
19 mm tuning intake manifold for Puch X30 Sport mopeds / mopeds with Z50 engine and Puch Maxi models which have an E50 engine installed.
The CNC-milled intake manifold is designed for Dell'Orto PHBG carburettors and has a round opening on the cylinder side.
On the Puch X30 it is still possible to fit the original side skirts, but it is not possible to operate the hand choke or fit an air filter. Cable chokes and replicas of the carburetor with service hatch at the bottom cannot be fitted.
| Manufacturer | AKOA |
| Material | Aluminum |
| Area of application | Tuning |
| Mounting type | Nuts |
| Ø inside | 19 mm |
| Ø External connection | 24 mm |
| Hole spacing inlet | 38 mm |
| Number of fixing points | 2 pcs |
| Camouflaged | No |
| Height flange center hole | 57 mm |
| Total height | 68 mm |
| Puch | E50 Z50 (X30 Sport) |
Accessories & related products
Dell'Orto 19 mm PHBG CS carburetor hand choke
Total length: 82 mm · Width: 70 mm · Height: 124 mm · Manufacturer: Dell'Orto · Material: Aluminum · Component group Carburetor: Carburetor complete · Area of application: Racing · Area of application: Tuning · Color: black · Carburetor type: PHBG CS · Nominal diameter: 19 mm · Mounting type: Plug connection clamped · Ø fuel hose connection: 5.4 mm · Ø fuel hose connection: 6 mm · Ø without reducing sleeve: 26 mm · Nozzle size: 75 · Ø Inside entrance: 19 mm · Ø Internal connection: 24 mm · Ø Output inside: 19 mm · Ø Air filter connection: 32 mm · Ø Air filter connection: 60 mm · Air filter connection thread: MF32x1.25 (fine pitch thread) · Camouflaged: No · Mixed oil connection: Yes · Vacuum connection: Yes · Choke control: Hand choke · Choke nozzle size: 60 · Nozzle thread: M5x0.8 (standard thread) · Size of secondary nozzle: 45
EUR 147.00
swiing® revival nozzle set M5 (92 - 110) Dell'Orto SHA, PHBG
Manufacturer: swiing® revival parts · Component group Carburetor: Spraying · Material: Brass · Quantity: 10 pcs · Carburetor type: PHBG · Carburetor type: SHA · Carburetor type: SHA (Piaggio) · Total length: 8 mm · Nozzle type: Main nozzle · Drive: Slot · Nozzle thread: M5x0.8 (standard thread) · Nozzle size: 92 · Nozzle size: 94 · Nozzle size: 96 · Nozzle size: 98 · Nozzle size: 100 · Nozzle size: 102 · Nozzle size: 104 · Nozzle size: 106 · Nozzle size: 108 · Nozzle size: 110
EUR 25.60
Not in stock
swiing® ingenious intake manifold 16 mm | Puch X30 NS, NL, Sprinter
Ø inside: 16 mm · Manufacturer: swiing® ingenious parts · Material: Aluminum · Ø External connection: 20 mm · Mounting type: Screws · Number of fixing points: 2 pcs · Total height: 70 mm · Hole spacing inlet: 38 mm · Total length: 48 mm · Area of application: Tuning
EUR 61.20
GPO 19.5 mm PHBG AS carburetor hand choke (Dell'Orto replica)
Total length: 71.5 mm · Width: 71 mm · Height: 123 mm · Manufacturer: GPO · Material: Aluminum · Component group Carburetor: Carburetor complete · Area of application: Tuning · Color: black · Carburetor type: PHBG AS · Nominal diameter: 19.5 mm · Mounting type: Plug connection clamped · Ø fuel hose connection: 5.4 mm · Ø fuel hose connection: 6 mm · Ø without reducing sleeve: 26 mm · Nozzle size: 85 · Ø Internal connection: 24 mm · Ø Air filter connection: 32 mm · Air filter connection thread: MF32x1.25 (fine pitch thread) · Camouflaged: No · Mixed oil connection: Yes · Vacuum connection: Yes · Choke control: Hand choke · Choke nozzle size: 55 · Nozzle thread: M5x0.8 (standard thread) · Nozzle block: 262AU · Size of secondary nozzle: 50
