainless steel) · Surface: varnished · Color: black-matt · Ø mounting hole: 5 mm · Thread type: M5x0.8 (standard thread) · Number of fixing points: 6 pcs · Mounting type: Nuts & bolts · Total length: 147 mm · Width: 105 mm · Height: 6 mm
EUR 15.80
Not in stock
Explore categories from Mudguard
Moped fans also bought
Inox
Hot
GPO license plate holder Inox (CH version)
Total length: 145 mm · Height: 5.3 mm · Width: 105 mm · Manufacturer: GPO · Material: Chrome steel (colloquially known as stainless steel) · Color: silver · Thread type: M5x0.8 (standard thread) · Thread length: 8 mm · Number of fixing points: 2 pcs · Ø mounting hole: 5 mm · Hole spacing: 30 mm · Hole spacing: 50 mm · Mounting type: Nuts & bolts
EUR 13.40
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Total length: 6 mm · Ø outside: 5 mm · Ø Cable bushing: 1.6 mm · Manufacturer: Magura · Number of components: 2 pcs · Material: Brass · Material: Steel · Surface: nickel-plated · Thread type: M4x0.7 (standard thread) · Drive: Slot · Thread length: 4 mm · Screw head: Lens head
EUR 2.45
Motorex engine oil (gear oil) manual 450 ml
Temperature resistance (min.): -30 - 220 °C · Manufacturer: Motorex · Viscosity (SAE): 80W · Oil type: GL4 · Contents: 450 ml · Gearbox type: Foot control · Gearbox type: Manual gearshift · Area of application: Gearbox lubrication with clutch
EUR 13.40
EUR 29.78/l
ESJOT drive chain 415H (reinforced) 114L (1A quality)
Chain type: 415H · Ø Pin: 4 mm · Manufacturer: ESJOT · Material: Steel · Surface: blank / oiled · Color: gray · Rolling circumference: 1448 mm · Chain pitch: 1/2" x 3/16" · Number of chain links: 114 pcs · Chain lock type: Spring lock · Ø bore: 4.05 mm
EUR 23.20
Clutch cable / brake cable Ø 1.5 mm x 225 cm (pear-shaped nipple)
Ø nipple: 3.5 mm · Ø nipple: 6 mm · Nipple length: 10 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Ø Stranded wire: 1.5 mm · Cable length: 2250 mm · Nipple shape: Pears · Number of components: 1 pcs · Area of application: Standard · Piaggio OEM number: 270460
EUR 2.95
Not in stock
Cable sleeve, Ø 5 x 2.2 mm, black (6-meter roll)
Ø cable: 2.2 mm · Total length: 6000 mm · Ø inside: 2.5 mm · Ø outside: 5 mm · Coating: none · Manufacturer: Made in Italy · Ordering unit: Roll 6 meter · Material: Plastic · Material: Steel · Color: black · Area of application: Standard
EUR 14.60
EUR 2.43/m
Hot
Manual indoor cable set
Ø Stranded wire: 1.2 mm · Ø Stranded wire: 1.25 mm · Ø Stranded wire: 1.5 mm · Ø Stranded wire: 1.8 mm · Total length: 2200 mm · Manufacturer: Made in Germany · Material: Steel · Quantity: 4 pcs · Nipple shape: Barrel (transverse) · Nipple shape: Cylinder · Nipple shape: Pears
EUR 12.10
ESJOT sprocket 37 teeth coaster brake galvanized
Chain type: 415H · Ø inside: 94 mm · Manufacturer: ESJOT · Material: Steel · Color: silver · Surface: galvanized (blue) · Number of teeth: 37 pcs · Chain pitch: 1/2" x 3/16" · Ø mounting hole: 6.5 mm · Thickness: 4.1 mm · Ø bolt circle: 105.5 mm · Number of fixing points: 4 pcs · Hole spacing: 74 mm
EUR 58.70
swiing® revival air filter Racing | Sachs 503
Total length: 165 mm · Height: 52 mm · Width: 68 mm · Manufacturer: swiing® revival parts · Camouflaged: No · Material: Plastic · Color: black · Filter type: Racing screen · Ø Internal connection: 20 mm · Mounting type: Plug connection clamped · Area of application: Tuning
EUR 73.40
swiing® revival 17" front fender "Retro" Inox
Manufacturer: swiing® revival parts · Material: Chrome steel (colloquially known as stainless steel) · Surface: polished · Color: Chrome · Folding the ends: closed folded · Shape of the mudguard: round · Total length over ends: 560 mm · Scope: 700 mm · Wide mudguard profile: 80 mm · Height of mudguard profile: 35 mm · Total height from support surface to top edge: 180 mm · Wheel size: 17 " · Mounting type: Nuts & bolts
EUR 73.40
Working late? Evening hours on Thursday until 20:00
