Montageanleitung 
Hot 
Authentic 38-mm replica cylinder kit with 1.2 PS, compatible with your Puch moped.
This cylinder kit is an alternative to the original Puch cylinder. The swiing® revival cylinder is designed as a faithful replacement for anyone who wants to preserve the classic character of their Puch. The cylinder’s performance also matches that of the original. The characteristic “CH12” marking is cast directly into the cylinder, just like on the original.
In the reproduction, emphasis was placed on a clean and well-thought-out design. The piston features lubrication holes for the piston pin and flat-milled inner surfaces for smooth guidance of the connecting rod bearing. The sealing surfaces at the intake and exhaust are also generously flat-milled, allowing the intake manifold and exhaust to be installed without any problems.
You can find detailed installation instructions in the video below.
Note: Please observe the installation direction during assembly. The piston is installed with the arrow pointing toward the exhaust on the exhaust side.
A nostalgic product from the premium swiing® brand that meets the highest standards.
| Manufacturer | swiing® revival parts |
| Displacement | 50 ccm |
| Crankshaft stroke | 43 mm |
| Material | Aluminum |
| Nominal diameter | 38 mm |
| Surface | sandblasted |
| Ø cylinder neck | 48 mm |
| Camouflaged | Yes |
| Ø Inlet inside | 9 mm |
| Number of fixing points | 4 pcs |
| Hole pattern [mm] | 44 x 44 |
| Ø outlet inside | 19 mm |
| Thread inlet | M6x1 (standard thread) |
| Ø piston pin (B) | 12 mm |
| Hole spacing outlet | 42 mm |
| Hole spacing inlet | 38 mm |
| Outlet type | straight |
| Thread outlet | M6x1 (standard thread) |
| Decompressor | Yes |
| Area of application | Standard |
| Alternative version of the Puch OEM number | 349.7.10.105.0 |
| Puch | E50 Z50 (X30 Sport) |
Accessories & related products
Hot
GPO 38 mm cylinder head original | Puch Maxi S, N / X30 NS, NL, N-2AH
Manufacturer: GPO · Material: Aluminum · Surface: sandblasted · Ø cylinder: 38 mm · Number of fixing points: 4 pcs · Candle thread: short · Decompressor: No · Hole pattern [mm]: 44 x 44 · Total length: 135 mm · Width: 125 mm · Height: 55 mm · Area of application: Standard
EUR 40.30
swiing® revival stud bolt M6x106 (10.9 strength class)
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Thread type: M6x1 (standard thread) · Nominal diameter (thread): 6 mm · Thread length: 12 mm · Thread length: 20 mm · Total length: 106 mm · Puch OEM number: 360.1.10.034.1
EUR 2.20
GPO gasket set cylinder original | Puch Maxi S, N / X30 NS, NL, N-2AH
Manufacturer: GPO · Ø cylinder: 38 mm · Thickness: 0.39 mm · Thickness: 0.4 mm · Thickness: 0.45 mm · Thickness: 1.7 mm · Material: Aluminum · Material: Sealing paper · Ø outlet inside: 20 mm · Hole pattern [mm]: 44 x 44 mm · Hole spacing outlet: 42 mm · Number of components: 4 pcs · Hole spacing inlet: 32 - 38 mm · Decompressor: Yes · Area of application: Standard
EUR 9.10
swiing® revival 12 mm carburetor set "original" | Puch E50
Nominal diameter: 12 mm · Manufacturer: swiing® revival parts · Component group Carburetor: Carburetor complete · Carburetor type: SRE · Ø Internal connection: 20 mm · Ø Inside entrance: 12 mm · Ø Output inside: 12 mm · Ø Air filter connection: 20 mm · Hole spacing inlet: 38 mm · Ø fuel hose connection: 6 mm · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Camouflaged: No · Nozzle size: 52 · Mounting type: Flange · Mounting type: Plug connection clamped · Clamping screw torque (max.): 4 N/m · Area of application: Standard
EUR 116.30
swiing® revival piston 38 mm Vertex | Puch