EUR 97.90
swiing® ingenious intake manifold 15 mm | Puch X30 NS, NL, Sprinter
Ø inside: 15 mm · Manufacturer: swiing® ingenious parts · Material: Aluminum · Area of application: Tuning · Ø External connection: 20 mm · Mounting type: Screws · Number of fixing points: 2 pcs · Total height: 70 mm · Hole spacing inlet: 38 mm · Total length: 48 mm
EUR 85.70
AKOA intake manifold 19 mm PHBG angular | Puch X30 NS, NL Z50, E50
Ø inside: 19 mm · Manufacturer: AKOA · Material: Aluminum · Area of application: Tuning · Ø External connection: 24 mm · Mounting type: Nuts · Number of fixing points: 2 pcs · Total height: 68 mm · Camouflaged: No · Height flange center hole: 57 mm · Hole spacing inlet: 38 mm
EUR 85.70
Explore categories from Carburetor & intake system
Moped fans also bought
Airsal 46 mm cylinder kit straight exhaust | Puch
Manufacturer: Airsal · Material: Aluminum · Crankshaft stroke: 43 mm · Nominal diameter: 46 mm · Surface: sandblasted · Ø piston pin (B): 12 mm · Hole spacing inlet: 38 mm · Thread inlet: M6x1 (standard thread) · Number of fixing points: 4 pcs · Hole spacing outlet: 42 mm · Camouflaged: No · Outlet type: straight · Thread outlet: M6x1 (standard thread) · Hole pattern [mm]: 44 x 44 · Area of application: Tuning
EUR 214.40
swiing® revival Stud Bolt, Inlet/Outlet M6x30 (Grade 10.9)
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Thread type: M6x1 (standard thread) · Total length: 30 mm · Diameter: 5.95 mm · Nominal diameter (thread): 6 mm · Strength class: 10.9 · Thread length: 12 mm
EUR 2.20
Dell'Orto 19 mm PHBG CS carburetor hand choke
Total length: 82 mm · Width: 70 mm · Height: 124 mm · Manufacturer: Dell'Orto · Material: Aluminum · Component group Carburetor: Carburetor complete · Area of application: Racing · Area of application: Tuning · Color: black · Carburetor type: PHBG CS · Nominal diameter: 19 mm · Mounting type: Plug connection clamped · Ø fuel hose connection: 5.4 mm · Ø fuel hose connection: 6 mm · Ø without reducing sleeve: 26 mm · Nozzle size: 75 · Ø Inside entrance: 19 mm · Ø Internal connection: 24 mm · Ø Output inside: 19 mm · Ø Air filter connection: 32 mm · Ø Air filter connection: 60 mm · Air filter connection thread: MF32x1.25 (fine pitch thread) · Camouflaged: No · Mixed oil connection: Yes · Vacuum connection: Yes · Choke control: Hand choke · Choke nozzle size: 60 · Nozzle thread: M5x0.8 (standard thread) · Size of secondary nozzle: 45
EUR 147.00
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø nipple: 3 mm · Manufacturer: Made in Germany · Area of application: Standard · Material: Steel · Surface: galvanized (blue) · Number of components: 1 pcs · Ø Stranded wire: 1.25 mm · Cable length: 2200 mm · Nipple shape: Cylinder · Nipple length: 5 mm
EUR 2.95
GPO gasket set 43.5 & 45 mm (Metrakit replica) | Puch
Manufacturer: GPO · Material: Aluminum · Material: Graphite / Graphite · Material: Sealing carton · Thickness: 0.4 mm · Thickness: 0.5 mm · Thickness: 2.6 mm · Ø cylinder: 43.5 mm · Ø cylinder: 45 mm · Ø outlet inside: 26.5 mm · Hole spacing outlet: 42 mm · Hole spacing inlet: 38 mm · Number of components: 4 pcs · Hole pattern [mm]: 44 X 44
EUR 18.30












