High-quality center kickstand for Piaggio Ciao mopeds / mopeds with 14 mm bolts.
This center kickstand was fitted as standard on the newer PX and C24 models.
The center rod is supplied complete with spring, bolt (Ø14x100 mm) and circlips (fuel rings).
Note: Older spoke wheel models had a 10 mm bolt. However, the hole in the P and SC models was often drilled out so that a spokes with a 14 mm axle can be fitted. Check the dimensions of the bolt before purchasing.
You can find more parts for your Piaggio Ciao as well as the main stem with 10 mm bolt in the accessories section.
A quality product made in Italy.
Original Piaggio spare part number: 25523001
| Manufacturer | Made in Italy |
| Color | black |
| Material | Steel |
| Surface | varnished |
| Stand base - center mount (A) | 232 mm |
| Total width of stand base (B) | 200 mm |
| Wide receptacle (C) | 78 mm |
| Ø Receptacle (D) | 14 mm |
| Wide upright foot (F) | 20 mm |
| Total height | 250 mm |
| Piaggio | Ciao - PX, C24 |
Ratings
Accessories & related products
SITO Plus exhaust Ø 24 mm | Piaggio Ciao, Bravo
Color: black · Total length: 690 mm · Manufacturer: SITO · Material: Steel · Surface: varnished · Ø outside: 14 mm · Mounting type: Welded lug · Ø Silencer: 70 mm · Ø Internal connection: 22 mm · Number of fixing points: 1 pcs · Ø Flame tube outside: 24 mm · Exhaust type: Cylindrical · Flame tube attachment: Plug connection clamped
EUR 92.40
Not in stock
Malossi 43 mm cylinder kit 10 mm KoBo new version | Piaggio Ciao, SI, Bravo, Boxer
Nominal diameter: 43 mm · Manufacturer: Malossi · Camouflaged: No · Material: Gray cast iron · Surface: sandblasted · Displacement: 63 ccm · Crankshaft stroke: 43 mm · Ø cylinder neck: 45.6 mm · Ø Outlet outside: 22.5 mm · Ø outlet inside: 18.3 mm · Hole pattern [mm]: 55 x 34 · Number of fixing points: 3 pcs · Ø piston pin (B): 10 mm · Outlet type: clamped · Area of application: Tuning · Decompressor: Yes
EUR 178.80
Main stand 10 mm axle without bolt | Piaggio Ciao P, SC
Color: black · Manufacturer: Made in Italy · Material: Steel · Surface: varnished · Stand base - center mount (A): 230 mm · Total width of stand base (B): 200 mm · Wide receptacle (C): 77 mm · Ø Receptacle (D): 10 mm · Wide upright foot (F): 20 mm · Total height: 250 mm · Piaggio OEM number: 104626
EUR 36.90
Stand bolt Ø 14 mm with circlips | Piaggio Ciao, SI, Bravo, SUPERbravo
Manufacturer: Made in Italy · Material: Steel · Surface: galvanized (blue) · Color: silver · Total length: 112 mm · Mounting type: Circlip · Number of fixing points: 2 pcs · Piaggio OEM number: 164167 · Piaggio OEM number: 214490
EUR 6.05
Main stand 14 mm axle | Piaggio Ciao PX, C24
Material: Steel · Surface: varnished · Stand base - center mount (A): 230 mm · Total width of stand base (B): 210 mm · Color: black · Wide receptacle (C): 80 mm · Ø Receptacle (D): 14 mm · Wide upright foot (F): 15 mm · Total height: 245 mm · Piaggio OEM number: 25523001
EUR 28.30
Dell'Orto 13/13 SHA carburetor & racing air filter set | Piaggio Ciao PX, C24
Height: 96 mm · Manufacturer: Dell'Orto · Manufacturer: Malossi · Total length: 46 mm · Area of application: Tuning · Component group Carburetor: Carburetor complete · Mounting type: Plug connection clamped · Carburetor type: SHA (Piaggio) · Choke control: Hand choke · Nominal diameter: 13 mm · Width: 60 mm · Nozzle thread: M5x0.8 (standard thread) · Ø fuel hose connection: 6 mm · Ø without reducing sleeve: 18 mm · Nozzle size: 66 · Ø Inside entrance: 13 mm · Ø Internal connection: 16 mm · Ø Output inside: 13 mm · Ø Air filter connection: 50.8 mm
EUR 82.60
Moped fans also bought
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Possible lever positions: open / closed / reserve · Thread type: MF12x1 (fine pitch thread) · Material lever: Metal · Filter type: Plastic net · Mounting type: Union nut · Installation direction: horizontal / horizontal · Outlet direction: below · Spare tube shape: curved · Ø fuel hose connection: 6 mm · Reserve level: 70 mm
EUR 12.20
Cable set black | Piaggio Ciao, SI, Bravo, Boxer
Ø Stranded wire: 1.25 mm · Ø Stranded wire: 1.5 mm · Ø Stranded wire: 1.8 mm · Nipple shape: Ball · Nipple shape: Barrel (transverse) · Nipple shape: Pears · Manufacturer: Made in Germany · Material: Steel · Quantity: 4 pcs · Color: black · Total length: 1350 mm · Total length: 1600 mm · Total length: 2180 mm · Outer shell length: 1200 mm · Outer shell length: 1250 mm · Outer shell length: 1300 mm · Outer shell length: 2000 mm
EUR 24.60
Collection only possible with online purchase and appointment.
