Adjustable oil-pressure shock absorbers in black with chrome-plated coil springs for your moped, scooter, and small motorcycle.
The spring stiffness or preload can be adjusted to five different levels using the special spring mount. The rear springs should always be secured with large U-washers to prevent the bearing sleeves from shifting when lateral forces are applied.
Length (mounting point to mounting point): 300 mm
; Outer diameter of coil spring: 52 mm
; Shaft diameter: 32 mm
; Mounting bushings: 10 mm / 12 mm
; Color: black / chrome
The package includes one pair.
Rear springs from other manufacturers, as well as washers and mounting hardware, can be found in the accessories section.
A quality product from the manufacturer YSS.
| Manufacturer | YSS |
| Material | Steel |
| Surface | varnished, chrome-plated |
| Damping type | Hydraulic (oil) |
| Ø outside | 52 mm |
| Total length | 330 mm |
| Color | black, Chrome |
| Ø spars | 32 mm |
| Adjustable | Yes |
| Mounting type | Nuts & bolts |
| Number of fixing points | 2 pcs |
| Ø Fastening inside | 10 mm, 12 mm |
| Hole spacing | 300 mm |
Accessories & related products
Loctite 243 medium-strength threadlocker 10 ml
Temperature resistance (min.): -75 - 200 °C · Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Contents: 10 ml · Color: blue · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Area of application: Chemistry · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Type of application: 1K · Gap dimension (max.): 0.01 mm · Alignment time: 600 sec · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
EUR 26.90
EUR 2’690.00/l
YSS shock absorber Racing 30 cm (oil pressure)
Manufacturer: YSS · Material: Steel · Surface: varnished · Damping type: Hydraulic (oil) · Ø outside: 52 mm · Total length: 335 mm · Color: black · Ø spars: 32 mm · Adjustable: Yes · Mounting type: Nuts & bolts · Number of fixing points: 2 pcs · Ø Fastening inside: 10 mm · Hole spacing: 330 mm
EUR 159.20
IMCA shock absorber 30 cm chrome / black
Manufacturer: IMCA · Material: Steel · Surface: chrome-plated · Surface: varnished · Color: Chrome · Color: black · Damping type: Spring · Adjustable: Yes · Ø outside: 45 mm · Ø Fastening inside: 10 mm · Ø spars: 28 mm · Total length: 330 mm · Mounting type: Nuts & bolts · Hole spacing: 300 mm · Number of fixing points: 2 pcs
EUR 73.40
swiing® revival screw set shock absorber mounting with axle galvanized | Puch Maxi S
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Nominal diameter (thread): 8 mm · Screw head: Hexagon · Drive: External hexagon · Thread type: M8x1.25 (standard thread) · Number of components: 17 pcs
EUR 14.60
swiing® revival screws & axle set shock absorber | Puch Maxi S
Manufacturer: swiing® revival parts · Material: Chrome steel (colloquially known as stainless steel) · Material: Steel · Thread type: M8x1.25 (standard thread) · Nominal diameter (thread): 8 mm · Drive: External hexagon · Screw head: Hexagon · Number of components: 17 pcs
EUR 21.90
Explore categories from Shock absorber & swingarm
Moped fans also bought
Hot 
Wippermann drive chain No.18 (double reinforced)
Material: Steel · Manufacturer: Wippermann · Surface: blank / oiled · Chain pitch: 1/2" x 3/16" · Chain type: 415H · Rolling circumference: 1448 mm · Number of chain links: 114 pcs · Chain lock type: Spring lock · Ø bore: 4.2 mm · Ø Pin: 4.15 mm · Color: gray
EUR 41.60
Hot
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Manufacturer: GPO · Possible lever positions: open / closed / reserve · Thread type: MF12x1 (fine pitch thread) · Material lever: Metal · Filter type: Plastic net · Installation direction: horizontal / horizontal · Outlet direction: below · Mounting type: Union nut · Spare tube shape: curved · Ø fuel hose connection: 6 mm · Reserve level: 70 mm
EUR 12.10
GPO 45 mm cylinder head tuning | Puch Maxi S, N / X30 NS, NL, N-2AH
Manufacturer: GPO · Material: Aluminum · Camouflaged: Yes · Surface: sandblasted · Ø cylinder: 45 mm · Total length: 135 mm · Width: 125 mm · Area of application: Tuning · Number of fixing points: 4 pcs · Height: 55 mm · Candle thread: short · Hole pattern [mm]: 44 x 44 · Decompressor: No
EUR 40.30
Karcoma fuel filter 24 mm plastic / paper
Total length: 35 mm · Total length: 60 mm · Manufacturer: Karcoma · Material: Paper · Material: Plastic · Filter type: Filter paper · Ø inside: 4.7 mm · demountable: No · Ø outside: 24 mm · Color: transparent · Color: yellow · Ø fuel hose connection: 6 mm · Ø fuel hose connection: 7.3 mm
EUR 17.00
Hot
swiing® revival Pedal Crank Set, Chrome | Puch
Manufacturer: swiing® revival parts · Material: Steel · Surface: chrome-plated · Color: Chrome · Total length: 180 mm · Crank length (center-center): 156 mm · Wide intake: 28 mm · Ø Pedal wedge: 9.5 mm · Ø Pedal axle: 16 mm · Cranking (offset): 37 mm · Cranking (offset): 49 mm · Thread type: FG14.3 (9/16" 20G)
EUR 91.80
Working late? Evening hours on Thursday until 20:00
