Special adjusting screw holder made of aluminum to be able to mount adjusting screws on the old Magura grips on your moped, moped and small motorcycle.
The holder is pushed into the Magura grip with the chamfered side.
Attention: Only applicable to the old Magura grips, where the throttle cable is mounted directly with a cable clamp in the grip tube (not suitable for the new grips with sliding block).
Internal thread: M6x1 mm (standard set screws)
Material: aluminium
Surface: colourless anodized
Figures 4 & 5 show the mount in assembled condition.
Nostalgic product for the highest demands of the quality brand swiing®.
Details
| Manufacturer | swiing® revival parts |
| Material | Aluminum |
| Surface | anodized |
| Thread type | M6x1 (standard thread) |
| Color | silver, transparent |
Suitable for the following models
| Universal | |
| Puch | |
| Sachs | |
| Zündapp Belmondo |
Moped fans like you also bought:
Magura cable clamp Ø 8 x 15 mm
Manufacturer: Magura · Material: Brass · Area of application: Standard · Material: Steel · Surface: galvanized (blue) · Surface: nickel-plated · Thread type: M6x1 (standard thread) · Ø outside: 8 mm · Drive: External hexagon · Drive: Slot · Ø Cable bushing: 2.3 mm · Ø Bundle: 6 mm · Screw head: Hexagon · Total length: 15 mm · Thread length: 7 mm · Width across flats SW: 7 mm
EUR 3.00
Magura adjusting screw brake short
Manufacturer: Magura · Material: Brass · Surface: nickel-plated · Color: silver · Thread type: MF6x0.75 (fine pitch thread) · Drive: Knurled screw · Ø shaft: 6.1 mm · Ø External head: 9.15 mm · Total length: 31 mm · Total length: 40 mm · Thread length: 15 mm · Shank length: 6.9 mm
EUR 4.10
Elring Dirko HT sealing compound gray (silicone) 70 ml permanently elastic up to 315°C
Manufacturer: Elring · Material: Silicone · Color: gray · Contents [ml]: 70 ml · Hazard warning: Causes damage to organs through prolonged or repeated exposure · Gap dimension (max.): 2 mm · Temperature resistance (min.): -60 - 315 °C · Area of application: Chemistry
EUR 23.90
EUR 341.43/l
Magura set screw M6x34 mm lock nut SW10
Slotted: No · Manufacturer: Magura · Ø cable holder: 3.05 mm · Width across flats nut: 10 mm · Width across flats Screw: 8 mm · Material: Brass · Thread type: M6x1 (standard thread) · Surface: nickel-plated · Total length: 34 mm · Thread length: 23 mm · Ø Receptacle: 7.05 mm
EUR 3.00
Crankshaft | Zündapp (Type 434 / 247)
Dimension needle bearing: 12 /15 x 14.2 mm (axe 12) · Material: Steel · Cheek type: standard · Crankshaft stroke: 42 mm · Ø coupling pin / vario pin: 15 mm · Ø piston pin (B): 12 mm · Thread type: MF10x1 (fine pitch thread) · Connecting rod length center-center: 91.5 mm · Total length of crankpin on clutch side: 40.4 mm · Total length crankpin ignition side: 65 mm · Ø crank webs: 85 mm · Weight: 892 g · Thread length: 8.5 mm · Thread length: 14 mm · Ø Connecting rod eye: 16 mm · Ø Bearing seat (clutch side): 15 mm · Ø Bearing seat (ignition side): 15 mm · Wide crank webs: 30 mm · Ø 1st step (on the coupling side): 21 mm · Ø 2nd shoulder (on the clutch side): 9.6 mm · Length of shoulder (ignition side): 35 mm
EUR 192.30
Collection only possible with online purchase and appointment.
