Strengthening plate made of high-quality stainless steel for the three-jaw centrifugal clutch of your Puch moped / moped with E50 engine.
This precision-manufactured stabilizing plate prevents bending of the clutch shoe mounting bolts, especially on tuned engines, and thus ensures flawless operation, even under high loads.
The scope of delivery consists of the cover plate, three M4 Torx countersunk screws and three retaining rings.
Note: For mounting on original clutches, three M4 threads must first be inserted into the mounting bolts of the base plate.
An alternative reinforcement plate for the 2-jaw clutch, complete engine clutches and other individual parts can be found under accessories.
Quality product from the Austrian manufacturer A.S.P - Puch Parts.
| Ø inside | 40 mm |
| Manufacturer | ASP |
| Material | Chrome steel (colloquially known as stainless steel) |
| Thickness | 1.55 mm |
| Puch | E50 |
Accessories & related products
ASP clutch 3-jaw "woven" Aramid | Puch E50
Manufacturer: ASP · Area of application: Racing · Material: Steel · Area of application: Tuning · Material addition: Aramid (colloquially known as Kevlar) · Recording type: Cone mounting · Number of jaws: 3 pcs · Ø outside: 91.5 mm · Number of springs: 6 pcs · Thickness: 21.5 mm
EUR 294.10
Not in stock
Explore categories from Clutch
Moped fans also bought
GPO clutch 3-jaw aluminum | Puch E50
Manufacturer: GPO · Material: Aluminum · Material: Steel · Material addition: Composite materials · Number of jaws: 3 pcs · Recording type: Cone mounting · Number of springs: 3 pcs · Ø outside: 93 mm · Ø inside: 12 mm · Ø inside: 14.6 mm · Area of application: Original · Area of application: Standard · Thickness: 20.9 mm
EUR 61.20
swiing® ingenious clutch springs reinforced (+20%) | Puch E50
Spring design: Pressure spring · Ø wire: 1.7 mm · Manufacturer: swiing® ingenious parts · Material: Spring steel · Area of application: Tuning · Surface: coated · Number of components: 3 pcs · Color: blue · Ø outside: 8.3 mm · Total length: 28 mm · Ø inside: 4.8 mm
EUR 21.90
GPO 45 mm cylinder head tuning | Puch Maxi S, N / X30 NS, NL, N-2AH
Manufacturer: GPO · Material: Aluminum · Camouflaged: Yes · Ø cylinder: 45 mm · Width: 125 mm · Height: 55 mm · Total length: 135 mm · Surface: sandblasted · Number of fixing points: 4 pcs · Candle thread: short · Decompressor: No · Area of application: Tuning · Hole pattern [mm]: 44 x 44
EUR 40.30
Airsal gasket set 44 - 45 mm
Manufacturer: Airsal · Material: Aluminum · Material: Sealing carton · Material: Sealing paper · Ø cylinder: 44 mm · Ø cylinder: 45 mm · Number of components: 4 pcs · Hole spacing inlet: 38 mm · Area of application: Tuning · Decompressor: Yes · Hole spacing outlet: 42 mm · Hole pattern [mm]: 44 x 44 mm
EUR 12.10
swiing® revival stud bolt set M6 x 106 | Puch
Manufacturer: swiing® revival parts · Material: Steel · Diameter: 5.9 mm · Nominal diameter (thread): 6 mm · Total length: 106 mm · Drive: External hexagon · Surface: galvanized (blue) · Thread type: M6x1 (standard thread) · Width across flats: 10 mm · Thread length: 13 mm · Thread length: 18.5 mm · Alternative version of the Puch OEM number: 360.1.10.034.1
EUR 9.10
swiing® revival gasket gearbox cover engine 1 mm | Puch E50
Manufacturer: swiing® revival parts · Material: Sealing paper · Color: sand-colored · Number of components: 1 pcs · Number of fixing points: 4 pcs · Ø outside: 116 mm · Ø inside: 106 mm · Thickness: 1 mm · Alternative version of the Puch OEM number: 349.1.10.349.1
EUR 4.80
Attention: new opening hours from 16.02.2026 & new evening sale on Thursday 17:30-20:00
