Base plate suitable for the three-jaw centrifugal clutch of Puch mopeds / mopeds with E50 engines.
The clutch carrier is made of steel and is extended. The mounting pins can be secured with circlips. In addition, M4 threads are cut into the pins so that a reinforcement plate can be fitted.
You can find the mentioned plate, clutch linings, complete clutches and the clutch hub without threaded holes in the accessories section.
Original Puch spare part number: 349.1.12.504.2
| Ø outside | 92.6 mm |
| Thickness | 19.1 mm |
| Material | Steel |
| Recording type | Cone mounting |
| Ø inside | 11.85 mm |
| Number of jaws | 3 pcs |
| Area of application | Standard |
| Puch | E50 |
Accessories & related products
swiing® ingenious clutch springs reinforced (+20%) | Puch E50
Spring design: Pressure spring · Material: Spring steel · Surface: coated · Ø wire: 1.7 mm · Manufacturer: swiing® ingenious parts · Number of components: 3 pcs · Color: blue · Area of application: Tuning · Ø outside: 8.3 mm · Total length: 28 mm · Ø inside: 4.8 mm
EUR 21.90
HK clutch "Racing" (with additional weight) Aramid | Puch E50
Ø outside: 93 mm · Thickness: 21.2 mm · Manufacturer: HK Clutches · Material: Aluminum · Material: Chrome steel (colloquially known as stainless steel) · Material: Steel · Material addition: Composite materials · Recording type: Cone mounting · Ø inside: 12 mm · Ø inside: 14.6 mm · Number of jaws: 3 pcs · Number of springs: 3 pcs · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning
EUR 514.70
EUR 453.40
Hot 
DMP clutch "Racing" aluminum reinforced | Puch E50
Ø outside: 94 mm · Manufacturer: DMP · Material: Steel · Material addition: Chrome steel (colloquially known as stainless steel) · Recording type: Cone mounting · Number of jaws: 3 pcs · Number of springs: 3 pcs · Thickness: 22 mm · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning
EUR 147.00
Explore categories from Clutch
Moped fans also bought
GPO Gasket Set for E50 Engine | Puch Maxi S, N
Material: Aluminum · Material: Fiber · Material: Sealing carton · Material: Sealing paper · Manufacturer: GPO · Number of components: 7 pcs · Area of application: Standard · Ø outlet inside: 19.9 mm · Hole spacing inlet: 32 - 38 mm · Hole spacing outlet: 42 mm · Hole pattern [mm]: 44 x 44 · Decompressor: Yes
EUR 12.10
swiing® ingenious needle roller bearing 12/15/16.2 "Racing" silver cage
Ø inside: 12 mm · Ø outside: 15 mm · Dimension needle bearing: 12/15 x 16.2 · Width: 16.2 mm · Manufacturer: swiing® ingenious parts · Bearing cage: Silver cage · Bearing type: Needle roller and cage assembly · Tomos OEM number: 035548
EUR 17.00
swiing® revival nut / spring washer clutch E50 | Puch Maxi
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Nut type: Hexagon nut 0.8D · Drive: External hexagon · Thread type: MF10x1 (fine pitch thread) · Height: 8 mm · Nominal diameter (thread): 10 mm · Width across flats: 17 mm
EUR 4.80
Hot
ASP clutch conversion kit "woven" 3-jaw Aramid | Puch E50
Thickness: 12 mm · Manufacturer: ASP · Material: Steel · Material addition: Aramid (colloquially known as Kevlar) · Number of jaws: 3 pcs · Number of springs: 6 pcs · Area of application: Racing · Area of application: Tuning
EUR 220.50
Not in stock
Working late? Evening hours on Thursday until 20:00
