Left and right replacement lever suitable for Lusito grip units on your moped, moped or small motorcycle.
The brake levers have a smooth contour and no recesses for the fingers.
Length at the pivot point: 130 mm
Ø for lever bolt: 8.1 mm
Ø for mounting nipple: 8.9 mm
Material: aluminum
Note: Before final assembly, check that the mounting nipple is properly inserted and can move freely.
Cast residue from production may still be present in the area of the cable duct, which can be easily removed with a file.
| Manufacturer | Lusito |
| Material lever | Aluminum |
| Color | silver |
| Ø inside | 8.9 mm |
| Total length | 130 mm |
| Number of fixing points | 1 pcs |
Ratings
Accessories & related products
Starter cable Ø 1.5 mm x 160 cm | Puch Maxi
Ø Stranded wire: 1.5 mm · Nipple shape: Barrel (transverse) · Ø nipple: 8 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Cable length: 1600 mm · Number of components: 1 pcs · Nipple length: 12 mm · Area of application: Standard
EUR 2.95
Lusito handle set automatic aluminum black (short gas)
Manufacturer: Lusito · Material: Rubber · Color: black · Color: orange · Surface: powder-coated · Color: silver · Housing material: Aluminum · Material lever: Aluminum · Ø inside: 22 mm · Ø inside: 24 mm · Total length: 130 mm · Total length: 150 mm · Number of components: 6 pcs
EUR 61.40
Moped fans also bought
Hot 
Brake cable Ø 1.8 mm x 220 cm (pear-shaped nipple)
Ø Stranded wire: 1.8 mm · Nipple shape: Pears · Ø nipple: 3.5 mm · Ø nipple: 6 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Cable length: 2200 mm · Number of components: 1 pcs · Nipple length: 10 mm · Area of application: Standard
EUR 2.95
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Manufacturer: Magura · Material: Brass · Material: Steel · Surface: nickel-plated · Thread type: M4x0.7 (standard thread) · Ø outside: 5 mm · Ø Cable bushing: 1.6 mm · Drive: Slot · Total length: 6 mm · Screw head: Lens head · Number of components: 2 pcs · Thread length: 4 mm
EUR 2.45
swiing® revival side protection screw set black | Puch Maxi S
Manufacturer: swiing® revival parts · Material: Plastic · Material: Steel · Surface: galvanized (blue) · Surface: raw · Color: silver · Thread type: M5x0.8 (standard thread) · Drive: Slot · Drive: Triangular head · Thread length: 35 mm · Thread length: 50 mm · Total length: 47 mm · Total length: 60 mm
EUR 15.90
GPO 44 mm cylinder head | Puch Maxi S, N / X30 NS, NL, N-2AH
Manufacturer: GPO · Material: Aluminum · Surface: sandblasted · Width: 125 mm · Ø cylinder: 44 mm · Height: 55 mm · Total length: 135 mm · Candle thread: short · Number of fixing points: 4 pcs · Hole pattern [mm]: 44 x 44 · Decompressor: No · Camouflaged: Yes · Area of application: Tuning
EUR 52.80
CIF Clamping screw front brake | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: CIF · Material: Steel · Surface: galvanized (blue) · Thread type: M7x1 (standard thread) · Ø outside: 11 mm · Drive: External hexagon · Total length: 25 mm · Screw head: Hexagon · Width across flats: 11 mm · Number of components: 6 pcs · Thread length: 19.5 mm · Area of application: Standard
EUR 4.80
Brake cable Ø 1.8 mm x 185 cm (nipple ball)
Ø Stranded wire: 1.8 mm · Nipple shape: Ball · Ø nipple: 5.8 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Cable length: 1850 mm · Nipple length: 6.3 mm · Number of components: 1 pcs · Area of application: Standard
EUR 2.95
Collection only possible with online purchase and appointment.