Nominal diameter: 38 mm · Manufacturer: Vertex · Manufacturer: swiing® revival parts · Ø outside piston (A): 37.96 mm · Compression height (C): 22.45 mm · Curvature (D): 3.5 mm · Total piston height (E): 50.45 mm · Number of piston rings (F): 2 pcs · Piston ring mold: Rectangular ring · Piston ring impact: Flank safety device (FS) · Ø piston pin (B): 12 mm · Piston ring height: 1.5 mm · Thick piston ring: 1.6 mm · Tolerance group: A · Weight piston kit: 71 g
EUR 73.40
swiing® ingenious needle roller bearing 12/15/14.2 original silver cage
Bearing type: Needle roller and cage assembly · Bearing cage: Silver cage · Dimension needle bearing: 12/15 x 14.2 · Manufacturer: swiing® ingenious parts · Ø outside: 15 mm · Ø inside: 12 mm · Width: 14.2 mm · Alternative version of the Pony OEM number: A4222 · Tomos OEM number: 035548 · Alternative version of the Sachs OEM number: 0232 157 001
EUR 14.60
swiing® revival piston 38 mm 1.6 hp | Puch
Nominal diameter: 38 mm · Manufacturer: swiing® revival parts · Ø outside piston (A): 37.96 mm · Compression height (C): 22.6 mm · Curvature (D): 2.5 mm · Total piston height (E): 50.45 mm · Number of piston rings (F): 2 pcs · Piston ring mold: Rectangular ring · Piston ring impact: Internal fuse (IS) · Ø piston pin (B): 12 mm · Weight piston kit: 74 g
EUR 55.00
Not in stock
Explore categories from Cylinder
Moped fans also bought
Hot
GPO 38 mm cylinder head original | Puch Maxi S, N / X30 NS, NL, N-2AH
Manufacturer: GPO · Material: Aluminum · Surface: sandblasted · Ø cylinder: 38 mm · Number of fixing points: 4 pcs · Candle thread: short · Decompressor: No · Hole pattern [mm]: 44 x 44 · Total length: 135 mm · Width: 125 mm · Height: 55 mm · Area of application: Standard
EUR 40.30
Exhaust 22 mm 2-piece replica (with number) | Puch
Manufacturer: Made in Portugal · Material: Steel · Surface: chrome-plated · Color: Chrome · Ø outside: 58 mm · Number of fixing points: 4 pcs · Ø Flame tube outside: 22 mm · Exhaust type: Flute · Flame tube attachment: Flange · Mounting type: Stud bolts & nuts · Mounting type: Welded lug · Total length: 920 mm
EUR 79.60
Hot
swiing® revival 12 mm carburetor "original" | Puch
Manufacturer: swiing® revival parts · Component group Carburetor: Carburetor complete · Material: Aluminum · Carburetor type: SRE · Nominal diameter: 12 mm · Camouflaged: No · Color: gray · Ø Internal connection: 20 mm · Total length: 65 mm · Ø Inside entrance: 12 mm · Width: 50 mm · Ø Output inside: 12 mm · Height: 108 mm · Ø Air filter connection: 20 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.15 · Nozzle size: 52 · Area of application: Standard · Mounting type: Plug connection clamped · Clamping screw torque (max.): 4 N/m · Puch OEM number: 349.6.15.400.0 · Puch OEM number: 349.7.15.700.0
EUR 85.70
swiing® revival 12 mm intake manifold | Puch E50
Manufacturer: swiing® revival parts · Material: Aluminum · Camouflaged: No · Ø External connection: 20 mm · Number of fixing points: 2 pcs · Ø inside: 12 mm · Total height: 53 mm · Height flange center hole: 43 mm · Hole spacing inlet: 38 mm · Total length: 45.5 mm · Area of application: Original · Mounting type: Screws
EUR 42.80
Hot
swiing® revival nozzle set M3.5 (50 - 60) Bing SRE, SRA, SRC, SRF
Manufacturer: swiing® revival parts · Component group Carburetor: Spraying · Quantity: 11 pcs · Material: Brass · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Nozzle type: Main nozzle · Drive: Slot · Total length: 6 mm · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle size: 50 · Nozzle size: 51 · Nozzle size: 52 · Nozzle size: 53 · Nozzle size: 54 · Nozzle size: 55 · Nozzle size: 56 · Nozzle size: 57 · Nozzle size: 58 · Nozzle size: 59 · Nozzle size: 60
EUR 26.90
Working late? Evening hours on Thursday until 20:00
